TonyBuilder

My Feedback: (11)

Mine should ship next week, I got a custom paint job.

TB

marquisvns

Hi Everyone,

Here's something you might also want to do in case if your servo bracket is somewhat loose. The little black dot right by the strut is a set screw, drilled and tapped to pin down the steering servo bracket.

Cheers,
Barry

DMichael

My Feedback: (5)

Tony - did you submit your own scheme or did you order one of the two custom schemes on the skymaster usa website? If you submitted your own what is the cost?

TonyBuilder

My Feedback: (11)

I picked one off the website but you can submit your own $400

TB

erh7771

My Feedback: (30)

Pray tell

- how long is the thrust tube for this model?

- what are the intake dimensions

Thx in advance for any input

Regards

Wclays

My Feedback: (85)

I will have mine at Waco. Just got info that it has shipped

Clay

TonyBuilder

My Feedback: (11)

Lucky you, I'm hopping mine will ship so I can have mine for Waco

TB

Stratotanker

My Feedback: (3)

myersflyers,

The lettering is painted on. Sorry for the late reply.

Chris

Helijet

Oops...anyone else NOT get the retracts or was it just my kit???

D.W.

marquisvns

The retracts will be sent separate from the airframe.

Thanks,
Barry

TonyBuilder

My Feedback: (11)

^^^^^^^^^

I thought I heard they were shipping separately, but I could be wrong.


TB

Helijet

OK..no worries...may have missed that post.
In the meantime, I may have to eye a new Kingtech 120......!!!!

D.W.

gunradd

My Feedback: (9)

Started working on the gear doors. Will post more pics how I did it tomorrow after the hysol dries. They sent me one extra gear door so I cut that up and used it to cover the retract.

TonyBuilder

My Feedback: (11)

I want an extra gear door.

TB

sysiek

My Feedback: (176)

Do you guys will have the eurofighter jet and maybe some other scale jets ? What is the next in line from T1? Thanks.

marquisvns

Hi guys, I decided to add an extra anti rotational pin at the trailing edge of the vertical fin. The prototype Kris and I had out at Kentucky had a breach of integrity at the vertical fin spar clamp bulkhead, this was from the power of a K-170 pushing through a violent snap roll, since then the factory increased the thickness of the bulkhead and improved hysol mixing ratio, plus a bead of carbon fiber in place.



Regards,
Barry

marquisvns

We sure will, besides the EF, a large F-22 is in the making at a 1/7 scale about 106".

Regards,
Barry

sysiek

My Feedback: (176)

Maybe some f-22 pictures and do you think the will make bigger eurofighter than the one little smaller than c-arf ,and if the f-22 will be single or twin turbine or both versions.thanks.

marquisvns

By the way, wanted to thank the Venezuelans for all the help, not only they are excellent pilots, these guys really know their stuff around a jet. Without Franco, Leopoldo and Fajardo, Kris and myself couldn't make the T-1 look half as good.

Regards,
Barry

marquisvns

The raptor is only at its designing stage, probably both versions will be available.

Regards,
Barry

marquisvns

Ronnie Derhacopian did an excellent job on these doors...


An aluminum L bracket, using the clamp that it comes with, and with a bit of shimming, fits perfect!

Regards,
Barry

i3dm

My Feedback: (51)

are you guys using a servo or air cylinder for the nose door?
some pictures would be great.
thanks.

smiller

I am very interested in the EF 2000. Would like a nice scale version of the single seater. My Ferrari T-one is in paint, can't wait to get it.

Scott

Stratotanker

My Feedback: (3)

Stay tuned as I will be developing one of my custom maintenance/transport cradles this weekend. More to come.

Chris

rcpete347

My Feedback: (251)

Well boxed.