skymaster pc-21
#176
#177
#180
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
Good day All.
I test flew my PC 21 this weekend and it flies like a dream. Anton and Skymaster team this is a great aircraft, flies so realistic and had to do no trimming at all. only mixed in a bit of down elevator in when flaps are deployed. Power plant is non other that the King pt60tp with a 24 x23,5 five blade. Radio Futaba 18MZ, air system is airpower sequencer and failsafe. I did three flights and enjoyed every moment. Last one I flew for 7mins and still had a 1/4 tank left. Attached are some pics and will try up load a video or two. Thanks to all that helped with info and questions.
Have a great day.
Regards
JB
PS. I need to get a new spinner, the CNC cut one as mine is out of balance.
Would you pleas to advise me your CG and travel : ailerons, elevator, rudder.
i'm worried about elevator, it looks to big 37mm if follow the manual.
Friend of my close to maiden and worried about that.
Thank you
Kind regards,
Sergey
Last edited by helifox; 01-18-2016 at 05:47 AM.
#182
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
Hi to ewerybody,
Frends, my friend need help, he stuck with aileron horns and pushroads installation.
As I understand the bird has inner pushroads for aileron, but we couldn't understand how to fix the horn to aileron (we are afraid to damage the life hinges when move more then 30mm from center to cut slot).
I'll be very appreciate for any information and photo with installation.
Thank you in advance.
Kind regards,
Sergey
P.S. My E-Mail: [email protected]
Frends, my friend need help, he stuck with aileron horns and pushroads installation.
As I understand the bird has inner pushroads for aileron, but we couldn't understand how to fix the horn to aileron (we are afraid to damage the life hinges when move more then 30mm from center to cut slot).
I'll be very appreciate for any information and photo with installation.
Thank you in advance.
Kind regards,
Sergey
P.S. My E-Mail: [email protected]
Last edited by helifox; 01-27-2016 at 06:07 AM.
#183
My Feedback: (23)
Hi to ewerybody,
Frends, my friend need help, he stuck with aileron horns and pushroads installation.
As I understand the bird has inner pushroads for aileron, but we couldn't understand how to fix the horn to aileron (we are afraid to damage the life hinges when move more then 30mm from center to cut slot).
I'll be very appreciate for any information and photo with installation.
Thank you in advance.
Kind regards,
Sergey
P.S. My E-Mail: [email protected]
Frends, my friend need help, he stuck with aileron horns and pushroads installation.
As I understand the bird has inner pushroads for aileron, but we couldn't understand how to fix the horn to aileron (we are afraid to damage the life hinges when move more then 30mm from center to cut slot).
I'll be very appreciate for any information and photo with installation.
Thank you in advance.
Kind regards,
Sergey
P.S. My E-Mail: [email protected]
i do not recommend you go with inner links in ailerons or rudder or elevators. You will kill a lot of the servos resolution and torque.
we use hitec7955tg servos with external link.
Удачи
George
SkyMaster Greece www.rcjet.gr
#184
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
Previet Sergey
i do not recommend you go with inner links in ailerons or rudder or elevators. You will kill a lot of the servos resolution and torque.
we use hitec7955tg servos with external link.
Удачи
George
SkyMaster Greece www.rcjet.gr
i do not recommend you go with inner links in ailerons or rudder or elevators. You will kill a lot of the servos resolution and torque.
we use hitec7955tg servos with external link.
Удачи
George
SkyMaster Greece www.rcjet.gr
Thanks for information, but will try to do inner pushroads as manual sais. Will try to find solution (may be somebody help with pictures). My friend will install JR8911 all around.
Харистополи,
Kind regards,
Sergey
Last edited by helifox; 01-27-2016 at 08:14 AM.
#185
Junior Member
Join Date: May 2015
Posts: 10
Likes: 0
Received 0 Likes
on
0 Posts
Some custom screens are available for pilatus pc-21 and PC-12
https://www.facebook.com/0gravity.group/videos/1805509496342877
https://www.facebook.com/0gravity.group/videos/1805509496342877
Last edited by pixeleleven; 02-03-2016 at 11:05 PM.
#186
Hi John
I maidened your PC-21 this weekendand it is a absolute fantastic flying plane (see pics attached). Definitely thebest Prop Driven plane I have flown in 20 years!!!
Marcel van Dellen
AUSTRIA
#188
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
#192
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
Hi guys,
my frend start building (assembling) SM PC-21. He is trying to do as half copy, why half- because there no real aircraft in those library
Power plant will K-60TP
Some scale details was added:
PITO, angle of attack sensor, radio altimeter antennas, communication, navigation antennas, wing landing light
Prototype:
GPS:
prototype for model (not instal yet)
my frend start building (assembling) SM PC-21. He is trying to do as half copy, why half- because there no real aircraft in those library
Power plant will K-60TP
Some scale details was added:
PITO, angle of attack sensor, radio altimeter antennas, communication, navigation antennas, wing landing light
Prototype:
GPS:
prototype for model (not instal yet)
Last edited by helifox; 03-28-2016 at 12:09 AM.
#194
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
Continuing with scale details:
If somebody is interesting, you can see all assembling process on that threat: http://www.yug-models.ru/forum/index.php?showtopic=9866
If somebody is interesting, you can see all assembling process on that threat: http://www.yug-models.ru/forum/index.php?showtopic=9866
#196
Pc-21
Good day from Athens again,few more pictures of my plane,Animated pilots , Cockpit and the digital LCD screens.
Also Argiris Gianetakis sharing with us at the following videos the assembling of the Animated pilots , Cockpit and the digital LCD screens .
Pilots.
https://youtu.be/TRdJiHQJmGQ
Lcd Screens.
https://youtu.be/5XI80fK5K40
Also Argiris Gianetakis sharing with us at the following videos the assembling of the Animated pilots , Cockpit and the digital LCD screens .
Pilots.
https://youtu.be/TRdJiHQJmGQ
Lcd Screens.
https://youtu.be/5XI80fK5K40
Last edited by mich-67; 04-18-2016 at 10:36 AM.
#198
#199
Join Date: Apr 2014
Location: Krasnodar, RUSSIAN FEDERATION
Posts: 125
Received 0 Likes
on
0 Posts
Frends,
would you advise what pressure should be in gear shock ubsorber?
I pressure 110 psi, for main it's OK, but for the nose it's look like to tight (pressed by hands).
would you advise what pressure should be in gear shock ubsorber?
I pressure 110 psi, for main it's OK, but for the nose it's look like to tight (pressed by hands).
#200
Dear Helifox pls note that you should guide the actual pressure you need from 105 to max 135 psi based on your model weight, i did not finish mine yet to advise you.
Also just in case you dint found so far you can check and guide skymaster instructions.at: http://www.skymasterjet.com/oleolegs.htm
best regards from Athens
Also just in case you dint found so far you can check and guide skymaster instructions.at: http://www.skymasterjet.com/oleolegs.htm
best regards from Athens