The Aurora Project Announced
#528
Thread Starter
#530
Senior Member
Join Date: Jun 2003
Location: london, UNITED KINGDOM
Posts: 705
Likes: 0
Received 0 Likes
on
0 Posts
you will enjoy the extra authority the gyro applies to the aurora, ive been playing with an igyro , just waiting for a software patch to open up the heading hold value a bit more, come on PB !
#531
My Feedback: (21)
Join Date: Dec 2009
Location: wellington,
FL
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Sorry to get this out so late, but had a great maiden! Awesome flying jet. Thanks Elite Aerosports and support staff for the help. Also Thanks to smitty and modellbuauk for the numbers provided
#533
Back from work last week and now caught up on the non plane stuff so I started the Aurora last night.
So far I've enlarged the rear exit hole for the pipe which will be fixed with high temp black silicon.
Painted the interior with primer then a coat of matt black.
Marvelled at the size and craftsmanship of the P180 RXI, then scratched my head as to why there isn't a GSU in the box.
More head scratching on the tank and why they didn't make it longer to fit over the top of the tray emboss.
Built the oleos.
What FOD screen are people using for the P-140/180 (same dia)?
So far I've enlarged the rear exit hole for the pipe which will be fixed with high temp black silicon.
Painted the interior with primer then a coat of matt black.
Marvelled at the size and craftsmanship of the P180 RXI, then scratched my head as to why there isn't a GSU in the box.
More head scratching on the tank and why they didn't make it longer to fit over the top of the tray emboss.
Built the oleos.
What FOD screen are people using for the P-140/180 (same dia)?
#534
Senior Member
My Feedback: (7)
Join Date: Aug 2004
Location: APO, AE
Posts: 144
Likes: 0
Received 0 Likes
on
0 Posts
Back from work last week and now caught up on the non plane stuff so I started the Aurora last night.
So far I've enlarged the rear exit hole for the pipe which will be fixed with high temp black silicon.
Painted the interior with primer then a coat of matt black.
Marvelled at the size and craftsmanship of the P180 RXI, then scratched my head as to why there isn't a GSU in the box.
More head scratching on the tank and why they didn't make it longer to fit over the top of the tray emboss.
Built the oleos.
What FOD screen are people using for the P-140/180 (same dia)?
So far I've enlarged the rear exit hole for the pipe which will be fixed with high temp black silicon.
Painted the interior with primer then a coat of matt black.
Marvelled at the size and craftsmanship of the P180 RXI, then scratched my head as to why there isn't a GSU in the box.
More head scratching on the tank and why they didn't make it longer to fit over the top of the tray emboss.
Built the oleos.
What FOD screen are people using for the P-140/180 (same dia)?
Good afternoon Colin,
To help you with the head scratching.. At the factory we make a custom tank that fits in the tray emboss.
Your tank is from a different supplier..
Most people just invert the tank tray so the tank will fit flat..
Enjoy.. I was just notified that the Aurora won best sport jet performance at the Jets over Kentucky Airshow in the US.
So feel free to wring her out..
#535
Join Date: Feb 2012
Location: london, UNITED KINGDOM
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Hi Collin,
the easiest way to overcome this problem is to cut out a groove where the tank sits at the back of the tray
If you need any further help please do not hesitate to give me a call.
Saleem
Flight Composite Tech (FCT)
the easiest way to overcome this problem is to cut out a groove where the tank sits at the back of the tray
If you need any further help please do not hesitate to give me a call.
Saleem
Flight Composite Tech (FCT)
#539
So life got in the way but finally pulling the finger out to finish the Aurora. Just the ailerons to do (waiting on better servo arms), details4scale lighting system to install (when it arrives) then a final balance.
Tomorrow the turbine is going to be ran for the first time, very excited.
Tomorrow the turbine is going to be ran for the first time, very excited.
#542
First spool up of the p180rxi, bags of power!
Just the lighting system to go in which should be here this week
http://www.youtube.com/watch?v=d-21rquhPzE
Just the lighting system to go in which should be here this week
http://www.youtube.com/watch?v=d-21rquhPzE
Last edited by Colin_Mc; 04-12-2015 at 04:28 PM.
#544
My Feedback: (16)
Clear canopy
I live in the USA Florida, you have any clear canopyn cockpit, my email is [email protected]
Aurora jet
Aurora jet