spaceman 01

My Feedback: (44)

Thank you Craig and Levi. Here are some pictures of the progress like the top intakes which they were wrong and so on .....

Ro

any unstarted kits for sale?

Craig B.

Hey Ro,

you are are still around!

Good progress spaceman, keep the photos coming

DrScoles

My Feedback: (18)

Designed this today for one of my friends. Craig, I'll put a few in the mail for you with the HUD once we get the size dialed.

spaceman 01

My Feedback: (44)

Today I got some time to work on the Mig 29 I cut open the inlets and install the screens and then I will cover it with 1/64 lead sheets ,after that I will detail the doors. This also will give it some weight so they will close when it's not in-flight I don't use the hydraulic on the inlet doors they are just by gravity.

loucel-RCU

My Feedback: (57)

CraigB
any chance you can measure where you installed the rudder servos, I would like do the same modification, having trouble with the cable set up, per the instructions, rudders not centering

thanks

spaceman 01

My Feedback: (44)

Hi to all,
The weekend was here and some time to work on the Mig 29 I just finished the on/off fuel valves controled by a manual push pull system and close to the engines which they are operated from the service panel. I have also finished the lineup for the engines , pumps and ECUs will be next until next time I'll see you all

Craig B.

Sure can. Will get them out and measure it up and post it here for you.

jacksonretlaw-RCU

My Feedback: (16)

Hey nick.this is walter.how r you doing.had stroke back in,08-19-15.still trying to recover.lost use right side.i need you to measure wingtubes.thankyou.

spaceman 01

My Feedback: (44)

Hi Walter, I hope you get well and is nice to hear from you . What measure do you want ? length or diameter . I am doing the wing with one bolt in the wheel well to hold them on. I will post later with pictures.

jacksonretlaw-RCU

My Feedback: (16)

Both..dont have.i will make with carbon rob.thanx

spaceman 01

My Feedback: (44)

I will post it when next time, keep an eye .

Craig B.

Hi Mike,

sorry, I missed your post. That looks awesome mate! Well done! Would love a set. Thank you very much.

spaceman 01

My Feedback: (44)

Hello there, I was testing my hydraulic system and unfortunately the The pressure board or ECU does not work if anyone has one spare and they can spare it,I would appreciate it here's the picture of which part I'm looking for,thank you Nick.
I tried emailing to hausl in Germany but there is no answer back .

TSHARK203

My Feedback: (206)

Anyone out there got a set of Glennis wheels they want to let go of?

loucel-RCU

My Feedback: (57)

CraigB

Thanks!

MaHo

I have some for you. Send a PM.
Regards Martin

Paul Buckrell

My Feedback: (2)

The Hausl business is now Modell Technik Hausl, Weyerngasse 41, 8720 Apfelberg, Austria, www.modelltechnik.at Email: [email protected] I'm about to buy their hydraulic system and valves for my MiG-29. The units are only made to order and delivery ex-factory is 3 weeks after receipt of order. The HPU10 pressure unit is EUR 365 and the V4/2N2 valves are EUR 48 each.

TSHARK203

My Feedback: (206)

Does any one have the template/diagram for the cutout of the turkey feathers for the mig. As well as the shroud for the top of the nozzels. I need to cut some litho plate.

TSHARK203

My Feedback: (206)

Also looking for a droug chute and tube if anyone has one. Or really if you have a wrecked bird lying about it could use a few parts. PM me or email me at [email protected]
There are several parts I'm looking for that I could use to complete mine.

David Gladwin

I have a set of complete main wheels and brakes, unused. PM if interested

spaceman 01

My Feedback: (44)

hello David, How much for the wheels?

spaceman 01

My Feedback: (44)

TSHArK203 for the feather turkey I just eyeballed it a quick measurements on the distance between the support for the pipe and just cut the ends and use a pair of pliers to make it rough at the ends look at the pictures I also went down to Menards and got a graphite paint spray for high heat and I shut it a few times,I think it looks OK

David Gladwin

These are big wheels and brakes in as new condition.They were NOT cheap.
So, 200 us d for the pair (cheaper than a set of wheels for my BVM F4!)
David.

TSHARK203

My Feedback: (206)

Hey David I sent you a pm the other day. Did you get it?