Kingtech presents the all new T1 sports jet
#326
I'm sure there are many quality builders in your area we can set you up with to build you a T-1. Most of the hard work is done on the T-1, like all the control surfaces are hinged and double control horns are installed at the factory. To me that is the most time consuming task for assembling a jet. Let me know if you want us to put the word out.
Dirk
#327
My Feedback: (11)
Hi Don,
I'm sure there are many quality builders in your area we can set you up with to build you a T-1. Most of the hard work is done on the T-1, like all the control surfaces are hinged and double control horns are installed at the factory. To me that is the most time consuming task for assembling a jet. Let me know if you want us to put the word out.
Dirk
I'm sure there are many quality builders in your area we can set you up with to build you a T-1. Most of the hard work is done on the T-1, like all the control surfaces are hinged and double control horns are installed at the factory. To me that is the most time consuming task for assembling a jet. Let me know if you want us to put the word out.
Dirk
TB
#332
I plan to Hysol nuts to the top side wing bolts so they can't work there way out. Iv had to do this in jets in the past and works well. If you ever need to remove them you still can.
#335
My Feedback: (4)
Patrick
#337
My Feedback: (11)
First thing I noticed was the wheel wells are diferent.
So it looks like they changed the bottom of the wing at the wheel wells. This eliminates the option of doing inner gear doors but this will be good for the sports guy that just wants to put the gear in and go. It does come with doors for the struts and the noes wheel, but not as nice... For me as I like doing gear doors. Now I can just forget them and move on
TB
So it looks like they changed the bottom of the wing at the wheel wells. This eliminates the option of doing inner gear doors but this will be good for the sports guy that just wants to put the gear in and go. It does come with doors for the struts and the noes wheel, but not as nice... For me as I like doing gear doors. Now I can just forget them and move on
TB
Last edited by TonyBuilder; 08-23-2016 at 03:53 PM.
#339
Thread Starter
My Feedback: (9)
First thing I noticed was the wheel wells are diferent.
So so it looks like they changed the bottom of the wing at the wheel wells. This eliminates the option of doing inner gear doors but this will be good for the sports guy that just wants to put the gear in and go. It does come with doors for the struts and the noes wheel, but not as nice... For me as I like doing gear doors. Now I can just forget them and move on
TB
So so it looks like they changed the bottom of the wing at the wheel wells. This eliminates the option of doing inner gear doors but this will be good for the sports guy that just wants to put the gear in and go. It does come with doors for the struts and the noes wheel, but not as nice... For me as I like doing gear doors. Now I can just forget them and move on
TB
#340
My Feedback: (11)
Really impressed with the finish, only one area got damaged during shipping but it's the black so should be east to fix.
The hinges look good and tight, I really like the overall engineered design of this jet.
The wing is beautiful
TB
The hinges look good and tight, I really like the overall engineered design of this jet.
The wing is beautiful
TB
Last edited by TonyBuilder; 08-23-2016 at 05:09 PM.
#341
My Feedback: (11)
The fuselage is huge!
I got lucky, in my scrap pile I have an old CF wing tube from an Aeroworks Super cub that is exactly the same size, it is about 3/4 shorter so not sure that will mater.
I love the noes cone
Nicely engineered!
The canopy is a bit ode as it just slides forward to unlock, might throw a few magnets in.
Equipment tray!
Turbine hatch is well done.
TB
I got lucky, in my scrap pile I have an old CF wing tube from an Aeroworks Super cub that is exactly the same size, it is about 3/4 shorter so not sure that will mater.
I love the noes cone
Nicely engineered!
The canopy is a bit ode as it just slides forward to unlock, might throw a few magnets in.
Equipment tray!
Turbine hatch is well done.
TB
Last edited by TonyBuilder; 08-23-2016 at 04:18 PM.
#343
Join Date: Aug 2009
Location: ogden, UT
Posts: 49
Likes: 0
Received 0 Likes
on
0 Posts
OK, going to pull the trigger on one of these very soon. Already started gathering materials for the build. Can someone post the dimensions of the equipment mounting board please. I can lay it out on my computer with all the items, I plan on laser cutting mine to make it look nice and clean.
Patrick
Patrick
The equipment tray is 12 1/4 inches long by 6 1/2 at the front and 7 inches at the rear
#345
My Feedback: (11)
Noes gear
I got the noes gear ready to install.
I went with dule push rods to spread the load from a single pivot point,
robart bolted clevis and 2/56 X 4/40 ball links on titanium rods with alternating threads for fine tuning.
I pinned the servo plate with a 2/56 button head screw.
Linkage.
Next I will prep the main gear.
TB
I went with dule push rods to spread the load from a single pivot point,
robart bolted clevis and 2/56 X 4/40 ball links on titanium rods with alternating threads for fine tuning.
I pinned the servo plate with a 2/56 button head screw.
Linkage.
Next I will prep the main gear.
TB
Last edited by TonyBuilder; 08-24-2016 at 03:47 AM.
#348
My Feedback: (34)
Got a text from DHL saying my box had arrived!!!! Was all excited then realized it was just the gear! Lol spoke with Dirk and he told me mine should be here anyway. Question for you guys that received it. Unfortunately was told that EMS does not provide tracking number but rather they bring over to US and have USPS handle the delivery but looks like the box is too big to fit in a USPS truck. Did you guys receive a notice from USPS and have to pick up box yourself at their location??
#349
Got a text from DHL saying my box had arrived!!!! Was all excited then realized it was just the gear! Lol spoke with Dirk and he told me mine should be here anyway. Question for you guys that received it. Unfortunately was told that EMS does not provide tracking number but rather they bring over to US and have USPS handle the delivery but looks like the box is too big to fit in a USPS truck. Did you guys receive a notice from USPS and have to pick up box yourself at their location??
Scott