Jeti DS-24
10-04-2017, 07:59 AM
#277
Our first batch of Jeti DS-24 has been produced and shipped to us. Looks like radios will be sitting here for few more days till we get the sticker. Unfortunately hurricane IRMA set us back by few days.
Zb/Jeti USA
10-04-2017, 09:22 AM
#278
My Feedback: (13)
Ok, sorry to keep asking here but I'm looking for clarity: that first batch of 50 is sitting in the shop waiting the FCC stickers and then shipment?
My understanding was that approval had been granted and that's why Esprit called for the additional $1400. I understand the hurricane is slowing things down dramatically, but Esprit asked for the additional money after the hurricane, so the effects should have been known at that time. Is there a concern the FCC will demand physical changes and the 50 there will be paperweights?
A friend was told the end of Nov for shipment when he called yesterday. Is that correct or is your "a couple more days" correct? Based on the email asking for more money, shipment was to occur tomorrow or a week from. A couple days delay on that would be mid October, not the late November stated. ZB, please help us understand here a bit
Thank you
Dave
My understanding was that approval had been granted and that's why Esprit called for the additional $1400. I understand the hurricane is slowing things down dramatically, but Esprit asked for the additional money after the hurricane, so the effects should have been known at that time. Is there a concern the FCC will demand physical changes and the 50 there will be paperweights?
A friend was told the end of Nov for shipment when he called yesterday. Is that correct or is your "a couple more days" correct? Based on the email asking for more money, shipment was to occur tomorrow or a week from. A couple days delay on that would be mid October, not the late November stated. ZB, please help us understand here a bit
Thank you
Dave
10-04-2017, 02:41 PM
#279
I wonder how many of us preordered this radio? We all ponied up are $700 and now we wait. I am on 8 months and starting to think this can go on through to the end of the year if not the next. What a shame! I have invested in three aircraft with the on board Jeti system all waiting for a radio.
10-04-2017, 02:53 PM
#280
My Feedback: (13)
I'm at 11mo and a buddy is at 13. The wait I don't mind..the lack of info is frustrating me. They had no prob finding my contact when they needed $1400, but I hear nothing otherwise.
ZB I can read your post above as the FCC testing still has 4-6 weeks remaining. Is that correct?
Thank you
Dave
ZB I can read your post above as the FCC testing still has 4-6 weeks remaining. Is that correct?
Thank you
Dave
10-06-2017, 10:36 AM
#282
Jeti Duplex EX R12 REX Assist EPC 2.4GHz Receiver w/Telemetry, Stabilization - $195.00
Jeti Duplex EX R10 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $175.00
Jeti Duplex EX R7 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $145.00
What does the term stabilization refer too?
Jeti Duplex EX R10 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $175.00
Jeti Duplex EX R7 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $145.00
What does the term stabilization refer too?
10-06-2017, 10:41 AM
#283
Jeti Duplex EX R12 REX Assist EPC 2.4GHz Receiver w/Telemetry, Stabilization - $195.00
Jeti Duplex EX R10 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $175.00
Jeti Duplex EX R7 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $145.00
What does the term stabilization refer too?
Jeti Duplex EX R10 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $175.00
Jeti Duplex EX R7 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $145.00
What does the term stabilization refer too?
10-06-2017, 03:29 PM
#286
Jeti Duplex EX R12 REX Assist EPC 2.4GHz Receiver w/Telemetry, Stabilization - $195.00
Jeti Duplex EX R10 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $175.00
Jeti Duplex EX R7 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $145.00
What does the term stabilization refer too?
Jeti Duplex EX R10 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $175.00
Jeti Duplex EX R7 REX Assist 2.4GHz Receiver w/Telemetry, Stabilization - $145.00
What does the term stabilization refer too?
Check the Hacker Video from this year at Nuremberg Fair in Germany.
Last edited by ZB; 10-06-2017 at 03:31 PM.
10-06-2017, 03:32 PM
#287
Zb/Jeti USA
Last edited by ZB; 10-06-2017 at 03:53 PM.
10-06-2017, 03:50 PM
#288
It's quite simple there are only two options.
1) Do not do anything and wait till we get FCC out of the way. This option would leave us with radio delivery date probably mid/late December
2) Pool our resources. Order, manufacture and deliver radios to our Florida warehouse and be ready in instant when the certification passes.
It's much easier to respond with product on hand if there is some kind problem, most of the problems can be solved it in the house. It's much easier to ship overnight single box with new boards, few ferrites or even install new firmware update on all radios here in FL. Unfortunately neither us or Jeti have enough resources to be able pull this off without your help. Add cost of production and FCC/CE certifications of DS-24, Rex 900, Rex R7/10/12 Assist receivers and we are all broke.
Like we mentioned before our first shipment of DS-24 is already on the way and will be here early next week. We will have another 2 shipments arriving later this month, in 2-3 weeks we will have enough to cover all pre-orders that were placed till end of the August. All colors are covered except bright red, even black is in production. If any of you guys would be in Florida you are welcome to stop by and play with any of the DS-24
Zb/Jeti USA
1) Do not do anything and wait till we get FCC out of the way. This option would leave us with radio delivery date probably mid/late December
2) Pool our resources. Order, manufacture and deliver radios to our Florida warehouse and be ready in instant when the certification passes.
It's much easier to respond with product on hand if there is some kind problem, most of the problems can be solved it in the house. It's much easier to ship overnight single box with new boards, few ferrites or even install new firmware update on all radios here in FL. Unfortunately neither us or Jeti have enough resources to be able pull this off without your help. Add cost of production and FCC/CE certifications of DS-24, Rex 900, Rex R7/10/12 Assist receivers and we are all broke.
Like we mentioned before our first shipment of DS-24 is already on the way and will be here early next week. We will have another 2 shipments arriving later this month, in 2-3 weeks we will have enough to cover all pre-orders that were placed till end of the August. All colors are covered except bright red, even black is in production. If any of you guys would be in Florida you are welcome to stop by and play with any of the DS-24
Zb/Jeti USA
10-06-2017, 03:52 PM
#289
10-13-2017, 12:17 PM
#291
We would like to announce that on October 13th. 2017, at 16:00 EST the Federal Communication Commission and Industry Canada, Granted Equipment Authorization (FCC), and Certificate of Acceptance (IC) to Jeti USA (Esprit Model Inc.) for the Jeti Duplex EX R3 REX 900MHz Receiver w/Telemetry .
All pending orders will be shipped early next week.
Zb/Esprit
Jeti Duplex EX R3 REX 900MHz Receiver w/Telemetry
All pending orders will be shipped early next week.
Zb/Esprit
Jeti Duplex EX R3 REX 900MHz Receiver w/Telemetry
10-13-2017, 10:12 PM
#296
10-14-2017, 03:05 AM
#297
If you have an Assist as the Primary and an Rsat or R3 as a secondary via a PPM link into the Assist than I would expect stabilization to be maintained since primary / secondary receiver data should be processed before stabilization is handled.
10-14-2017, 05:48 PM
#299
