deep detailed BVM F4-Phantom
#1
Member
Thread Starter
Join Date: Apr 2012
Location: Niedergesteln, SWITZERLAND
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
deep detailed BVM F4-Phantom
Upgrade Scale J-79 axial-flow turbojet dummy for my twenty year old twinturbine BVM F-4 Phantom :-)
Rainer Willisch, Switzerland
Rainer Willisch, Switzerland
#3
Member
Thread Starter
Join Date: Apr 2012
Location: Niedergesteln, SWITZERLAND
Posts: 99
Likes: 0
Received 0 Likes
on
0 Posts
for turbine dummy is for turbine operating. The rotor is ball bearing mounted and free rotating.
59 Grams / 0.13007 Pounds is ok for twenty rotrorblade, twenty stators, 8 struts, two ball bearings and the steath (120mm / 4.7 inches diameter)
59 Grams / 0.13007 Pounds is ok for twenty rotrorblade, twenty stators, 8 struts, two ball bearings and the steath (120mm / 4.7 inches diameter)