Its Coming!!!! Skymaster 1/5 F-16 Arf Plus Pro
#503
Junior Member
Hi Anton,
I have now ordered the 1/5 F-16 )
Will it be possible for you to post close-up pictures of the Ordinance Set - especially the external tanks and pylons / bombs for STA 3 & 7.
Thank you
Jens
I have now ordered the 1/5 F-16 )
Will it be possible for you to post close-up pictures of the Ordinance Set - especially the external tanks and pylons / bombs for STA 3 & 7.
Thank you
Jens
#505
My Feedback: (8)
I ran my JC Mammoth (SP) on the ground at full throttle and the forward intake collapses (bottom). I will reinforce the intake (through nose wheelwell) but my question is should I remove the upper half of the bypass to reduce this problem or are there more benefits to keep full bypass?
Last edited by TJPro351; 07-11-2015 at 11:41 AM.
#507
Hey guys, do you think the airpower ev5u-pro will be ok for the landing gear on this jet? Also, I know everyone is saying to use the Kingtech 210 or similar but will the Kingtech K-180 fly this jet in a scale like manner? Thanks
Also, will the Hitec 7954 servos be good for this size of jet? They are fast while pushing 403oz. Thanks
steven
Also, will the Hitec 7954 servos be good for this size of jet? They are fast while pushing 403oz. Thanks
steven
#508
I looked a few of these at KY jets but I dont think a single one flew, unless I missed it.
#509
only a few customers received the ordinance kits, sorry, the products of ordinance kits are delay . so, i still not see the F-16 1/5 fly with the full ordinance from customers yet, only Likai did it.,
#511
My Feedback: (2)
Join Date: Dec 2008
Location: CORAL GABLES,
FL
Posts: 234
Likes: 0
Received 0 Likes
on
0 Posts
I have flown mine with all the ordinance, plenty of pics on my Facebook page J.C. Alvarez. Plane flys great with all the ordinance, just needed a little elevator trim CG was good with all equipment on. My CG is at 305.
Last edited by j.c.a.; 07-14-2015 at 05:31 PM.
#516
new 1/5 F-16 maiden with K210 today in Taiwan.,
https://www.youtube.com/watch?v=5clI1K0aZFY&feature=youtu.be
https://www.youtube.com/watch?v=5clI1K0aZFY&feature=youtu.be
Last edited by pilot tw; 07-18-2015 at 07:47 AM.
#517
My Feedback: (20)
What happened to the ventral fins between the photo in the start up area and and the take off? The ventral fins are not on during the flight.
It is good to see that there does not seem to be any yaw instability at high AOA during rolling maneuvers with out the ventral fins. I see this as very good news for the stability for the 1/5 F-16 model.
Can you tell us the take off weight and where the CG was set for this flight. I hope to take delivery of my kit next month.
Thanks
Gary Jones
It is good to see that there does not seem to be any yaw instability at high AOA during rolling maneuvers with out the ventral fins. I see this as very good news for the stability for the 1/5 F-16 model.
Can you tell us the take off weight and where the CG was set for this flight. I hope to take delivery of my kit next month.
Thanks
Gary Jones
#518
i just call this guy, who said first flight was forget install the ventral fins and do not know the take off weight , the CG is 280mm like the manual.,
here is second flight video with the smoke,
https://www.youtube.com/watch?v=KHJxdK9eie0
here is second flight video with the smoke,
https://www.youtube.com/watch?v=KHJxdK9eie0
#522
yes, this is RTF finished at Skymaster factory., and we will release these scale probe detail set on Oct , please waiting a few weeks that we will update to our F-16 1/5 web page.,