The new Tornado sport jet
#2701
RE: The new Tornado sport jet
I matched the colours at Jetpower to Oracover, perfect matches.
You need the colour codes?
I have them at the office and will post hear if you need them.
Ian
You need the colour codes?
I have them at the office and will post hear if you need them.
Ian
#2702
My Feedback: (2)
Join Date: Jul 2005
Location: Riyadh, SAUDI ARABIA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
ORIGINAL: ModellbauUK
I matched the colours at Jetpower to Oracover, perfect matches.
You need the colour codes?
I have them at the office and will post hear if you need them.
Ian
I matched the colours at Jetpower to Oracover, perfect matches.
You need the colour codes?
I have them at the office and will post hear if you need them.
Ian
Azzam
#2705
My Feedback: (2)
Join Date: Jul 2005
Location: Riyadh, SAUDI ARABIA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
ORIGINAL: TUMBLER
I got the canopy on Friday. it is much heavier plastic and looks like a real high quality. I have not trained or done anything with it yet.
I got the canopy on Friday. it is much heavier plastic and looks like a real high quality. I have not trained or done anything with it yet.
Azzam
#2707
My Feedback: (13)
Join Date: Jun 2002
Location: Williamstown,
NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
by the way the canopy comes crystal clear. I need to go by some Tamiya smoke paint to tint it a bit. That stuff is the easiest way to go I have found. Just do light mist coats. I have tried the rit dye method soaking in hot water and don't really care for it.
#2712
My Feedback: (13)
Join Date: Jun 2002
Location: Williamstown,
NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
I just started trimming the cockpit tub that comes with the kit. I didnt realize that was such a poor fit as well. I didn't order one from Ray, but I guess I should have. I can make the stock one work though.
#2713
My Feedback: (5)
Join Date: Jun 2010
Location: cypress,
TX
Posts: 81
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
Yes, the stock tub and canopy are not good fits. I actually purchased two Noray V2 canopies before I knew they didn't fit the V3 well. I will purchase the V3 canopy and tub from Ray.
#2714
Member
Join Date: Jul 2008
Location: Wichita Falls,
TX
Posts: 79
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
Just a note for all wanting to order from norray.
Please use my new e-mail address. [email protected]
Thank you.
Please use my new e-mail address. [email protected]
Thank you.
#2715
RE: The new Tornado sport jet
ORIGINAL: noray1
Just a note for all wanting to order from norray.
Please use my new e-mail address. [email protected]
Thank you.
Just a note for all wanting to order from norray.
Please use my new e-mail address. [email protected]
Thank you.
you get me email ok?
Thanks
Ian
#2716
RE: The new Tornado sport jet
ORIGINAL: 2FAS
Yes, the stock tub and canopy are not good fits. I actually purchased two Noray V2 canopies before I knew they didn't fit the V3 well. I will purchase the V3 canopy and tub from Ray.
Yes, the stock tub and canopy are not good fits. I actually purchased two Noray V2 canopies before I knew they didn't fit the V3 well. I will purchase the V3 canopy and tub from Ray.
Ian
#2717
RE: The new Tornado sport jet
This is how I did it for the V1 not very nice looking however it is all hidden and works well. On my Falcon 120 I had 4 screws holding the canopy down a bit of a pain. It is an aftermarket canopy I got from the good old USA can’t remember who from. However it is very good quality and it fitted.
#2718
My Feedback: (81)
RE: The new Tornado sport jet
Wow! Changing out a aileron servo after noticing some slop I was testing things when I found a burned up elevator servo! The other servo was operating the elevator on the last flight when I brought her in just cuz she didn't feel right....
225 mg must have been binding....my bad I guess....
Lucky lucky lucky.....
225 mg must have been binding....my bad I guess....
Lucky lucky lucky.....
#2722
Senior Member
Join Date: Nov 2010
Location: Fort Wayne,
IN
Posts: 165
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
Just started putting mine together. Are HS/5245 hitec digital ok for the rudders and elevators using A123 6.6V?
Thanks,
Keith
Thanks,
Keith
#2723
My Feedback: (13)
Join Date: Jun 2002
Location: Williamstown,
NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
I have 5245's on the elevator and 225's on the rudder. I am running dual 1100 a123 packs. I have 15 flights on mine so far.
ORIGINAL: 5skyhawk172
Just started putting mine together. Are HS/5245 hitec digital ok for the rudders and elevators using A123 6.6V?
Thanks,
Keith
Just started putting mine together. Are HS/5245 hitec digital ok for the rudders and elevators using A123 6.6V?
Thanks,
Keith
#2724
My Feedback: (25)
RE: The new Tornado sport jet
5245s will work I almost went with them but Ive heard of alot of people having issues with them, I am a fan hitec servos btw. I ventured out and went with some Airtronics 94820s havent flown the new tornado yet about 80% built but so far they seem plenty strong and seem to center
perfectly, unlike my hitecs that seem to struggle with that sometimes
perfectly, unlike my hitecs that seem to struggle with that sometimes
#2725
My Feedback: (2)
Join Date: Jul 2005
Location: Riyadh, SAUDI ARABIA
Posts: 229
Likes: 0
Received 0 Likes
on
0 Posts
RE: The new Tornado sport jet
ORIGINAL: TUMBLER
I have 5245's on the elevator and 225's on the rudder. I am running dual 1100 a123 packs. I have 15 flights on mine so far.
I have 5245's on the elevator and 225's on the rudder. I am running dual 1100 a123 packs. I have 15 flights on mine so far.
ORIGINAL: 5skyhawk172
Just started putting mine together. Are HS/5245 hitec digital ok for the rudders and elevators using A123 6.6V?
Thanks,
Keith
Just started putting mine together. Are HS/5245 hitec digital ok for the rudders and elevators using A123 6.6V?
Thanks,
Keith
Azzam