Fei Bao Mirage 2000
#176
Member
Join Date: Oct 2013
Location: Brussels, Belgium
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Same as Peter, CG with UAT full and empty tanks. I'm using the pneumatic gear with jet tronics valve and 2 air tanks in // at 7 bars (105 PSI). I also do need to slow down the speed to retract the main gear successfully. Was using an electrical landing gear from Lado originally but had too many issues with it so I decided to go back to pressure !
Weight is 18.7 kg dry with batteries, cockpit, pilot and ordinance (as shown on pictures). CG is 436mm from the leading edge.
Weight is 18.7 kg dry with batteries, cockpit, pilot and ordinance (as shown on pictures). CG is 436mm from the leading edge.
#182
thank you, I think the model has evolved based on input from this forum. The cylinders for the main doors are now better leveraged to assist with open and close. The mains seem to function very well with the small air lines, so hopefully the issue with them not retracting in flight and requiring a high pressure system has gone away
the air-x construction and the CF formers are top notch. pretty happy with the fit an finish and construction, can't wait to get this one done.
This will be my 3rd mirage, but 1st from Fei Bao, i love the way the mirage flys and hopefully this one won't let me down either, 25lbs +/- no radio or turbine
the air-x construction and the CF formers are top notch. pretty happy with the fit an finish and construction, can't wait to get this one done.
This will be my 3rd mirage, but 1st from Fei Bao, i love the way the mirage flys and hopefully this one won't let me down either, 25lbs +/- no radio or turbine
#183
Member
Join Date: Oct 2013
Location: Brussels, Belgium
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
A new video from this weekend. I have optimized the CoG but replacing the forward tank by a cylindric tank sitting on top of the 2 side tanks. The CoG does not move anymore whether dry or full during flight. No jump at take off anymore and smooth landing. Use the CG balancer from Xicoy, great tool.
https://www.youtube.com/watch?v=ueBPgnsqtCA#t=350
https://www.youtube.com/watch?v=ueBPgnsqtCA#t=350
https://www.youtube.com/watch?v=ueBPgnsqtCA#t=350
https://www.youtube.com/watch?v=ueBPgnsqtCA#t=350
#187
Member
Join Date: Oct 2013
Location: Brussels, Belgium
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
It is a custom made tank to fit underneath the engine bay hatch, the company name is fctjet based in UK. It has a capacity of 1,4 liters, I'm carrying 3,9 liters in total.
#188
gents started my build, doing radio gear and air line work first. I ordered a custom tank from Jet tech to duplicate what RS did. I noticed some of you have a by-pass one was not include with mine and was told it was not needed with the bell mouth pipe is that true?
#190
Member
Join Date: Oct 2013
Location: Brussels, Belgium
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
Did not use the bypass and pipe delivered with the kit, see post #141 and the discussion around. Had to increase the pipe diameter to accommodate the 200N turbine, the original one is designed for 160N turbine.
#191
thank you all, I got a larger pipe for the larger turbine, so I'm good.
I'm going to pint the FG tail cone and areas inside the fuse around the rear of the turbine with the BVM ceramic paint to be safe.
I'm going to pint the FG tail cone and areas inside the fuse around the rear of the turbine with the BVM ceramic paint to be safe.
#193
wings done, need more airlines but build is going quick. got slats on flap switch, all adjusted and balanced with DX-18.... easy.
note cool air couplings form dreamworks up to 6 air lines 1 connection.
note cool air couplings form dreamworks up to 6 air lines 1 connection.
#194
Member
Join Date: Oct 2013
Location: Brussels, Belgium
Posts: 73
Likes: 0
Received 0 Likes
on
0 Posts
#196
made a mount for the tank (nice and snug) and put all the connection points (even though tight) per the manual so i don't have to remove the cockpit to access key items. I will put fuel fill to access from main hatch as well.
#199
started bench testing this week everything working well had a very slow air leak came to find out the FB valves had a slow leak, probably good for maiden. put in much better quality fitting on the tanks and will start tubing. couple of questions for builders.
1. this is my 3rd mirage, 1st FB. neutral flight always needed a bit of up. at the fuse where does your elevon sit (roughly).
2. duct to turbine, the tanks make it hard to fit in. wow much of a gap in front of the turbine would you guys recommend.
3.
1. this is my 3rd mirage, 1st FB. neutral flight always needed a bit of up. at the fuse where does your elevon sit (roughly).
2. duct to turbine, the tanks make it hard to fit in. wow much of a gap in front of the turbine would you guys recommend.
3.
#200
My Feedback: (44)
Join Date: Sep 2004
Location: Wilmette,
IL
Posts: 439
Likes: 0
Received 0 Likes
on
0 Posts
Are your main fuel tanks original or you replaced them?
over the weekend my tanks got an other hole again and flooded the engine and fuselage whale I was refueling . I am getting pin holes constantly . I am tired repairing them.
Is any one out there with replacement tanks or plastic type.
thanks ,
Nick
over the weekend my tanks got an other hole again and flooded the engine and fuselage whale I was refueling . I am getting pin holes constantly . I am tired repairing them.
Is any one out there with replacement tanks or plastic type.
thanks ,
Nick