Skymasters DG-600T
#1
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
Skymasters DG-600T
Is there anyone who has built the Skymasters DG-600T?
Does anyone have some experience (flight characteristics) with the glider,and I am interested of the CG position and how others have solved the servo installations in the wing.
Lasse P
Does anyone have some experience (flight characteristics) with the glider,and I am interested of the CG position and how others have solved the servo installations in the wing.
Lasse P
#2
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
Okay!
I understand!
Nobody is interested in a "small" jet glider!
But!
I'm almost ready for the maiden with my glider.
I did a lot of changes on "my" model, since there was no manual in the kit!
Of course, there will be a film on my DG-600T maiden!
Here is some build pictures!
Lasse P
I understand!
Nobody is interested in a "small" jet glider!
But!
I'm almost ready for the maiden with my glider.
I did a lot of changes on "my" model, since there was no manual in the kit!
Of course, there will be a film on my DG-600T maiden!
Here is some build pictures!
Lasse P
#3
Senior Member
Join Date: Jan 2006
Location: bishop Auckland, UNITED KINGDOM
Posts: 236
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
Lasse,
Hello iam always intrested in a turbine glider after watching Ali flying one a few years ago, i have a baudis Salto on its way for a p60.I looked at the Skymaster model but thought it overpriced compared to Baudis, HF Modellell etc, these are all well known and respected model glider makers and fly very well.I have stuck several turbines on gliders as they suit my style of flying and more important my flying site plus we have too many F16s F15s Boomers locally.
Please keep us informed on your DG,
cheers Euan.
Hello iam always intrested in a turbine glider after watching Ali flying one a few years ago, i have a baudis Salto on its way for a p60.I looked at the Skymaster model but thought it overpriced compared to Baudis, HF Modellell etc, these are all well known and respected model glider makers and fly very well.I have stuck several turbines on gliders as they suit my style of flying and more important my flying site plus we have too many F16s F15s Boomers locally.
Please keep us informed on your DG,
cheers Euan.
#4
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
ORIGINAL: Euan
Lasse,
Hello iam always intrested in a turbine glider after watching Ali flying one a few years ago, i have a baudis Salto on its way for a p60.I looked at the Skymaster model but thought it overpriced compared to Baudis, HF Modellell etc, these are all well known and respected model glider makers and fly very well.I have stuck several turbines on gliders as they suit my style of flying and more important my flying site plus we have too many F16s F15s Boomers locally.
Please keep us informed on your DG,
cheers Euan.
Lasse,
Hello iam always intrested in a turbine glider after watching Ali flying one a few years ago, i have a baudis Salto on its way for a p60.I looked at the Skymaster model but thought it overpriced compared to Baudis, HF Modellell etc, these are all well known and respected model glider makers and fly very well.I have stuck several turbines on gliders as they suit my style of flying and more important my flying site plus we have too many F16s F15s Boomers locally.
Please keep us informed on your DG,
cheers Euan.
More info come when I've been flying the "small" glider!
Lasse P
#6
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
ORIGINAL: Jetkopter
Lasse,
What changes did you make to the glider?
Lasse,
What changes did you make to the glider?
I don't know, I got some pictures from John (SM), so I tried to do something that looked like the pictures!
Lasse P
#7
My Feedback: (3)
Join Date: Oct 2005
Location: san jose,
CA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
Lasse, I made a Rosenthal DG600 years ago. Flew really nice. This one looks great and would estimate the CG to be right on front edge of the joiner. Which is a pretty standard location.
#8
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
ORIGINAL: dbsonic
This one looks great and would estimate the CG to be right on front edge of the joiner. Which is a pretty standard location.
This one looks great and would estimate the CG to be right on front edge of the joiner. Which is a pretty standard location.
I understand that!
Just thought I'd ask someone Skymaster (Turbine DG-600) owner for the precise CG location for the best performence, because i think it will be so much unnecessary lead weights in the nose.
Regards
Lasse P
#10
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
ORIGINAL: Jetkopter
Lasse, what servos did you use for the wings?
Lasse, what servos did you use for the wings?
I missed your PM!
I use HS-5245 MG to the flaps and HS-125 MG to the aileron.
Lasse P
#13
My Feedback: (3)
Join Date: Oct 2005
Location: san jose,
CA
Posts: 880
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
Lasse, typical scale sailplane has a fair chunk of lead or ball bearings mixed in epoxy right up there in the nose. Only on weak days are sailplane guys concerned about any additional ballast : )
May want to try rcgroups scale sailplane forum to find a SM DG600 owner.
Anyways, good luck
May want to try rcgroups scale sailplane forum to find a SM DG600 owner.
Anyways, good luck
#14
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
I maidened my DG-600 last month
The first flight was really great, the glider is really easie to fly.
In the current situation, I have flown 40 times. Other, I love this concept with glider and the P-20SX
http://www.viddler.com/v/75fdb51c
Guys, I have a new film i will post soon, now that I know how much the model is capable of.
/Lasse P
The first flight was really great, the glider is really easie to fly.
In the current situation, I have flown 40 times. Other, I love this concept with glider and the P-20SX
http://www.viddler.com/v/75fdb51c
Guys, I have a new film i will post soon, now that I know how much the model is capable of.
/Lasse P
#16
RE: Skymasters DG-600T
ORIGINAL: nir schweizer
Hello, did you put two servo's for each flap ?
And one for the Ail?
Thanks Nir
www.nirlybuilt.com
Hello, did you put two servo's for each flap ?
And one for the Ail?
Thanks Nir
www.nirlybuilt.com
yes, two servo's for each flap and two servo's for each Aileron
#18
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
ORIGINAL: nir schweizer
Hello, did you put two servo's for each flap ?
And one for the Ail?
Thanks Nir
www.nirlybuilt.com
Hello, did you put two servo's for each flap ?
And one for the Ail?
Thanks Nir
www.nirlybuilt.com
I have not been on the forum for a while, but you got the answer from Anton.
In addition, I have sent a mail to you.
/Lasse P
#22
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
The concept with P-20SX is great, and the glider is really simple to handle.[8D]
http://www.viddler.com/v/898ca15f
Lasse P
http://www.viddler.com/v/898ca15f
Lasse P
#24
Thread Starter
Join Date: Dec 2003
Location: Stockholm, SWEDEN
Posts: 602
Likes: 0
Received 0 Likes
on
0 Posts
RE: Skymasters DG-600T
Here is a film when I really enjoying the "glider"
In addition, a movie when a Swedish jet rookie get to know the glider.
http://www.viddler.com/v/eaf1b83
http://www.viddler.com/v/53a56dc7
Lasse P
In addition, a movie when a Swedish jet rookie get to know the glider.
http://www.viddler.com/v/eaf1b83
http://www.viddler.com/v/53a56dc7
Lasse P