BNF Transmitter
#1
Junior Member
Thread Starter
Join Date: Feb 2010
Location: Charlotte,
NC
Posts: 3
Likes: 0
Received 0 Likes
on
0 Posts
BNF Transmitter
Will a 6ch BNF (2.4Ghz) Transmitter work with a 4ch 2.4Ghz chopper?
If so, would all 2.4Ghz choppers be able to bind to the transmitter?
Thanks
Ian
If so, would all 2.4Ghz choppers be able to bind to the transmitter?
Thanks
Ian
#2
Senior Member
Join Date: Oct 2007
Location: FromeSomerset, UNITED KINGDOM
Posts: 830
Likes: 0
Received 0 Likes
on
0 Posts
RE: BNF Transmitter
yes, the Tx will work with the receiver - as long as it works on the same system!! very cunningly everybody have developed their own 'brand' of 2.4GHz system, e.g. Spektrum have their DSM2 and Futaba have their FASST system, both work on 2.4GHz but in slightly different ways!
there are other manufacturers also who have 2.4GHz but close inpection is required to see if they are compatible!
essentially, don't go and buy any old 2.4GHz Tx expecting it to work with any 2.4GHz Rx!
Matty )
there are other manufacturers also who have 2.4GHz but close inpection is required to see if they are compatible!
essentially, don't go and buy any old 2.4GHz Tx expecting it to work with any 2.4GHz Rx!
Matty )