Status of JR Propo ?
#426
My Feedback: (6)
I've been looking at the DX18 and it's probably how I'll end up going at some point but I just don't like the feel of the spektrum radio. They feel plasticky, I also am not a fan of the spektrum gimbals. I haven't played with an 18 yet so I don't know for sure that they're the same feel as other spektrum radios but the gimbal comment is something I've heard from other DX18 users.
Mike
#427
Still buying DMSS gear every chance I get for my 28X. Still using my 12X for over a dozen aircraft.
Its a question of comfort and feel, not about gimmicks or having the latest greatest, wannabees.
DFA will get my full support. Status of JR Prop?...hopefully alive and well in the hands of DFA.
Its a question of comfort and feel, not about gimmicks or having the latest greatest, wannabees.
DFA will get my full support. Status of JR Prop?...hopefully alive and well in the hands of DFA.
#428
You'll just have to try it and see. They don't feel any different to the 12x's to me but, everyone is different. I also fly with a Jeti DS-16 which of course has real trick gimbals with hall sensors on them and I honestly cannot feel a difference to them either. I'm a thumbs flyer though and maybe that makes me less sensitive.
Mike
Mike
#429
My Feedback: (3)
No “issue” per se. Its just if you put an 18” pointer on a servo arm and test center and trim step =1 movements you will find a huge difference in the “old” JR servos versus newer generation ones. They are as good as other high end servos but not as good as they used to be when it was “old” JR.
I tend to think the JR we knew and loved is gone for good. I’m sure the “new” JR will be good stuff and and I wish DFA all the best. I hope they restore the good JR name. As for me ... I’ve moved on but would consider buying servos if they prove to be high quality.
In general for all of these newer, high end, high torque servos ... I HATE the over temp/amp protection they have. Some seriously bad things can happen as a result in my opinion. They all seem to have it now so no way around it. I preferred the “fight like hell til it burns up” approach.
JS
I tend to think the JR we knew and loved is gone for good. I’m sure the “new” JR will be good stuff and and I wish DFA all the best. I hope they restore the good JR name. As for me ... I’ve moved on but would consider buying servos if they prove to be high quality.
In general for all of these newer, high end, high torque servos ... I HATE the over temp/amp protection they have. Some seriously bad things can happen as a result in my opinion. They all seem to have it now so no way around it. I preferred the “fight like hell til it burns up” approach.
JS
Jamie-
Did you have a problem with a particular model JR Servo ? Just curious, as personally I have never seen a high end JR servo that wasn't nearly perfect, except for those with very worn gears.
Take care-Mike O.
PS From what I see on the DFA fb page, they are testing the new models heavily so far before release.
Did you have a problem with a particular model JR Servo ? Just curious, as personally I have never seen a high end JR servo that wasn't nearly perfect, except for those with very worn gears.
Take care-Mike O.
PS From what I see on the DFA fb page, they are testing the new models heavily so far before release.
#431
My Feedback: (13)
Jr Americas
Jeremy,
I dropped my XG14 onto my shop floor and broke top 2 switches a couple of weeks ago. Sent to JR America’s on a Friday and had it back the the following Saturday. They were very professional, helpful and had quick service. They upgraded the software and did a full test. I couldn’t have been happier. Send them an email, they answered me within an hour.
Take care,
Ron
I dropped my XG14 onto my shop floor and broke top 2 switches a couple of weeks ago. Sent to JR America’s on a Friday and had it back the the following Saturday. They were very professional, helpful and had quick service. They upgraded the software and did a full test. I couldn’t have been happier. Send them an email, they answered me within an hour.
Take care,
Ron
#435
Things are looking increasingly good for we JR users.
#437
We simply don’t know if the 28x is finished, mine is working perfectly as are lots of others. It is a superb radio and if it lasts as long as my numerous other JR transmitters it will last for many years.
I have JR transmitters dating back to 1980 which still work perfectly.
My my bet is that D FA will bring it, the 28X, back.
Lets not be so b...... negative!
I have JR transmitters dating back to 1980 which still work perfectly.
My my bet is that D FA will bring it, the 28X, back.
Lets not be so b...... negative!
#438
My Feedback: (61)
We simply don’t know if the 28x is finished, mine is working perfectly as are lots of others. It is a superb radio and if it lasts as long as my numerous other JR transmitters it will last for many years.
I have JR transmitters dating back to 1980 which still work perfectly.
My my bet is that D FA will bring it, the 28X, back.
Lets not be so b...... negative!
I have JR transmitters dating back to 1980 which still work perfectly.
My my bet is that D FA will bring it, the 28X, back.
Lets not be so b...... negative!
#442
My Feedback: (61)
yeah i get that. i was just venting about my negative experience in general with the whole company/JR thing through JRA . Here's the story.. i bought the 28X and i was king. go to get ANY help with it and nothing . i kept getting the " deer in the headlights" help.i would get handed off to team members that would try to help but knew little more than i did . it wasn't their fault as they were trying to get up to speed like all new owners. my beef was with JRA. they never received any instruction from JRpropo but yet went ahead and released a highly advanced radio to us to figure out on our own. really? 2,700 and i can't get any help? then came the problem with getting equipment. Always " out of stock" or Be in stock in a few weeks etc. then came the collapse of the company surrounded by uncertainty ,so i had enough. i'm glad their back and i hope the quality will return with it. i wish only the BEST for JR. i had to cut my loses and go to Jeti. maybe after some time passes and my confidence returns ,then i may consider going back. but for now i'm staying clear of all the mess .
#443
My Feedback: (10)
yeah i get that. i was just venting about my negative experience in general with the whole company/JR thing through JRA . Here's the story.. i bought the 28X and i was king. go to get ANY help with it and nothing . i kept getting the " deer in the headlights" help.i would get handed off to team members that would try to help but knew little more than i did . it wasn't their fault as they were trying to get up to speed like all new owners. my beef was with JRA. they never received any instruction from JRpropo but yet went ahead and released a highly advanced radio to us to figure out on our own. really? 2,700 and i can't get any help? then came the problem with getting equipment. Always " out of stock" or Be in stock in a few weeks etc. then came the collapse of the company surrounded by uncertainty ,so i had enough. i'm glad their back and i hope the quality will return with it. i wish only the BEST for JR. i had to cut my loses and go to Jeti. maybe after some time passes and my confidence returns ,then i may consider going back. but for now i'm staying clear of all the mess .
dont worry we had 3 x 28X
and where fubar....
hopeless updates , no help , no telemetric no SDK available.....
no answers....
considering we all where JR men from the start...
we have taken 4500 euros loss and never looked back...
i have seen and tried the newer "JR"servo,s.
its all a new firm trying to live of the jr brand...
i sold each and every bit of JR and went to jeti....
who are helpfull , open system meaning there is a lot of hardware sold. that is affordable..
also seen them (jr)on a fair in germany this year.... its dead.....
Last edited by digitech; 06-07-2018 at 06:48 AM.
#444
My Feedback: (61)
dont worry we had 3 x 28X
and where fubar....
hopeless updates , no help , no telemetric no SDK available.....
no answers....
considering we all where JR men from the start...
we have taken 4500 euros loss and never looked back...
i have seen and tried the newer "JR"servo,s.
its all a new firm trying to live of the jr brand...
i sold each and every bit of JR and went to jeti....
who are helpfull , open system meaning there is a lot of hardware sold. that is affordable..
also seen them on a fair in germany this year.... its dead.....
and where fubar....
hopeless updates , no help , no telemetric no SDK available.....
no answers....
considering we all where JR men from the start...
we have taken 4500 euros loss and never looked back...
i have seen and tried the newer "JR"servo,s.
its all a new firm trying to live of the jr brand...
i sold each and every bit of JR and went to jeti....
who are helpfull , open system meaning there is a lot of hardware sold. that is affordable..
also seen them on a fair in germany this year.... its dead.....