Edgar Perez

My Feedback: (13)

Hi
Looking to retrofit my Jet Legend Mig-29 to a hydraulic retract setup. I bough the bits needed long time ago, with the exception of the high pressure line.
Festo have several part numbers, depending on the line color or roll length:

Silver 152697 PAN-4x0,75-SI
Silver 553888 PAN-4x0,75-SI
Blue 553906 PAN-4x0,75-BL
Blue 553894 PAN-4x0,75-BL
Black 553912 PAN-4x0,75-SW
Black 553900 PAN-4x0,75-SW
Natural 546284 PAN-4x0,75-NT
Green 553918 PAN-4x0,75-GN
Red 553924 PAN-4x0,75-RT
Yellow 553930 PAN-4x0,75-GE

I need between 20 to 30 feet. Anyone may have some extra they could sell? This is not something readily accesible via online purchase 8-(

Thanks

olnico

http://www.ultimate-jets.net/collect...pneumatic-line

These are way better than the Festos and made in the USA.

mr_matt

My Feedback: (10)

Oli are those made for push fittings only or will they go over "standard" nipples?

olnico

Both. They are 95A shore hardness and work very well with push-to-connect fittings, yet are flexible enough for barbed fittings.
The best of both worlds.

olnico

The 1/8" size is certified for 255 PSI.
4 mm takes 220 PSI.

Edgar Perez

My Feedback: (13)

Oli,
This looks perfect. Any issues with using it with oil? I will use light sewing machine oil.
Thanks

olnico

Absolutely not. This is compatible with fuels and oils.
Can be used as fuel line as well on the pressure side of the pump.