The Aermacchi MB339 is here agian
#477
Junior Member
Join Date: Jan 2012
Location: RomaRoma, ITALY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Aermacchi MB339 is here agian
Ciao ragazzi scusate la mia intromissione,se ho visto e letto bene la discussione è basata su Aermacchi 339 Graupner.
Vorrei rendervi partecipi del lavoro da me svolto
Vorrei rendervi partecipi del lavoro da me svolto
#478
Junior Member
Join Date: Jan 2012
Location: RomaRoma, ITALY
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Aermacchi MB339 is here agian
Video Aermacchi 339 Graupner volo di collaudo http://www.youtube.com/watch?v=NRZsl...1&feature=plcp
#482
RE: The Aermacchi MB339 is here agian
Using Lipos would be a plus... In the elevator make sure you use high quality digital mini servos. Just make sure you get the correct CG and dont go over 24lbs and you should be ok. I still recommend a P80.
Best of luck!
Best of luck!
#492
My Feedback: (1)
RE: The Aermacchi MB339 is here agian
Finally did the maiden today, P70 for power, came in at 21.5lbs. flew very well landing was very predictable. might need a little up elevator with full flaps, pitched down slightly.
the only thing noticable was some dutch roll, I do not have the fins on the rear , I will put them on for the next flight and hopefully that will correct it.
I have always said this was a nice jet and figured it wouild fly great, some quality issues on the factory assembly (gluing) and the instructions suck..everyone who has one knows that.
I believe that Modellbau has suspended the production, if they fix the little things that people have discussed on the forum and make it a bit more of an ARF they will have a winner...thay already do have one, it was just a little frustrating to build and fix some of the difficiencies. Everyone at the field today loved it
Looking forward to the next time out with it.
Angus
the only thing noticable was some dutch roll, I do not have the fins on the rear , I will put them on for the next flight and hopefully that will correct it.
I have always said this was a nice jet and figured it wouild fly great, some quality issues on the factory assembly (gluing) and the instructions suck..everyone who has one knows that.
I believe that Modellbau has suspended the production, if they fix the little things that people have discussed on the forum and make it a bit more of an ARF they will have a winner...thay already do have one, it was just a little frustrating to build and fix some of the difficiencies. Everyone at the field today loved it
Looking forward to the next time out with it.
Angus
#493
RE: The Aermacchi MB339 is here agian
Nice! I have 5 flights on mine, but my local field is a little small for this jet so im holding off on flying it till i could get to the other field which is about 2.5 hours away drive. I love the way it flies.
#495
RE: The Aermacchi MB339 is here agian
Hey guys just want to post this video of Oscar from Brazil flying his MB339, for those who doubt the airframe, in this video from about the 4 min mark you can see the airplane flown fast and pulling some Gs.
enjoy!
This video is not mines! I'm posting it with the Permission of Oscar the owner. if you look on his you-tube channel you can see more videos of the same airplane
Thanks!
http://www.youtube.com/watch?v=6M8FFFuqVaA
enjoy!
This video is not mines! I'm posting it with the Permission of Oscar the owner. if you look on his you-tube channel you can see more videos of the same airplane
Thanks!
http://www.youtube.com/watch?v=6M8FFFuqVaA
#496
Member
Join Date: Apr 2011
Location: Bogota, COLOMBIA
Posts: 72
Likes: 0
Received 0 Likes
on
0 Posts
RE: The Aermacchi MB339 is here agian
It's a matter of time before that airplane crashes!!! The Stabilzers are mounted upside down.. Those red and white stripes on the elevator go on the bottom which makes that live hinge gap on the top instead of the bottome. Plane flies nice but was built wrong.
#497
RE: The Aermacchi MB339 is here agian
Yup he's right, I got caught in that same trap, only the Italians would put the decoration on the bottom of the tail. LOL
Mike
Mike
#498
RE: The Aermacchi MB339 is here agian
Can anyone tell me dimensions on where the gear mounts are in the wing? They are not factory cut so I'm looking for some measurements..
Thanks
Thanks
#499
RE: The Aermacchi MB339 is here agian
I have one Tricolor scheme BNIB with retracts if anyone is interested. Kept to build myself but never got around to it with the commitment I've needed to put into the Aurora.
Ian
Ian