alis902

Hi

The mounting angle of the image you need to attach?
Described such anywhere in the manual is not.

Meesh

My Feedback: (135)

No Angle. Must be on the pipe centerline.

scottkieper

My Feedback: (10)

if you are building an a10 no angle is needed just mix throttle with elevator ..

rcpete347

My Feedback: (251)

HI all, on a jet with no pipe, the angle of the turbine is changed, if their is a change in attitude at full throttle. Example is a rise in attitude at full throttle, the turbine is slanted down, just enough to maintain level flight, ( kingcat for example)
A-10 nozzle in last pic.
Hope that helps
Rcpete

grbaker

My Feedback: (29)

Plus your turbine is too far back. Look in your Jetcat manual for turbine to pipe spacing.