SM 2M Viperjet pipe diameter please.
#2
Senior Member
Join Date: Nov 2008
Location: Coventry, UNITED KINGDOM
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
RE: SM 2M Viperjet pipe diameter please.
I measured mine in metric, sorry !
Dual walled pipe, tapered
Inner ID 85mm at front
Inner ID 70mm at rear
Inner wall thickness 1mm
Outer OD 100mm at front
Outer OD 85mm at rear
Outer wall thickness 0.05mm
Length inner 590mm
Length outer 562mm
Inner pipe is recessed from outer at the rear by 10mm
Bellmouth ID 83.8mm
Bellmouth OD 112mm
Bellmouth depth 28mm
Total length with Bellmouth pushed home 610mm
My kit is a version 2 delivered a couple of months ago, early versions may differ.
Dual walled pipe, tapered
Inner ID 85mm at front
Inner ID 70mm at rear
Inner wall thickness 1mm
Outer OD 100mm at front
Outer OD 85mm at rear
Outer wall thickness 0.05mm
Length inner 590mm
Length outer 562mm
Inner pipe is recessed from outer at the rear by 10mm
Bellmouth ID 83.8mm
Bellmouth OD 112mm
Bellmouth depth 28mm
Total length with Bellmouth pushed home 610mm
My kit is a version 2 delivered a couple of months ago, early versions may differ.
#3
Thread Starter
My Feedback: (31)
RE: SM 2M Viperjet pipe diameter please.
Thanks...much appreciated.
The inner and outer pipes should not be flush at the rear of the pipe. The inner should be shorter than the outer for cooling. U might wanna check with SM about this...none of my other SM pipes were ever flush at the exit. Sounds like u got a bad pipe.
The inner and outer pipes should not be flush at the rear of the pipe. The inner should be shorter than the outer for cooling. U might wanna check with SM about this...none of my other SM pipes were ever flush at the exit. Sounds like u got a bad pipe.
#4
Senior Member
Join Date: Nov 2008
Location: Coventry, UNITED KINGDOM
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
RE: SM 2M Viperjet pipe diameter please.
Oops, my mistake, blind old git.
You are right, the inner pipe is recessed at the rear by 10mm
I've edited my original post to reflect this.
You are right, the inner pipe is recessed at the rear by 10mm
I've edited my original post to reflect this.
#6
My Feedback: (44)
RE: SM 2M Viperjet pipe diameter please.
ORIGINAL: Couch Potato
I measured mine in metric, sorry !
Dual walled pipe, tapered
Inner ID 85mm at front
Inner ID 70mm at rear
Inner wall thickness 1mm
Outer OD 100mm at front
Outer OD 85mm at rear
Outer wall thickness 0.05mm
Length inner 590mm
Length outer 562mm
Inner pipe is recessed from outer at the rear by 10mm
Bellmouth ID 83.8mm
Bellmouth OD 112mm
Bellmouth depth 28mm
Total length with Bellmouth pushed home 610mm
My kit is a version 2 delivered a couple of months ago, early versions may differ.
I measured mine in metric, sorry !
Dual walled pipe, tapered
Inner ID 85mm at front
Inner ID 70mm at rear
Inner wall thickness 1mm
Outer OD 100mm at front
Outer OD 85mm at rear
Outer wall thickness 0.05mm
Length inner 590mm
Length outer 562mm
Inner pipe is recessed from outer at the rear by 10mm
Bellmouth ID 83.8mm
Bellmouth OD 112mm
Bellmouth depth 28mm
Total length with Bellmouth pushed home 610mm
My kit is a version 2 delivered a couple of months ago, early versions may differ.
Dual walled pipe, tapered
Inner ID 85mm (3.34”) at front
Inner ID 70mm (2.75” ) at rear
Inner wall thickness 1mm (0.039”)
Outer OD 100mm (3.84”) at front
Outer OD 85mm (3.34”) at rear
Outer wall thickness 0.05mm (0.0019”)
Length inner 590mm (23.2”)
Length outer 562mm (22.12”)
Inner pipe is recessed from outer at the rear by 10mm (.394”)
Bellmouth ID 83.8mm (3.3”)
Bellmouth OD 112mm (4.4”)
Bellmouth depth 28mm (1.1”)
Total length with Bellmouth pushed home 610mm (24”)
#7
Senior Member
Join Date: Nov 2008
Location: Coventry, UNITED KINGDOM
Posts: 1,015
Likes: 0
Received 0 Likes
on
0 Posts
RE: SM 2M Viperjet pipe diameter please.
ORIGINAL: RCISFUN
For those who like inches
For those who like inches
No wonder your B2 is 2.54 x bigger than it should be.
#9
My Feedback: (4)
RE: SM 2M Viperjet pipe diameter please.
ORIGINAL: RCISFUN
As so not to disappoint....
ORIGINAL: Couch Potato
Oh no, you'll be quoting fractions next like 13/64''
No wonder your B2 is 2.54 x bigger than it should be.
ORIGINAL: RCISFUN
For those who like inches
For those who like inches
No wonder your B2 is 2.54 x bigger than it should be.
Cheers,
Jim