CARF Skygate Hawk in the house !
#932
For those of us who don't have an UL to reference would it be possible to supply some measurements. Even if you can measure just the opening from the edge of the duct to the edge of the restrictor. .
Sorry I have not read the entire thread in detail, I am installing a K180, but might go for a K210 in future..
Thank you
Sorry I have not read the entire thread in detail, I am installing a K180, but might go for a K210 in future..
Thank you
#936
Hi guys, it is getting close. Install is done and now I have to program (if I remember how to reverse the servos on power box!!) . Here are pictures of lower tray and the control panel.
Behzad
Behzad
#939
Hi Jeff
since you have the most flights on your hawk, could you please give me the flap deflection measurement by inches or MM. The manual shows as degree which is never that accurate to measure.
thanks
behzad
since you have the most flights on your hawk, could you please give me the flap deflection measurement by inches or MM. The manual shows as degree which is never that accurate to measure.
thanks
behzad
#947