transmitter and reciver or just transmitter
#1
Junior Member
Thread Starter
Join Date: Jan 2013
Location: , MO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
transmitter and reciver or just transmitter
i am very new at this, i have one of the razers 450 that i would like to up grade to a new transmitter, need to know what to get and do i need to replace the reciver also.
#3
My Feedback: (6)
RE: transmitter and reciver or just transmitter
Razor 450:
What radio / receiver do you have now? If you bought a "Combo" with a radio already included, then you might be out of luck and will have to upgrade radio AND receiver. When using 2.4 there are only a few companies that are compatible. The rest of them you have to buy the receiver of the same brand as the transmitter.
Rafael
ORIGINAL: dbeach2
i am very new at this, i have one of the razers 450 that i would like to up grade to a new transmitter, need to know what to get and do i need to replace the reciver also.
i am very new at this, i have one of the razers 450 that i would like to up grade to a new transmitter, need to know what to get and do i need to replace the reciver also.
Rafael
#4
Junior Member
Thread Starter
Join Date: Jan 2013
Location: , MO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: transmitter and reciver or just transmitter
sorry for the spelling, yes i did get a combo. the trans is a dynam, if i need to buy both then what do you think will work for thismodel.
#5
Member
Join Date: Mar 2012
Location: Watkinsville,
GA
Posts: 60
Likes: 0
Received 0 Likes
on
0 Posts
RE: transmitter and reciver or just transmitter
I've done an upgrade to a Honey Bee King 4 and used a Spectrum DX6i with their AR6115 receiver and have been happy with that combo. The DX6i is reasonably priced but if you can afford it many are now suggesting the DX8i. Spectum, E-flite, offers a number of compatible receivers.
#6
Junior Member
Thread Starter
Join Date: Jan 2013
Location: , MO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: transmitter and reciver or just transmitter
i have found some combsof the dx6i with the reciver ar6115 and 4 servos for around 150.00on ebay, is this about the right price. again i do think you for any help.
#8
Junior Member
Thread Starter
Join Date: Jan 2013
Location: , MO
Posts: 6
Likes: 0
Received 0 Likes
on
0 Posts
RE: transmitter and reciver or just transmitter
after check i fou6ind on ebay, i typed in spektrum dx6i and a list came up, the fourth one down is what i belive whatyou think i need. part #spm6625, from what i have read i beleve that it will work with my heli.