new Arf Boomerang 14lb thrust
02-14-2011, 05:08 AM
#2651
RE: new Arf Boomerang 14lb thrust
Great, thanks! That just leaves red.
RC
EDIT: For anyone else searching this, here are the Ultracote colors I found that match:
Red: HANU866 True Red
White: HANU870 White
Blue: HANU885 Midnight Blue
Yellow: HANU884 Cub Yellow
RC
EDIT: For anyone else searching this, here are the Ultracote colors I found that match:
Red: HANU866 True Red
White: HANU870 White
Blue: HANU885 Midnight Blue
Yellow: HANU884 Cub Yellow
02-28-2011, 06:04 PM
#2652
RE: new Arf Boomerang 14lb thrust
Would the JR Sport MN48 servo be acceptable as a steering servo?
http://www.horizonhobby.com/Products...rodId=JSP20040
http://www.horizonhobby.com/Products...rodId=JSP20040
08-02-2016, 08:48 AM
#2655
My Feedback: (30)
Join Date: Mar 2010
Location: Norfolk, NE
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Is there anyone who could give me the strut lengths for the intro? I've been talking to Spring Air and I like his retracts and he also has trailing link struts. I looked at the dreamworks gear and the strut length they gave me for the nose seemed way to short. Any help would be greatly appreciated especially is you are using trailing link gear. Thanks in advance.
Jason
Jason
08-08-2016, 08:52 AM
#2658
Is there anyone who could give me the strut lengths for the intro? I've been talking to Spring Air and I like his retracts and he also has trailing link struts. I looked at the dreamworks gear and the strut length they gave me for the nose seemed way to short. Any help would be greatly appreciated especially is you are using trailing link gear. Thanks in advance.
Jason
Jason
Jason,
Be very confident with the struts from Dreamworks. They are the best in the market and all of my Boomerang Jets have used their struts. They can take the punishment on and off grass fields, and their customer service is the best in the business!!!
08-08-2016, 05:29 PM
#2659
My Feedback: (30)
Join Date: Mar 2010
Location: Norfolk, NE
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
I don't doubt the quality of Dreamworks retracts, but the Intro was designed for a firewall mounted nose wheel retract. That is why I am trying to find a set of trailing link that will work in the Spring Air retract units since they have a set that is made for firewall mounting. I just need the lengths of the struts.
Jason
Jason
08-10-2016, 09:10 AM
#2661
My Feedback: (30)
Join Date: Mar 2010
Location: Norfolk, NE
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Thanks extra. The difference is mine nose gear is set up for firewall mount and not rail mounted like yours. So my nose wheel actually will retract forward instead of to the rear.
02-28-2020, 12:23 PM
#2662
Join Date: Sep 2009
Location: Nantes, FRANCE
Posts: 110
Likes: 0
Received 0 Likes
on
0 Posts
Anyone got any idea of aerofoil used on intro looks like a naca 0018 also anyone got any pics of makeup of wing or still has broken wing that can see inside.
I picked up a damaged intro second hand fuse and centre section is ok apart from some nose damage, but missing one wing so I was going to build one, can get rough idea from good one I have but not sure make up forward of spars, looks fairly standard just wanted to make sure before I start, also if could get profile would save a lot of work making ribs
I picked up a damaged intro second hand fuse and centre section is ok apart from some nose damage, but missing one wing so I was going to build one, can get rough idea from good one I have but not sure make up forward of spars, looks fairly standard just wanted to make sure before I start, also if could get profile would save a lot of work making ribs
