jetnuno

Hi guys

I have received 2 F16 to start building. One is for me and will go with a P100 or P160 and the other is for a friend that will be ride by a 90RXi. Both with Futaba gear.

Strong points for this kit are
Outstanding paint job
Nice layup
Nice gear
Price/quality ratio

Points to improve
Fuel tanks don't fir (wainting for a reply from John)
Minor parts missing
Canopy fitting (in one plane)

Ok, let's start with some pics:
- Inside fuse painting
-Cockpit assembly
- Pneumatic install

Dieselman1220

My Feedback: (25)

Awesome, I'll be following this thread closely

Dig it

Well the jet looks awesome but that pilot looks like a super villain dipped him in a batch of distortion elixir.

FalconWings

My Feedback: (57)

Nuno, canopy not fitting? have you checked that it doesn't trip with the EV5 valve? its a common problem.

jetnuno

Hi

No, the problem is because the glass was not properly glued at the factory and the canopy fram and glass were twisted. Had to pull apart the glass and will be gluing a new one

Regards