BVM wheels and brakes
#1
Thread Starter
BVM wheels and brakes
I am trying to source a set of BVM 3.5 inch wheels and brakes and a brake unit for a 3.5 inch wheel.
Has anyone such items they may care to sell ?
Has anyone such items they may care to sell ?
#3
Thread Starter
It seems your rudeness and Springs endorsement were , to say the least, inappropriate.
A good friend of many years is supplying the wheels and at a very good price. They are on the way, just perfect !
Perfect
A good friend of many years is supplying the wheels and at a very good price. They are on the way, just perfect !
Perfect
Last edited by David Gladwin; 01-09-2023 at 09:32 AM.
The following users liked this post:
blackcat (01-18-2023)
#5
Thread Starter
The wheels have arrived and since Don included spare tyres and O rings my damaged unit is now “S “ and reinstalled in my Rotkoski Sabre. This new set is ready to install in my refreshed Avonds F 15.
As an insurance against being unable to get replacement BVM wheels I ordered a set of Xicoy wheels with electric brakes. They have arrived, beautifully made and mine came with 5 mm shafts, almost same as BVM.
So, if you are stuck, these wheels may well be the answer !
Last edited by David Gladwin; 01-13-2023 at 06:03 AM.
#7
Thread Starter
Well, yet more changes !
I had an email from Gaspar this morning, various news !
Sadly , Xicoy will be withdrawing from wheel production to concentrate on engine production. A real shame with such high quality products and with BVM out of production, too.
The good news is that two new engines will be produced, a 66 a slightly enlarged and considerably more powerful version of the 45 and later this year a 225.
Having 5 of Gaspars engines, I am sure these new engines will be winners.
Plus ca change !
I had an email from Gaspar this morning, various news !
Sadly , Xicoy will be withdrawing from wheel production to concentrate on engine production. A real shame with such high quality products and with BVM out of production, too.
The good news is that two new engines will be produced, a 66 a slightly enlarged and considerably more powerful version of the 45 and later this year a 225.
Having 5 of Gaspars engines, I am sure these new engines will be winners.
Plus ca change !
#8
My Feedback: (2)
David;
I was not aware that Xicoy had it's own brand of wheels.
Does this mean that Electron is down-sizing/ closing, as all my retracts/ wheels/ brakes come from the Electron brand, which I understand is also owned by Gaspar?
Paul
Sadly , Xicoy will be withdrawing from wheel production to concentrate on engine production.
Does this mean that Electron is down-sizing/ closing, as all my retracts/ wheels/ brakes come from the Electron brand, which I understand is also owned by Gaspar?
Paul
#10
Electron is owned by Xoel Montenegro Dios--not Gaspar--and is not going anywhere, downsizing or closing. JAG RC is still the US importer.
Last edited by fmrsdtr; 01-16-2023 at 08:26 AM.
The following users liked this post:
fmrsdtr (01-16-2023)
#12
Thread Starter
Carlos, Perhaps you could show, explain, the installation, it sounds good.
I received another pair of BVM wheels, 3 1/4, from a friend yesterday, but they are not “braked”. Perhaps your idea could convert them !
otherwise they are just nosewheels, perfect scale for this Rotkoski Sabre on which the Sullivan wheel is just too small.
I received another pair of BVM wheels, 3 1/4, from a friend yesterday, but they are not “braked”. Perhaps your idea could convert them !
otherwise they are just nosewheels, perfect scale for this Rotkoski Sabre on which the Sullivan wheel is just too small.