Were do you buy your jet accessories
#1
Thread Starter
My Feedback: (34)
Were do you buy your jet accessories
Hey juys I wanted to know were you guys get your jet accessories.
Im looking to order my air accessories for my velox xl
I know im being a little odd but I can't believe the prices for air fill valves
Most of my jets have Robart air valves but at $18 each with all my jets running 2 air system for gear/door/brake
But I needed to order 3 air valves for 2 projects im working on
I have been useing Airpower mini air valves for a hole $11 each with no issues but I can't find anyone who has them in stock. And the only ones I can seem to find are 18 to 20 each. ( 60 for 3 air fill valves seems crazy when I used to be able to get them for 33 dollars for 3
I normally only get my parts from Towerhobbies or Dreamworks
Im sure there are others supplier that I don't know about
Im looking to order my air accessories for my velox xl
I know im being a little odd but I can't believe the prices for air fill valves
Most of my jets have Robart air valves but at $18 each with all my jets running 2 air system for gear/door/brake
But I needed to order 3 air valves for 2 projects im working on
I have been useing Airpower mini air valves for a hole $11 each with no issues but I can't find anyone who has them in stock. And the only ones I can seem to find are 18 to 20 each. ( 60 for 3 air fill valves seems crazy when I used to be able to get them for 33 dollars for 3
I normally only get my parts from Towerhobbies or Dreamworks
Im sure there are others supplier that I don't know about
#15
Thread Starter
My Feedback: (34)
Tried them first on my carf rookie 2. Junk they were
I wonder if I could use the serria valve with the robart fill. Life would be great if robot just sold there valve without the fill adapter. I would order a bunch as I only have 14 or so planes but it drives me crazy that there not all the same
#16
Thread Starter
My Feedback: (34)
Tried them first on my carf rookie 2. Junk they were
I wonder if I could use the serria valve with the robart fill. Life would be great if robot just sold there valve without the fill adapter. I would order a bunch as I only have 14 or so planes but it drives me crazy that there not all the same
#17
My Feedback: (11)
Junk I once ordered 10 of them to get all my birds useing the same type buttr
Tried them first on my carf rookie 2. Junk they were
I wonder if I could use the serria valve with the robart fill. Life would be great if robot just sold there valve without the fill adapter. I would order a bunch as I only have 14 or so planes but it drives me crazy that there not all the same
Tried them first on my carf rookie 2. Junk they were
I wonder if I could use the serria valve with the robart fill. Life would be great if robot just sold there valve without the fill adapter. I would order a bunch as I only have 14 or so planes but it drives me crazy that there not all the same
Dreamworks. All. Day. Long. You just point and click, then forget.
Todd is one of the coolest most straight up guy you've ever met. And he has lots of actual, successful flying experience.
#18
Join Date: Dec 2006
Location: harwich, UNITED KINGDOM
Posts: 709
Likes: 0
Received 0 Likes
on
0 Posts
I can tell you where you can get the best air fill valves that have been tested for years and years for about $1 each.
get a new valve for a car wheel remove the rubber from the bottom and solder on a barb and wire on your air line they are the best you will get, I have tried the others and as you say they are not the best, this gives you the best for the cheapest price
get a new valve for a car wheel remove the rubber from the bottom and solder on a barb and wire on your air line they are the best you will get, I have tried the others and as you say they are not the best, this gives you the best for the cheapest price
#21
Thread Starter
My Feedback: (34)
14 jets....shiza. Maintaining that fleet must be a pain in the ar$e. I remember when I had a fleet. Ugh..... And I'm getting up there again. Dayum.
Dreamworks. All. Day. Long. You just point and click, then forget.
Todd is one of the coolest most straight up guy you've ever met. And he has lots of actual, successful flying experience.
Dreamworks. All. Day. Long. You just point and click, then forget.
Todd is one of the coolest most straight up guy you've ever met. And he has lots of actual, successful flying experience.
#24
Thread Starter
My Feedback: (34)
Thanks for the call out. Lol.
While I have a few nice turbines I have never been able to save the $$ to buy one all new
While its 6 dollars different I need 3 so that is $18 more but that is not why I started this posting
As I have always gotten my stuff from dreamworks I never really thought of other options are out there
Also I really wanted to get the airpower retracts/brake in one valve to save rx channels
While I have a few nice turbines I have never been able to save the $$ to buy one all new
While its 6 dollars different I need 3 so that is $18 more but that is not why I started this posting
As I have always gotten my stuff from dreamworks I never really thought of other options are out there
Also I really wanted to get the airpower retracts/brake in one valve to save rx channels
#25
Thread Starter
My Feedback: (34)
Thanks for the call out. Lol.
While I have a few nice turbines I have never been able to save the $$ to buy one all new
While its 6 dollars different I need 3 so that is $18 more but that is not why I started this posting
As I have always gotten my stuff from dreamworks I never really thought of other options are out there
Also I really wanted to get the airpower retracts/brake in one valve to save rx channels and wanted to get everything at one place
While I have a few nice turbines I have never been able to save the $$ to buy one all new
While its 6 dollars different I need 3 so that is $18 more but that is not why I started this posting
As I have always gotten my stuff from dreamworks I never really thought of other options are out there
Also I really wanted to get the airpower retracts/brake in one valve to save rx channels and wanted to get everything at one place