RE: C-ARF Ultra Flash build Thread + Video
Thank you dave<div>
</div><div>landing long l enjoyed the flight. l did not want to land;);)</div> |
RE: C-ARF Ultra Flash build Thread + Video
1 Attachment(s)
Getting close to finishing Pinky. Should be fun with a P180RX.
|
RE: C-ARF Ultra Flash build Thread + Video
Nice look'n bird Andrew, who did the flowing paint work ?
|
RE: C-ARF Ultra Flash build Thread + Video
Who's using FOD screens inside their bypass? Seeing much thrust reduction?
|
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: scoeroo Nice look'n bird Andrew, who did the flowing paint work ? |
RE: C-ARF Ultra Flash build Thread + Video
Most of the models now have the fuse de seamed, this one started it ;)
The Black Hawk I had in last week was also de seamed and it will be the case on std schemes where possible to do it Dw |
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: Dave Wilshere Most of the models now have the fuse de seamed, this one started it ;) Dw |
RE: C-ARF Ultra Flash build Thread + Video
i hope my new ultra lightning will be seamless...:D
|
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: Andrew Bird Getting close to finishing Pinky. Should be fun with a P180RX. I can't imagine what a 180 would be like in this bird. Paul. |
RE: C-ARF Ultra Flash build Thread + Video
1 Attachment(s)
Can someone tell me what's this gray paint guys are finishing their interior with? Looks really nice, & I'd like to find some
|
RE: C-ARF Ultra Flash build Thread + Video
1 Attachment(s)
Can someone tell me what's this gray paint guys are finishing their interior with? Looks really nice, & I'd like to find some
|
RE: C-ARF Ultra Flash build Thread + Video
Grey primer with a dusting of "Stone" finnish paint.
|
RE: C-ARF Ultra Flash build Thread + Video
Thanks, got it!
|
RE: C-ARF Ultra Flash build Thread + Video
i use the valspar textured paint...you can get it anywhere...wallmart ,home depot....really finishes it off nice....pat
|
RE: C-ARF Ultra Flash build Thread + Video
Hey Pat, I'm guessing you get the spray can version?
|
RE: C-ARF Ultra Flash build Thread + Video
yes i do...i just wipe out the inside with some windex to remove any dust ...just make sure the temp where your painting is about 60 degress or more...spray thin coats...you may need 3 or so...now it will take about a day or so to dry so be patient...you will be surprised how easy this paint works...i just painted a new comp arf yak interior with it...looks awesome...pat
|
RE: C-ARF Ultra Flash build Thread + Video
Thanks Pat, I'll swing by lowes
|
RE: C-ARF Ultra Flash build Thread + Video
anytime...so your going with a jetcat 140rx...?
|
RE: C-ARF Ultra Flash build Thread + Video
I think I'm going to install my new P-100rx since I have it, then I'll get the 140 or something bigger down the line. Did you happen to use the Behotec retract/brake valve? I still need to figure how to make my 14mz control that combo valve with the 2pos switch & the side slider...
|
RE: C-ARF Ultra Flash build Thread + Video
love the jetcat engines:D
|
RE: C-ARF Ultra Flash build Thread + Video
Weve used the same textured paint BlueBus in our Ultra Flash, but when I did the re - install on our Classic Flash, I used a standard coat of Primer but then lowered the Gun Pressure so it was little more than spitting the paint onto the the internals (Black and then White) giving the same effect as the Textured product but its alot lighter, the textured version is the fast way of applying the same thing, but our Ultra worked out slightly heavier.
Just thought itd be worth knowing before you started. Hope this helps. |
RE: C-ARF Ultra Flash build Thread + Video
Thanks Jaime, I plan on using spray cans & probably a brush to get the hard to reach crevices (no comp/gun available), So I'm going to have to stick with a textured product to get it done.
|
RE: C-ARF Ultra Flash build Thread + Video
No worries, I would've thought you'd probably be just fine with spray cans to get into all the awkward areas, its surprising just where it gets once you start :eek:
|
RE: C-ARF Ultra Flash build Thread + Video
.
|
RE: C-ARF Ultra Flash build Thread + Video
ORIGINAL: basimpsn . |
All times are GMT -8. The time now is 12:33 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.