New Ultimate Jets production facilities.
03-21-2016, 08:12 AM
#26
I love all modern fighter jets, not a fan of things that were around pre Vietnam. I think the market would love to have much more scale and better flying typical jets as well. I think having true scale of more popular models is more profitable than the specialty jets. I'm not saying don't make those rarely seen jets but don't limit yourself. I know Oli isn't doing the mibo a-10 but this is a perfect example of true scale and design, not much guess work compared to the semi scale Asian arf a-10
03-21-2016, 09:45 AM
#27
Thread Starter
This is exactly what I am doing for our first kit.
07-26-2016, 12:13 PM
#37
Thread Starter
Here are a couple of pictures of our new milling Robot.
Siemens operated Kuka KR240 with 3100 mm reach.
2 tons
80 degrees per second on all axis with 240 lbf of torque.
0.08 mm repeatability.
12 kW quadruple bearing spindle.
A beast that can mill plugs at 80 inches per second...
Siemens operated Kuka KR240 with 3100 mm reach.
2 tons
80 degrees per second on all axis with 240 lbf of torque.
0.08 mm repeatability.
12 kW quadruple bearing spindle.
A beast that can mill plugs at 80 inches per second...
07-26-2016, 12:16 PM
#38
Here are a couple of pictures of our new milling Robot.
Siemens operated Kuka KR240 with 3100 mm reach.
2 tons
80 degrees per second on all axis with 240 lbf of torque.
0.08 mm repeatability.
12 kW quadruple bearing spindle.
A beast that can mill plugs at 80 inches per second...
Siemens operated Kuka KR240 with 3100 mm reach.
2 tons
80 degrees per second on all axis with 240 lbf of torque.
0.08 mm repeatability.
12 kW quadruple bearing spindle.
A beast that can mill plugs at 80 inches per second...
07-26-2016, 12:22 PM
#39
Thread Starter
12-12-2016, 09:24 AM
#40
Thread Starter
Here is a short video of our new Kuka robot machining a fin.
https://www.facebook.com/523469480996666/videos/1327383847271888 This is a 4000 lbs beast, with a capacity of 240 pound force and maximum speed of 80" per second...
https://www.facebook.com/523469480996666/videos/1327383847271888 This is a 4000 lbs beast, with a capacity of 240 pound force and maximum speed of 80" per second...
Last edited by olnico; 12-12-2016 at 09:28 AM.
12-25-2016, 08:19 PM
#48
Thread Starter
05-19-2017, 07:09 AM
#49
Thread Starter
Our latest additions:
A giant Kuka KR500 on a 30 meter precision rail.
Perfect for milling full scale wing molds, spars, rocketry components.
And a large CNC router, with Siemens drives and controller.
5 meters by 3 meters with aluminum and carbon fiber milling capacity in wet phase or vacuum extraction. 30 kW quad bearing spindle...
Usefull to cut our pre-preg UHM carbon fiber plates!!!
A giant Kuka KR500 on a 30 meter precision rail.
Perfect for milling full scale wing molds, spars, rocketry components.
And a large CNC router, with Siemens drives and controller.
5 meters by 3 meters with aluminum and carbon fiber milling capacity in wet phase or vacuum extraction. 30 kW quad bearing spindle...
Usefull to cut our pre-preg UHM carbon fiber plates!!!
