SWIWIN turbine telemetry adapter from VSpeak
#1
Thread Starter
Join Date: Aug 2018
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
SWIWIN turbine telemetry adapter from VSpeak
Hi,
now is also a telemetry adapter for SWIWIN turbines available from VSpeak (supported ECU: V3)
The converter transmits the turbine data, has a fuel consumption calculation and the taxi tank option.
The following remote control systems are supported, the respective RC system can be set:
(... demo videos for the other RC systems you will find: Swiwin - VSpeak Modell)
now is also a telemetry adapter for SWIWIN turbines available from VSpeak (supported ECU: V3)
The converter transmits the turbine data, has a fuel consumption calculation and the taxi tank option.
The following remote control systems are supported, the respective RC system can be set:
- PowerBox Core P²-Bus
- Jeti Duplex EX
- Multiplex MLink (MSB)
- Graupner HoTT
- Futaba (single Sensors and JetCatV10 display)
- FrSky S.Port
- JR PROPO
- Spektrum (X-Bus)
The following users liked this post:
AEROSHELDON (11-05-2020)
#9
Thread Starter
Join Date: Aug 2018
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
- FUEL level
- Status (using the JetCatV10 display on your Futaba radio .... else coded as amps value)
#10
Thread Starter
Join Date: Aug 2018
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
The current flow rate is also displayed in ml / min.
Youtube:
Last edited by start_zero; 11-14-2020 at 09:15 AM.