Jets Over KY 2016 "Flea Market Week" Let it be know what your bringing!!!
07-07-2016, 07:10 AM
#26
I will bring an almost brand new Comp ARF Viper jet in the scale scheme. Included are Behotec e-gear and e-brakes, Carf large Hawk tank with 5.2l capacity instead of the smaller stock tank and a Carf smoke tank. No electronics, batteries or turbine. No damages, super clean install. Price is $4,900 firm.
Last edited by bluelevel; 07-11-2016 at 04:10 PM.
07-07-2016, 08:51 PM
#29
I'll be bringing a JetLegend F-15 in Edwards scheme RTF with a Jet Central Super Eagle(13 hours). Smart Fly Power Expander with dual A123's, Nose gear Gyro, JR servos on all flying servos and some Futaba. Robart retracts and struts on mains, spare tires, spare new nose gear strut. Setup for Futaba with a 6014 Rx. Asking $2500.00.
07-08-2016, 07:22 AM
#30
Going to lower the price on the 24qt case of oil I am selling to get rid on it. Other wise I will not bring it because I need the space for the trip and will sell it locally.
Complete new 24Qt case of aeroshell 560 $200.00 That is about $8.00 a quart. Normal price is $13.50 a Quart. That is well over $100.00 off of normal price.
Here is normal price.https://aviationoiloutlet.com/aerosh...-1-quart-case/
Complete new 24Qt case of aeroshell 560 $200.00 That is about $8.00 a quart. Normal price is $13.50 a Quart. That is well over $100.00 off of normal price.
Here is normal price.https://aviationoiloutlet.com/aerosh...-1-quart-case/
07-08-2016, 09:34 AM
#31
Nothing big but I have three Jet Cental electronic air valves for $50 each, two were mounted and used on the bench and the other was just tested when it arrived. I also have a brand new table mount drill press I payed $80.00 for I was going to sale on Craigslist for 50$ I will bring it if anyone is interested, it's perfect for hobby and small jobs.
07-08-2016, 09:52 AM
#32
Going to lower the price on the 24qt case of oil I am selling to get rid on it. Other wise I will not bring it because I need the space for the trip and will sell it locally.
Complete new 24Qt case of aeroshell 560 $200.00 That is about $8.00 a quart. Normal price is $13.50 a Quart. That is well over $100.00 off of normal price.
Here is normal price.https://aviationoiloutlet.com/aerosh...-1-quart-case/
Complete new 24Qt case of aeroshell 560 $200.00 That is about $8.00 a quart. Normal price is $13.50 a Quart. That is well over $100.00 off of normal price.
Here is normal price.https://aviationoiloutlet.com/aerosh...-1-quart-case/
Thanks,
...jim
07-08-2016, 11:59 AM
#34
This is the "Scale" FB T45, they do not manufacture this ARF any more.
I.e. tail hook, dorsal fins, working speed brakes, I do not have the re-fueler probe for the nose....
This is a the P120 size.
Started the Tiger paint scheme, needs to be finished, ran out of time...
Includes airframe, pipe, Fuel Tanks, Air Tanks, Air Speed brakes with pneumatic cylinders , Scale Nose wheel strut, Scale nose wheel doors with pneumatic cylinders, Main landing gears, brakes.. It has the main servos mounted, Flaps, Ailerons, Elevator(s), but they are not included.
I do not have the original FB nose gear retract unit, I do have a Robart retract unit.
The mains are the original FB air retract units.
Cockpit tub, no scale instruments
New canopy glass (plastic)
I.e. tail hook, dorsal fins, working speed brakes, I do not have the re-fueler probe for the nose....
This is a the P120 size.
Started the Tiger paint scheme, needs to be finished, ran out of time...
Includes airframe, pipe, Fuel Tanks, Air Tanks, Air Speed brakes with pneumatic cylinders , Scale Nose wheel strut, Scale nose wheel doors with pneumatic cylinders, Main landing gears, brakes.. It has the main servos mounted, Flaps, Ailerons, Elevator(s), but they are not included.
I do not have the original FB nose gear retract unit, I do have a Robart retract unit.
The mains are the original FB air retract units.
Cockpit tub, no scale instruments
New canopy glass (plastic)
07-08-2016, 02:00 PM
#36
ANyone interested in the Stanley's Stand Multipurpose Balancing and Working Stand please let me know I have very few on hand takes three months to get new batch, email me [email protected] or text me 305-300-1800
07-10-2016, 05:19 PM
#40
Guys,
I've my AMT Mercury 180, that I flew in my F-15 before upgrading it to a bigger engine. When I pulled it out of the plane it was running great, and has just been in sealed storage. It's got everything you need, but could probably use new ECU batteries. Not pictured, but included as well, was the glow plug battery/ignighter. Also included is extra bellmouth cover, undrilled for the fittings.
I've also a tank and regulator/hose. Just add your air trigger.
AMT 180 (set at 19.5 lbs thrust) going for $425
Scuba tank/regulator/hose going for $50
I'll be getting in on Thursday morning, and staying through Saturday night, before heading back Sunday.
Thanks,
Lance
I've my AMT Mercury 180, that I flew in my F-15 before upgrading it to a bigger engine. When I pulled it out of the plane it was running great, and has just been in sealed storage. It's got everything you need, but could probably use new ECU batteries. Not pictured, but included as well, was the glow plug battery/ignighter. Also included is extra bellmouth cover, undrilled for the fittings.
I've also a tank and regulator/hose. Just add your air trigger.
AMT 180 (set at 19.5 lbs thrust) going for $425
Scuba tank/regulator/hose going for $50
I'll be getting in on Thursday morning, and staying through Saturday night, before heading back Sunday.
Thanks,
Lance
Last edited by Lance Campbell; 07-10-2016 at 05:26 PM.
07-13-2016, 01:12 PM
#43
My Feedback: (26)
Can't make it this year, but sent an engine to a friend to sell, changed what I'm building next and need a bigger motor. Zero time since service, first generation Jet Central Rabbit, 19 lbs thrust, upgraded to latest ECU, transferable warranty, propane start but can be converted to kero start. Will be giving someone a great deal. If interested look for Jim O'Connell, he's one of the local Kentucky guys.
