j.c.a.

My Feedback: (2)

My maiden video for the tomahawk is on you tube jcth082614

claudius

Hello guys, I am working on the dive brake.
I am wondering what the parts for? they were in a pack together with the divebrake's hardwares.

DUCMOZ

Hi Jeff

Where do you have your smoke tank installed?

Thanks, Behzad

jws_aces

My Feedback: (33)

I mounted on top of the stock tank.
You can see I am using extra Velcro straps to hold in. It is a 64oz tank.

DUCMOZ

Thanks Jeff. I will have to look for space for mine. I didn't plan to put it there and it is too late to modify.

Thanks again.

behzad

jws_aces

My Feedback: (33)

Keep in mind that even where mine is and no nose added weight mine is very slightly nose heavy so make sure you keep it behind the nose mount.

Blancr

Hi Lavi,

Would it be possible for you to post a picture of your completed wing light cover in position. I'm not keen on just screwing the supplied (poor quality) cover onto the wing tip. I think it needs to be recessed in some and I'm just wondering if this is what you ended up doing?

Thanks for any help

Bob

lavi rider

My Feedback: (6)

Hey Bob ,
No problem send me you email and I'll throw in a bunch of pictures.

The two fiberglass rails in question before are scale parts that go on each side of the dive brake .

Blancr

Thanks Lavi - that's brilliant. Pm sent

Bob

lavi rider

My Feedback: (6)

Well, here they are after all...

DUCMOZ

Hi Jeff, Thank you. It is amazing how much room the cockpit takes and how little room is left to work with for the install. I have not installed a Smoke tank yet and getting close to have to balance. Will see where batteries go and take it from there.

Behzad

jws_aces

My Feedback: (33)

I started with flight pack batteries under the pilot beside of the nose gear. I have moved them to behind the main gear doors. I am using Zippy's 4100 MAH 2s life. They weight 287 grams each.

I use a 2100 3s life the turbine and have it located just behind the front pilot on the board that I have all the radio gear on. I would like to move it back but I can find the room. I am using a Skymaster pilot figure and he is heavy. I didn't weight him but I don't want to use 2 pilots becuase I don't need the extra nose weight.

The factory balance numbers are good but i feel like are a bit on the nose heavy side. Mine will not hold the nose up on the wheels very long at all. I know that when it is balances right you can ride a wheelie.

DUCMOZ

Thanks Jeff. I bought a pilot from I Fly Tallies and is only 6.5Oz including the helmet. I will be also using one. Batteries are Duralite + a lipo + a 4 cell for the lights. I think around the center section will be the right area for them. But, will report.

Behzad

lavi rider

My Feedback: (6)

Wheel bays ....

lavi rider

My Feedback: (6)

More ...

lavi rider

My Feedback: (6)

Canopy ..

lavi rider

My Feedback: (6)

More..

lavi rider

My Feedback: (6)

Locking mechanism

lavi rider

My Feedback: (6)

Eyelets...

lavi rider

My Feedback: (6)

Trigger ..

DUCMOZ

Looks good Lavi.

Behzad

lavi rider

My Feedback: (6)

Thx ,

lavi rider

My Feedback: (6)

Wing to fuselage air connectors..

lavi rider

My Feedback: (6)

More...

Hinckley Bill

My Feedback: (569)

Would you mind sharing where you got the wing to fuselage air connectors....they look fantastic!

Thx,

Bill