EXM MINI
#151
RE: EXM MINI
Hi Darren i would like to invite you to come to PAM 2013 and see it flying :-) ;-)
The reason for my constant posts on your threads is that I am very disappointed that I have been pushed to a point where I felt the need to cancel my order for a model that does, from the photos at least, look very good. However I'm wary of dealing with a company/person that ignores my simple questions and doesn't give me confidence that my money is being spent wisely.
I believe I have more than made my point now. I will back away and leave your threads to continue without my constant criticism. I hope that those that still have models on order will receive them soon and will have great fun with them.
#152
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Hi all.
I am trying to choose the best choices for my planes.
This EXM MINI is an world made plane:
EXM MINI design & develope in PORTUGAL and made in CHINA
RECTRACTS made in SPAIN
TANK made in SPAIN
TAILPIPE made in GERMANY
TEST in PORTUGAL by myself and in SPAIN by RAUL LOZANO
Thanks to all that help me in this develope :-)
João Matos
www.joaomatosrc.com
I am trying to choose the best choices for my planes.
This EXM MINI is an world made plane:
EXM MINI design & develope in PORTUGAL and made in CHINA
RECTRACTS made in SPAIN
TANK made in SPAIN
TAILPIPE made in GERMANY
TEST in PORTUGAL by myself and in SPAIN by RAUL LOZANO
Thanks to all that help me in this develope :-)
João Matos
www.joaomatosrc.com
#153
Join Date: Apr 2013
Location: holland, NETHERLANDS
Posts: 474
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Beutiful plane and beutiful pictures!!
But Where and When can we get one???????? (including all the parts mentioned.................)
Does not make any sense to post if its not available...........
But Where and When can we get one???????? (including all the parts mentioned.................)
Does not make any sense to post if its not available...........
#154
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Hi.
Some colour squemes still available direct form China warehouse.
From Portugal, next week i will receive more... and some not reserved :-)
I send you an message.
Thanks for your suport
João Matos
www.joaomatosrc.com
Some colour squemes still available direct form China warehouse.
From Portugal, next week i will receive more... and some not reserved :-)
I send you an message.
Thanks for your suport
João Matos
www.joaomatosrc.com
#155
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Feel the wind... :-)
[youtube]http://www.youtube.com/watch?v=1pPjKWmwd4w[/youtube]
[youtube]http://www.youtube.com/watch?v=TDKNQNrSRAk[/youtube]
[youtube]http://www.youtube.com/watch?v=Zy4f4mFD2F0[/youtube]
João Matos
www.joaomatosrc.com
[youtube]http://www.youtube.com/watch?v=1pPjKWmwd4w[/youtube]
[youtube]http://www.youtube.com/watch?v=TDKNQNrSRAk[/youtube]
[youtube]http://www.youtube.com/watch?v=Zy4f4mFD2F0[/youtube]
João Matos
www.joaomatosrc.com
#156
RE: EXM MINI
Hello João:
Fantastic airfield, it is civilian or military ?
Really your models are a different way of understand the Jet models. A new dimension, the era of wood.
Congrats again for your great job in this models.
Regards.
Carlos Márquez.
_________________________________
www.cmjets.blogspot.com
Fantastic airfield, it is civilian or military ?
Really your models are a different way of understand the Jet models. A new dimension, the era of wood.
Congrats again for your great job in this models.
Regards.
Carlos Márquez.
_________________________________
www.cmjets.blogspot.com
#159
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Hi
With this wind... Slow or fast... Only depends the orientation :-) lolololol
Before start was 50 km/h Wind :-)
Joao Matos
www.joaomatosrc.com
With this wind... Slow or fast... Only depends the orientation :-) lolololol
Before start was 50 km/h Wind :-)
Joao Matos
www.joaomatosrc.com
#161
Senior Member
Join Date: Aug 2006
Location: Petah-Tikva, ISRAEL
Posts: 291
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
what a disappointment...
we heard about this plane here on RCU for so long, got so many promises for video and information and eventually get these short (and sorry to say - lame) videos.
no "bling", no excitement, no nothing.
IMHO, this is how you scare customers away... after seen this videos, with all the hype, not quite sure i should get one.
we heard about this plane here on RCU for so long, got so many promises for video and information and eventually get these short (and sorry to say - lame) videos.
no "bling", no excitement, no nothing.
IMHO, this is how you scare customers away... after seen this videos, with all the hype, not quite sure i should get one.
#162
My Feedback: (13)
Join Date: Jun 2002
Location: Williamstown,
NJ
Posts: 905
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Even at a lower cost airframe, the total cost is still going to be somewhere around 4k so I am not ready to send money yet either. I need to see a quality video on a calm day with a mix of high speed and low speed flight. When I pre ordered it, I had assumed there would be flight video of the prototype long before they would become available for sale. That is how it is usually done. I just picked up a used Ultra Flash airframe a month ago because I didn't know what was happening with this thing and flying season is here.
ORIGINAL: Ravivos
what a disappointment...
we heard about this plane here on RCU for so long, got so many promises for video and information and eventually get these short (and sorry to say - lame) videos.
no ''bling'', no excitement, no nothing.
IMHO, this is how you scare customers away... after seen this videos, with all the hype, not quite sure i should get one.
what a disappointment...
we heard about this plane here on RCU for so long, got so many promises for video and information and eventually get these short (and sorry to say - lame) videos.
no ''bling'', no excitement, no nothing.
IMHO, this is how you scare customers away... after seen this videos, with all the hype, not quite sure i should get one.
#163
RE: EXM MINI
Does it fly upside down? Can it be looped? Does it do knife edge? Can you pull it round corners without snapping the wings off? Does it fly at more than 10mph above the stall speed? Can it be landed properly?
Has it had thorough flight testing before being released?
If the wind was so bad, why didn't you post a video from when the weather was better (or is this the only flight it's had)?
Has it had thorough flight testing before being released?
If the wind was so bad, why didn't you post a video from when the weather was better (or is this the only flight it's had)?
#164
My Feedback: (57)
RE: EXM MINI
ORIGINAL: siclick33
Does it fly upside down? Can it be looped? Does it do knife edge? Can you pull it round corners without snapping the wings off? Does it fly at more than 10mph above the stall speed? Can it be landed properly?
Has it had thorough flight testing before being released?
If the wind was so bad, why didn't you post a video from when the weather was better (or is this the only flight it's had)?
Does it fly upside down? Can it be looped? Does it do knife edge? Can you pull it round corners without snapping the wings off? Does it fly at more than 10mph above the stall speed? Can it be landed properly?
Has it had thorough flight testing before being released?
If the wind was so bad, why didn't you post a video from when the weather was better (or is this the only flight it's had)?
#165
RE: EXM MINI
Good point
But even that doesn't seem possible. When I asked for the total cost (incl shipping which hadn't been confirmed at that stage), my question was ignored!!
It seems that even if you want to do the testing for them, you can't get hold of a model anyway
I said I wasn't going to post any more.....shame on me
But even that doesn't seem possible. When I asked for the total cost (incl shipping which hadn't been confirmed at that stage), my question was ignored!!
It seems that even if you want to do the testing for them, you can't get hold of a model anyway
I said I wasn't going to post any more.....shame on me
#166
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
#167
RE: EXM MINI
Joao,
Are you not going to address any of the questions that are being asked?
You can't keep putting your fingers in your ears and ignoring everyone forever [:@]
Are you not going to address any of the questions that are being asked?
You can't keep putting your fingers in your ears and ignoring everyone forever [:@]
#168
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
Hi Darren.
As you said you are constante cristicism. I respect your opinion... But you have to respect my work!
All of you not paied yet... so have to wait until i decide that all is ready to start the sells.
Who was in a pre-order list have to wait... and as soon all is ready i decide to start the delivers!
I must show the final products... this model starts the develope 6 months ago... Now i show you the final result!
I put an pre-order... not paied... cause i think all modelers could find a cheap solution... in this wood jet type... complet diferent from tradicional Boomerang type! And all of you could see all process of develope!
I am not ignore you or others... But i have to wait to show the best solution for now!
I have to make static stress test.... i have to make new landing gears... new tailipes... new tanks!
And the with best price i can find...
I am trying to put my models in hands of pilots with good experience to put the planes in limits.
Please understand all process of deveope of this model!
I think all costumer will love the final result of EXM MINI...
Last weekend EXM SPORT was certificate by Spaish Aeromodelling Federation & wins best sport flight in Spain Meeting (Bellota jets)... i think EXM MINI can have the same results!
Please understand and continue looking for the progress of this wood jet.
When i invite you to PAM 2013 ... i was not joking... all modellers opinion is very important to me... and yours is important too!!
Thanks for your suport.
João Matos
www.joaomatosrc.com
As you said you are constante cristicism. I respect your opinion... But you have to respect my work!
All of you not paied yet... so have to wait until i decide that all is ready to start the sells.
Who was in a pre-order list have to wait... and as soon all is ready i decide to start the delivers!
I must show the final products... this model starts the develope 6 months ago... Now i show you the final result!
I put an pre-order... not paied... cause i think all modelers could find a cheap solution... in this wood jet type... complet diferent from tradicional Boomerang type! And all of you could see all process of develope!
I am not ignore you or others... But i have to wait to show the best solution for now!
I have to make static stress test.... i have to make new landing gears... new tailipes... new tanks!
And the with best price i can find...
I am trying to put my models in hands of pilots with good experience to put the planes in limits.
Please understand all process of deveope of this model!
I think all costumer will love the final result of EXM MINI...
Last weekend EXM SPORT was certificate by Spaish Aeromodelling Federation & wins best sport flight in Spain Meeting (Bellota jets)... i think EXM MINI can have the same results!
Please understand and continue looking for the progress of this wood jet.
When i invite you to PAM 2013 ... i was not joking... all modellers opinion is very important to me... and yours is important too!!
Thanks for your suport.
João Matos
www.joaomatosrc.com
#170
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
#172
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
#174
Senior Member
Join Date: Oct 2011
Location: ontario,
CA
Posts: 145
Likes: 0
Received 0 Likes
on
0 Posts
RE: EXM MINI
hey joao keep up the good work and get these out i cant wait for this to be my first turbin or edf jet i allready fly df ones but i really like this one
#175
Senior Member
Thread Starter
Join Date: Mar 2008
Location: Trofa, PORTUGAL
Posts: 468
Likes: 0
Received 0 Likes
on
0 Posts