Mississippi Afterburner 2015
#229
My Feedback: (162)
The mig and f18 chasing each other yesterday was fun to watch. 2 huge jets!
The rebel pro was tearing up the skies. That ones on my list . Gotta sell some toys and get one of these!
the new weatronics radio is pretty nice. One thing I really liked about it is the way you can set up your throttle. You can set the throttle stick so that from 1/3 to Full stick is throttle and below 1/3 stick is spring loaded and used for brake. Pretty nice! I should have taken a video of that working!
The rebel pro was tearing up the skies. That ones on my list . Gotta sell some toys and get one of these!
the new weatronics radio is pretty nice. One thing I really liked about it is the way you can set up your throttle. You can set the throttle stick so that from 1/3 to Full stick is throttle and below 1/3 stick is spring loaded and used for brake. Pretty nice! I should have taken a video of that working!
#239
My Feedback: (15)
Join Date: Jun 2004
Location: Bartlett,
TN
Posts: 174
Likes: 0
Received 0 Likes
on
0 Posts
Jon, I tired to send PM but does not seem to be getting out.
Who is running Weatronic gear? I have been hording Weatronic stuff for 7 years mostly connected to a Profi 4000.
Missed another chance to my first MSAB may be I will make 25th. Just small stuff here R54 with pending hopup with Merlin 90 some Rookie2 parts and an old rebuilt Central Super Eagle.
I would be jealous of flying time but I cannot see a plane very well on the grey sky.
Cheers
Charles
Who is running Weatronic gear? I have been hording Weatronic stuff for 7 years mostly connected to a Profi 4000.
Missed another chance to my first MSAB may be I will make 25th. Just small stuff here R54 with pending hopup with Merlin 90 some Rookie2 parts and an old rebuilt Central Super Eagle.
I would be jealous of flying time but I cannot see a plane very well on the grey sky.
Cheers
Charles
#240
My Feedback: (162)
I sent a pm back. I was only at MAB Friday.. Weatronics has a display there with some nice stuff! I really like the brake setup and interchangeable face plates. The radio is around $1800, has around 96 channels. I thought the 12 channel receiver was a little rich, $269 if I remember right (prob wrong on that one lol)
#246
My Feedback: (21)
You betcha, really neat radio with huuugggeee capabilities. Lots of folks chatting up the ultimate jets tent. Downlink , up to 3 independent receivers individually bound all talking to transmitter. Really neat stuff. Woody can elaborate.
Last edited by yeahbaby; 04-25-2015 at 12:35 PM.
#248
Here is the nose strut.
It took me 60 hours on the CAD to achieve this result. Every single nut, fastener and casting rib is accurately represented.
Laser 3D printed at 50 micron resolution. Each strut takes 8 hours to print...
It took me 60 hours on the CAD to achieve this result. Every single nut, fastener and casting rib is accurately represented.
Laser 3D printed at 50 micron resolution. Each strut takes 8 hours to print...
Last edited by olnico; 04-25-2015 at 01:24 PM.