PST Reaction ARF Directive - Flight Controls Seams
#1
Senior Member
Thread Starter
Join Date: Jul 2002
Location: Bangkok, THAILAND
Posts: 726
Likes: 0
Received 0 Likes
on
0 Posts
PST Reaction ARF Directive - Flight Controls Seams
We have found separation of elevator lower skin on one of our demo Reaction ARF. This demo Reaction is powered by 16Kgs engine which is way out of the recommended engine class. Neverhteless, we ask that all Reaction ARF owners to take a look and follow the instruction listed at the following link before their next flight.
All new Reaction ARF will have these area reinforced from the factory.
http://www.rcuniverse.com/forum/m_86...tm.htm#8606378
Thanks and regards,
Kraivuth S.
PST Jets
All new Reaction ARF will have these area reinforced from the factory.
http://www.rcuniverse.com/forum/m_86...tm.htm#8606378
Thanks and regards,
Kraivuth S.
PST Jets
#2
My Feedback: (1)
Join Date: Dec 2001
Location: Bangkok, THAILAND
Posts: 483
Likes: 0
Received 0 Likes
on
0 Posts
RE: PST Reaction ARF Directive - Flight Controls Seams
Kraivuth's post points to the link with photos of various joints. If there are any questions please contact the PST factory at the website e mail.