ballcock options??
#1
Thread Starter
ballcock options??
Hi All,
I have a Habu 32 with P20 conversion. The fuel system is running 3mm festo and I would like to install a ballcock valve in between the fuel pump and tank - to isolate the pump when fueling the tank. It seems though that the smallest Festo ball cock is 4mm.
Does anyone know if a 3mm ballcock is available? another option would be to install a 3 to 4mm step connector on either side of the valve, or maybe change the tank to pump line to 4mm?
Appreciate opinions on this.
cheers
I have a Habu 32 with P20 conversion. The fuel system is running 3mm festo and I would like to install a ballcock valve in between the fuel pump and tank - to isolate the pump when fueling the tank. It seems though that the smallest Festo ball cock is 4mm.
Does anyone know if a 3mm ballcock is available? another option would be to install a 3 to 4mm step connector on either side of the valve, or maybe change the tank to pump line to 4mm?
Appreciate opinions on this.
cheers
#3
Banned
Join Date: Apr 2012
Location: , , UNITED KINGDOM
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
RE: ballcock options??
That all creates quite a big installation in a small airframe. Why just not use a pipe clamping device on the tygon. Very cheap, light and works well. I use them in all my planes
#5
Banned
Join Date: Apr 2012
Location: , , UNITED KINGDOM
Posts: 346
Likes: 0
Received 0 Likes
on
0 Posts
RE: ballcock options??
ORIGINAL: indubitably
Where might they come from?
Where might they come from?
http://www.hobbyking.com/hobbyking/s...dProduct=12235