Heer

Hi
I own a RAM 500 with ProJet-ECU within is possible to calibarte acceleration in 4 steps from idle (50 k) to full-throttle (150 k).

My question is: who knows shortest time over the hole acceleration from idle to full.

Thanks in advance for help.

F. Heer
www.jetmodel.ch

Brian B

My Feedback: (5)

It has been a while since I ran mine, but the acceleration time from idle to full throttle is not very fast, maybe 4 seconds or so.

diceman

My Feedback: (10)

Most micro turbines spool up from about 30 - 40% throttle to 100% very fast. Coming from idle to full throttle is almost always pretty slow. It's the first little bit that is the slowest part of the curve.

cohetin

My Feedback: (19)

normally from idle to full power in the real turbine engine is 5 to 6 second.and from full power to idle is 6 to 8 second for avoid stall and flame out.

Shok

My Feedback: (28)

48k going up to 149k on my T-500 takes 6 seconds

JohnVH

My Feedback: (38)

Not sure on time, but can tell you that my T500 throttle responce blows away my P80!