ModellbauUK

I matched the colours at Jetpower to Oracover, perfect matches.

You need the colour codes?

I have them at the office and will post hear if you need them.

Ian

phantom_najd

My Feedback: (2)

Thanks Ian. I sure do. I have the yellow scheme.

Azzam

2FAS

My Feedback: (5)

Has anyone gotten the new V3 tub and canopy from Ray yet?

TUMBLER

My Feedback: (13)

I got the canopy on Friday. it is much heavier plastic and looks like a real high quality. I have not trimmer or done anything with it yet.

phantom_najd

My Feedback: (2)

Same here I got the canopy and tub... I second TUMBLER statement about the quality.

Azzam

BaldEagel

Glad to hear the NoRay canopies have not lost any of their quality since the Falcon 120 first came out.

Mike

TUMBLER

My Feedback: (13)

by the way the canopy comes crystal clear. I need to go by some Tamiya smoke paint to tint it a bit. That stuff is the easiest way to go I have found. Just do light mist coats. I have tried the rit dye method soaking in hot water and don't really care for it.

2FAS

My Feedback: (5)

Guys, those are the bigger tubs and canopies designed for V3, right?

Thanks

TUMBLER

My Feedback: (13)

Yep, you got it.

Sparhawk

Once you have the new canopies fitted, please post some closeup pics. I'll be ordering mine today.
Dan

2FAS

My Feedback: (5)

Awesome, I will order mine today also.

Thanks

TUMBLER

My Feedback: (13)

I just started trimming the cockpit tub that comes with the kit. I didnt realize that was such a poor fit as well. I didn't order one from Ray, but I guess I should have. I can make the stock one work though.

2FAS

My Feedback: (5)

Yes, the stock tub and canopy are not good fits. I actually purchased two Noray V2 canopies before I knew they didn't fit the V3 well. I will purchase the V3 canopy and tub from Ray.

noray1

Just a note for all wanting to order from norray.
Please use my new e-mail address. [email protected]
Thank you.

ModellbauUK

Hi Ray

you get me email ok?

Thanks

Ian

ModellbauUK

i agree they are not a good fit but can be made to fit if you use my frame technique. Very solid and robust when completed. The fact that the Norray canopies are less likely to split makes them a whole lot easier to work with when pulling them across the fuz canopy aperture.

Ian

r 3

This is how I did it for the V1 not very nice looking however it is all hidden and works well. On my Falcon 120 I had 4 screws holding the canopy down a bit of a pain. It is an aftermarket canopy I got from the good old USA can’t remember who from. However it is very good quality and it fitted.

Dblex

My Feedback: (81)

Wow! Changing out a aileron servo after noticing some slop I was testing things when I found a burned up elevator servo! The other servo was operating the elevator on the last flight when I brought her in just cuz she didn't feel right....


225 mg must have been binding....my bad I guess....

Lucky lucky lucky.....

joeflyer

My Feedback: (48)

Are you using a 5 cell nicad or A123 receiver battery? Hitec 225'sdon't like 6+ volts and are notorious for burning out. Use a 4 cell pack or better yet different servos. 225's don't return to center very well either.

Joe

BaldEagel

Or split the elevator and they will not fight each other.

Mike

Dblex

My Feedback: (81)

Yep, got them on 6 volts nimh packs


What can I replace them with???

5skyhawk172

Just started putting mine together. Are HS/5245 hitec digital ok for the rudders and elevators using A123 6.6V?

Thanks,

Keith

TUMBLER

My Feedback: (13)

I have 5245's on the elevator and 225's on the rudder. I am running dual 1100 a123 packs. I have 15 flights on mine so far.

Dieselman1220

My Feedback: (25)

5245s will work I almost went with them but Ive heard of alot of people having issues with them, I am a fan hitec servos btw. I ventured out and went with some Airtronics 94820s havent flown the new tornado yet about 80% built but so far they seem plenty strong and seem to center
perfectly, unlike my hitecs that seem to struggle with that sometimes

phantom_najd

My Feedback: (2)

I had Hitec HS-5245MG on the rudders and elevator with LiFe batteries in my V1 tornado that I sold last week and had well over 70 flights with no issues at all. One thing I must clarify, I programmed the elevator servos so that the don't bind at all through out the entire travel.

Azzam