mibo A-10 build Question
#1
Member
Thread Starter
Join Date: Feb 2004
Location: Nisinomiyasinon, JAPAN
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
mibo A-10 build Question
Hi
Is this portion a part used freely in person?
Probably, that will be right since there is also no part.
Please show me an own device.
#2
My Feedback: (61)
Join Date: Sep 2002
Location: spring,
TX
Posts: 494
Likes: 0
Received 0 Likes
on
0 Posts
RE: mibo A-10 build Question
there is no part thet fits there that i know of.
i used it to make radio trays for each side. there are matching slots in the next forward bulkhead for this as well.
i used it to make radio trays for each side. there are matching slots in the next forward bulkhead for this as well.
#4
Member
Thread Starter
Join Date: Feb 2004
Location: Nisinomiyasinon, JAPAN
Posts: 58
Likes: 0
Received 0 Likes
on
0 Posts
RE: mibo A-10 build Question
Hi
Manufacture in turbine
1) pic-1 and pic-2 which mount is right?
2) The part of pic-3
Adhesion is fixed to an arrow portion only by adhesion material?