EASY JET
#1
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
EASY JET
Dear friends
Developing the plans of Fox Cub, born the EASY JET....
With new wing and turbine coater.... "The Easy Jet trainer may not be the most beautiful or sleek of jet designs, but that was never the intention. Designed and produced from the offset to be a simple and rugged model that is so stable and easy to fly, that any RC pilot can experience the joy and pleasure of flying a RC turbine model, regardless of their flying skills."
This models was present in PAM 2012 - PORTUGUESE AIR MEETING
3 colour squemes: red/blue/green.
"We understand that the styling may not be to everyone's liking, but here our goal is to get as many people flying jets as possible, and we understand that some may be put off or intimidated by the complex nature of some of the so called jet trainers on the market today. Hopefully the easy jet will offer an alternative to those wanting something that bit easier!
Ideally suited to the smaller turbines such as the Jet cat P-60, Wren 54 etc, or even those home built turbines that maybe do not produce enough power to fly the bigger heavier jet aircraft that seem so common place in today's market. No need for exotic or expensive servos. Small control surfaces, short positive control linkages and relative low top speeds mean that almost any standard size servo is useable (depending on turbine fitted)."
Portugal/Spain/England distributors confirmed.... looking for more :-)
Great landings
João Matos
Developing the plans of Fox Cub, born the EASY JET....
With new wing and turbine coater.... "The Easy Jet trainer may not be the most beautiful or sleek of jet designs, but that was never the intention. Designed and produced from the offset to be a simple and rugged model that is so stable and easy to fly, that any RC pilot can experience the joy and pleasure of flying a RC turbine model, regardless of their flying skills."
This models was present in PAM 2012 - PORTUGUESE AIR MEETING
3 colour squemes: red/blue/green.
"We understand that the styling may not be to everyone's liking, but here our goal is to get as many people flying jets as possible, and we understand that some may be put off or intimidated by the complex nature of some of the so called jet trainers on the market today. Hopefully the easy jet will offer an alternative to those wanting something that bit easier!
Ideally suited to the smaller turbines such as the Jet cat P-60, Wren 54 etc, or even those home built turbines that maybe do not produce enough power to fly the bigger heavier jet aircraft that seem so common place in today's market. No need for exotic or expensive servos. Small control surfaces, short positive control linkages and relative low top speeds mean that almost any standard size servo is useable (depending on turbine fitted)."
Portugal/Spain/England distributors confirmed.... looking for more :-)
Great landings
João Matos
#2
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Spec.
Length: 67" (1700mm)
Servos Required: 8
Speed Range: 50-225kmh
Turbine or Fan Required: 12-14lb/5-6.5kg thrust ( EDF 120mm)
Weight: 13lb/6kg
Wingspan: 64" (1630mm)
BR
João Matos
Some pictures:
Length: 67" (1700mm)
Servos Required: 8
Speed Range: 50-225kmh
Turbine or Fan Required: 12-14lb/5-6.5kg thrust ( EDF 120mm)
Weight: 13lb/6kg
Wingspan: 64" (1630mm)
BR
João Matos
Some pictures:
#6
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Hi Dr. Honda.
I am looking for a big USA distributor for this jet and new projects :-)
Price is 750 USD or 600 EUROS.
Kit ARF in 3 colour squemes ( red/blue/green), with carbon wing tube, great acessories including 2L tank....
Thanks
BR
João Matos
I am looking for a big USA distributor for this jet and new projects :-)
Price is 750 USD or 600 EUROS.
Kit ARF in 3 colour squemes ( red/blue/green), with carbon wing tube, great acessories including 2L tank....
Thanks
BR
João Matos
#7
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Hi my friends.
Now in develop new EASY JET low wings - JETMASTER :-)
Thanks for your suport.
BR
João Matos
www.joaomatosrc.com
Now in develop new EASY JET low wings - JETMASTER :-)
Thanks for your suport.
BR
João Matos
www.joaomatosrc.com
#8
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Thanks to good work of my friend Carlos Marques we can see a good picture manual in:
https://plus.google.com/photos/10856...97044306310033
Thanks for your suport.
BR
João Matos
www.joaomatosrc.com
https://plus.google.com/photos/10856...97044306310033
Thanks for your suport.
BR
João Matos
www.joaomatosrc.com
#9
RE: EASY JET
What is the wing area?
When will the low wing version be ready for delivery?
Hope it's fixed landing gear on it too.
Price on Models and transport to Norway?
Merlin VT80 will it fit?
Regards
Sejenssen
When will the low wing version be ready for delivery?
Hope it's fixed landing gear on it too.
Price on Models and transport to Norway?
Merlin VT80 will it fit?
Regards
Sejenssen
#10
RE: EASY JET
Hi friends:
My Easy Jet made the maiden this week and was really perfect. The Puma Jet 60 has power enought for this model that is only 6kg empty.
I not have photos. But I hope go fly again the next week and I will take photos and I hope video.
Regards from Spain.
Carlos Márquez.
_______________________________
www.cmjets.blogspot.com
My Easy Jet made the maiden this week and was really perfect. The Puma Jet 60 has power enought for this model that is only 6kg empty.
I not have photos. But I hope go fly again the next week and I will take photos and I hope video.
Regards from Spain.
Carlos Márquez.
_______________________________
www.cmjets.blogspot.com
#12
RE: EASY JET
Hi Marcelo:
Yes, no problem, the next week I will fly again and I will make photos and video and I will tell you the comand's trows.
Regards from Spain.
Carlos.
________________________________
www.cmjets.blogspot.com
Yes, no problem, the next week I will fly again and I will make photos and video and I will tell you the comand's trows.
Regards from Spain.
Carlos.
________________________________
www.cmjets.blogspot.com
#14
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Dear friends.
I am glad to see you Carlos ... Congratulations for your flight!
Marcelo hope you receive the tank soon
;-)
Thanks for your suport....
Joao Matos
www.joaomatosrc.com
I am glad to see you Carlos ... Congratulations for your flight!
Marcelo hope you receive the tank soon
;-)
Thanks for your suport....
Joao Matos
www.joaomatosrc.com
#15
My Feedback: (3)
RE: EASY JET
Hello Joao,
Today I finally did maiden my Easy Jet Trainer.
The maiden was great, the plane is a very good flyer, looks very nice in the air and kept the attention of many people at our flying field.
My EJT is powered by a Puma Jet 60 and it is a great turbine. I am very happy with my three fligts today. Sorry but there is no videos but I will rolling a video soon.
I am posting some pictures.
Thak you Joao for this great plane. It is my first jet and it is a very good choice for whom wants enter in the jets in an afordable way.
Today I finally did maiden my Easy Jet Trainer.
The maiden was great, the plane is a very good flyer, looks very nice in the air and kept the attention of many people at our flying field.
My EJT is powered by a Puma Jet 60 and it is a great turbine. I am very happy with my three fligts today. Sorry but there is no videos but I will rolling a video soon.
I am posting some pictures.
Thak you Joao for this great plane. It is my first jet and it is a very good choice for whom wants enter in the jets in an afordable way.
#16
Senior Member
Join Date: May 2009
Location: Dorset, , UNITED KINGDOM
Posts: 186
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Hi João
You have designed a really pretty jet trainer there! Well done! It certainly beats the Boomerang series in the looks stakes, as it looks like a 'proper' jet. Good luck with your other projects too!
Cheers
Pat
You have designed a really pretty jet trainer there! Well done! It certainly beats the Boomerang series in the looks stakes, as it looks like a 'proper' jet. Good luck with your other projects too!
Cheers
Pat
#17
RE: EASY JET
Olá Marcelo:
Congrats for the maiden, I hope fly mine again this week, but the bad weather not let me now, it is hard windy.
Really this trainer is very cool, like said the name, easy to fly and easy to landing.
Regards from Spain.
Carlos Márquez.
____________________________________
www.cmjets.blogspot.com
Congrats for the maiden, I hope fly mine again this week, but the bad weather not let me now, it is hard windy.
Really this trainer is very cool, like said the name, easy to fly and easy to landing.
Regards from Spain.
Carlos Márquez.
____________________________________
www.cmjets.blogspot.com
#18
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Hi Marcelo.
Congratulations for your sucess. Great job my friend :-)
I am glad to see that's easy to fly the Easy Jet Trainer :-) ;-)
Thanks for your suport
Joao Matos
www.joaomatosrc.com
Congratulations for your sucess. Great job my friend :-)
I am glad to see that's easy to fly the Easy Jet Trainer :-) ;-)
Thanks for your suport
Joao Matos
www.joaomatosrc.com
#21
My Feedback: (3)
RE: EASY JET
Joao,
Next Thursday I will be driving to the FESBRAER in Gaspar SC Brazil. www.fesbraer.com
I will show the plane there and hope to get a great video for posting. I will let you know the people feedback up to nex monday.
Just to let you know the four EXM Mini is almost cleared from customs.
Take care
Marcelo
Next Thursday I will be driving to the FESBRAER in Gaspar SC Brazil. www.fesbraer.com
I will show the plane there and hope to get a great video for posting. I will let you know the people feedback up to nex monday.
Just to let you know the four EXM Mini is almost cleared from customs.
Take care
Marcelo
#22
RE: EASY JET
Just to let you know the four EXM Mini is almost cleared from customs.
#23
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Hi Darren.
I am suprise when you talk about "your model" :-) My friend, i will not sponsor you and i have my pilots for tests and reviews :-) :-)
Thanks again for your suport. But you are a regular costumer as Marcelo and Carlos.
If you want one EXM MINI i am glad to sell you one.
I am very happy to know that you are very interest in my topics and you should know GREEN DEVIL colour squeme :-) If not... enjoy it :-)
Thanks for your suport.
João Matos
www.joaomatosrc.com
I am suprise when you talk about "your model" :-) My friend, i will not sponsor you and i have my pilots for tests and reviews :-) :-)
Thanks again for your suport. But you are a regular costumer as Marcelo and Carlos.
If you want one EXM MINI i am glad to sell you one.
I am very happy to know that you are very interest in my topics and you should know GREEN DEVIL colour squeme :-) If not... enjoy it :-)
Thanks for your suport.
João Matos
www.joaomatosrc.com
#24
RE: EASY JET
I am suprise when you talk about "your model" :-)
i will not sponsor you and i have my pilots for tests and reviews
Thanks again for your suport. But you are a regular costumer as Marcelo
This thread therefore makes interesting reading: http://www.rcuniverse.com/forum/m_38...tm.htm#3810047
HELLO GUYS,
WE JUST STARTED MANUFACTURING A BRAND NEW ENGINE CALLED TORCH ENGINES.
LET ME KNOW WHAT IS YOUR IMPRESSION.
REGARDS,
MARCELO
WE JUST STARTED MANUFACTURING A BRAND NEW ENGINE CALLED TORCH ENGINES.
LET ME KNOW WHAT IS YOUR IMPRESSION.
REGARDS,
MARCELO
ORIGINAL: Marcelo Assis
Hi Tumbler,
Joaoa matos is in China working on the planes with the manufacturer.
He will be back on Monday I think.
Take
Marcelo
JM RC Dealer in Brazil
Hi Tumbler,
Joaoa matos is in China working on the planes with the manufacturer.
He will be back on Monday I think.
Take
Marcelo
JM RC Dealer in Brazil
#25
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EASY JET
Hi Darren.
Thanks again for your suport.
MARCELO ASSIS is my distributor ( TORCHE ENGINES) , my costumer and my friend :-) I do not sponsor MARCELO :-) :-)
All my cotumers are my friends and i try to suport them.
You cancel your EXM MINI order. But in future if you still want to make orders of my products you are welcome my friend.
Stay attention to my topics.
BR
João Matos
www.joaomatosrc.com
Thanks again for your suport.
MARCELO ASSIS is my distributor ( TORCHE ENGINES) , my costumer and my friend :-) I do not sponsor MARCELO :-) :-)
All my cotumers are my friends and i try to suport them.
You cancel your EXM MINI order. But in future if you still want to make orders of my products you are welcome my friend.
Stay attention to my topics.
BR
João Matos
www.joaomatosrc.com