** TTU Telemetric Turbine Unit " for JETI
#30
Thread Starter
My Feedback: (10)
we support :
Jetcat
Evojet
Projet
Hammer engines
Wren
Xicoy all versions (V6 & V10)
Kingtech all versions (V1 & V2)
Digitech (Fadec)
Lambert FADEC & Xicoy)
and many more.
most of the turbines out there use one of these systems
All of these wil have Status output messaging,
if you are a LUA developer we can supply you with the Config files. just contact me at [email protected]
he TTU has a Speed sensor (staticDynamic) on board to measure speed.
you can imagine the possibilities like cruise control.
or setting min airspeeds for landing .
we expect to have all ready by the end of may.
check here for screen shots of a LUA app also supporting our TTU.
https://github.com/thomasekdahlN/jeti
the unit will ONLY work with Jeti TX.
Paramaters shown in Sensors :
Fuel %
EGT
Pump Voltage
Throttle %
RPM
RPM2
Speed
Status messaging (Lua)
Jeti box Full Display mode
Jetcat
Evojet
Projet
Hammer engines
Wren
Xicoy all versions (V6 & V10)
Kingtech all versions (V1 & V2)
Digitech (Fadec)
Lambert FADEC & Xicoy)
and many more.
most of the turbines out there use one of these systems
All of these wil have Status output messaging,
if you are a LUA developer we can supply you with the Config files. just contact me at [email protected]
he TTU has a Speed sensor (staticDynamic) on board to measure speed.
you can imagine the possibilities like cruise control.
or setting min airspeeds for landing .
we expect to have all ready by the end of may.
check here for screen shots of a LUA app also supporting our TTU.
https://github.com/thomasekdahlN/jeti
the unit will ONLY work with Jeti TX.
Paramaters shown in Sensors :
Fuel %
EGT
Pump Voltage
Throttle %
RPM
RPM2
Speed
Status messaging (Lua)
Jeti box Full Display mode
#32
Thread Starter
My Feedback: (10)
More news :
the TTU got a upgrade..
its now working in EX mode only.
this means we added a Switch to reset the fuel counter to 0 for people who have a top up tank.
Works on all brands exept : Jetcat and Projet ECU.
because these have their own fuel counters buld inside.
the TTU calcualtes itself on all other ECU.
the TTU got a upgrade..
its now working in EX mode only.
this means we added a Switch to reset the fuel counter to 0 for people who have a top up tank.
Works on all brands exept : Jetcat and Projet ECU.
because these have their own fuel counters buld inside.
the TTU calcualtes itself on all other ECU.
#34
My Feedback: (7)
More news :
the TTU got a upgrade..
its now working in EX mode only.
this means we added a Switch to reset the fuel counter to 0 for people who have a top up tank.
Works on all brands exept : Jetcat and Projet ECU.
because these have their own fuel counters buld inside.
the TTU calcualtes itself on all other ECU.
the TTU got a upgrade..
its now working in EX mode only.
this means we added a Switch to reset the fuel counter to 0 for people who have a top up tank.
Works on all brands exept : Jetcat and Projet ECU.
because these have their own fuel counters buld inside.
the TTU calcualtes itself on all other ECU.
#40
#45
My Feedback: (53)
DC-24 LUA show up but it doesn't show any RPM when I cool/turn the motor, also can't connect on the jeti box to adjust the parameter like Turbine type ect....maybe mine's need updating already????
Note, this is a new installation and I haven't started the motor yet.....I'm still waiting for the fuel tank.
Note, this is a new installation and I haven't started the motor yet.....I'm still waiting for the fuel tank.
#46
My Feedback: (7)
DC-24 LUA show up but it doesn't show any RPM when I cool/turn the motor, also can't connect on the jeti box to adjust the parameter like Turbine type ect....maybe mine's need updating already????
Note, this is a new installation and I haven't started the motor yet.....I'm still waiting for the fuel tank.
Note, this is a new installation and I haven't started the motor yet.....I'm still waiting for the fuel tank.
#48
Thread Starter
My Feedback: (10)
DC-24 LUA show up but it doesn't show any RPM when I cool/turn the motor, also can't connect on the jeti box to adjust the parameter like Turbine type ect....maybe mine's need updating already????
Note, this is a new installation and I haven't started the motor yet.....I'm still waiting for the fuel tank.
Note, this is a new installation and I haven't started the motor yet.....I'm still waiting for the fuel tank.
connect your TTU directly to the EXT or EX port.
then go in sensor menu you should see there all the options and sensors.
if your turbine setting is wrong :
go in jetibox mode.
try eather jb1 or jb2
in mx go to the ttu (if you have the wrong turbine setting you see some jibberish data)
Press arrow down/arrow up simultane
and you should be in the menu.
set all the parameters there.
#50
My Feedback: (53)
What I'm doing wrong....if anything??
connect your TTU directly to the EXT or EX port.
then go in sensor menu you should see there all the options and sensors.
if your turbine setting is wrong :
go in jetibox mode.
try eather jb1 or jb2
in mx go to the ttu (if you have the wrong turbine setting you see some jibberish data)
Press arrow down/arrow up simultane
and you should be in the menu.
set all the parameters there.
then go in sensor menu you should see there all the options and sensors.
if your turbine setting is wrong :
go in jetibox mode.
try eather jb1 or jb2
in mx go to the ttu (if you have the wrong turbine setting you see some jibberish data)
Press arrow down/arrow up simultane
and you should be in the menu.
set all the parameters there.
As for JB1/JB2 when I go Exbus sensor (where I assume the TTU is?).....it say "waiting for the device" so I realize its not connecting....the ECU (xicoy Kingtech G older) Blue light is on I can cool the motor so it turn...
Ok, when I go to sensor....I see the parameters like get rpm ect.... the lua app show OK, but I see no voltage or rpm if I motor the turbine also nothing about the eco OFF or ready..... So I'm not sure what I'm doing wrong or if the software because of the update on the TX is no longer compatible with the TTU??
The red light on the TTU is flashing rapidly so I know its power but there's a problem.....
Last edited by Dansy; 08-10-2017 at 03:13 PM. Reason: Red light added....