ORIGINAL: Gordon W
Why are you guys switching off your DX18s to access the system menu? See if this helps:
With the Tx already on the model you’re dealing with, press CLEAR and BACK together to get the model select screen.
Scroll to the adjacent memory, then press the roller and select this memory. You’re now on the system setup screen, the TX stops transmitting, and RX goes into failsafe.
Scroll down to model select and re-select the model you were on originally.
You’re now back on the system setup screen for the model you want to adjust with the Tx transmission still inhibited.
When you’ve done the adjustments, press BACK to activate the model memory, and reinstate the Tx-Rx RF link.
It’s a minor faff, but if this isn’t better than switching the Tx off and on, what am I missing?