Sebart Mini Avanti w/ K45 build thread
#553
Join Date: Jun 2008
Location: hasselby, SWEDEN
Posts: 15
Likes: 0
Received 0 Likes
on
0 Posts
J125.1037 made by Jet-1a. They are doing sets for the Mini Avanti
email them at [email protected]
email them at [email protected]
#562
Junior Member
Join Date: Sep 2017
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
#565
Junior Member
Join Date: Sep 2017
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I believe I will go with the K70.
Thank you...
#566
Junior Member
Join Date: Sep 2017
Posts: 8
Likes: 0
Received 0 Likes
on
0 Posts
I would like to put on at least 2 1/4" to fly off grass. 2 1/2" would be nice.
#567
My Feedback: (11)
Have a look at this strut for the nose gear. https://www.fantastic-jets.com/epage...ucts/025NLM100
Bob
#568
Join Date: Mar 2012
Location: Saugus, CA
Posts: 35
Likes: 0
Received 0 Likes
on
0 Posts
Mini avanti build
Here is the CG of my Mini Avanti build. I wanted to mount the fuel tank as far aft as I could. It’s still forward of the CG.
Has anyone calculated CG with full fuel? (1.3L CM jet tank)
Here are the CG calculations I came up with. 145 mm recommended. I figured that I should never see the empty CG in flight. Hopefully...
Full Fuel 138.3 mm aft of the leading edge. Total aircraft weight 189.9oz
Landing Fuel. 148.9 mm aft of the leading edge. 165.5oz
Empty Fuel. 152.5 mm aft of the leading edge. 160.0oz
Has anyone calculated CG with full fuel? (1.3L CM jet tank)
Here are the CG calculations I came up with. 145 mm recommended. I figured that I should never see the empty CG in flight. Hopefully...
Full Fuel 138.3 mm aft of the leading edge. Total aircraft weight 189.9oz
Landing Fuel. 148.9 mm aft of the leading edge. 165.5oz
Empty Fuel. 152.5 mm aft of the leading edge. 160.0oz
Last edited by a25afm; 10-11-2017 at 03:42 PM.
#572
Junior Member
Join Date: Nov 2014
Posts: 1
Likes: 0
Received 0 Likes
on
0 Posts
I see you have the tank from CMjets. I asked Carlos form there about purchasing one but odd that he needs a ID number from me? He said Italy uses this for tax purposes. They call it a National Document Identity?? I looked it up and it is like our social security number. I asked him if there is any other way because I cannot give him that. Did anyone else give this or am I mistaken of the ID he is asking for?? I need the 1.5L tank form him and the Itrap40 for my Mini Avanti S
Thanks, JB
Thanks, JB
#573
Chatty.
#574
Join Date: Feb 2017
Posts: 70
Likes: 0
Received 0 Likes
on
0 Posts
I fly off a grass runway and the electrons have been bullet-proof.
If I add up all the money I have wasted over the years purchasing cheap retracts, I could have bought many electrons.
#575
Join Date: Sep 2017
Location: Waidhofen/Thaya in Austria
Posts: 21
Likes: 0
Received 0 Likes
on
0 Posts
Hello,
I already received the main and hopper tank from Carlos
Should the CG be set up with empty main tank?
So I've made it anyway with my Avanti S.
Thanks,
Markus
I already received the main and hopper tank from Carlos
Should the CG be set up with empty main tank?
So I've made it anyway with my Avanti S.
Thanks,
Markus