RCU Forums

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Fly Eagle 1/6 scale F-16 Build Thread (https://www.rcuniverse.com/forum/rc-jets-120/10589011-fly-eagle-1-6-scale-f-16-build-thread.html)

acabrera11 11-27-2015 08:22 PM

Hello, any flaps set Up for TOF and Lnd?

FenderBean 11-27-2015 08:58 PM


Originally Posted by acabrera11 (Post 12133400)
Hello, any flaps set Up for TOF and Lnd?

no flaps, I mixed in some flaps for landing once but the jet would not come down so I took them back out.

acabrera11 12-18-2015 07:21 AM

Thanks Fender, have one more, I'm ready for maiden, but I notice that the main LG are too weak and too low, againts nose that is fully extended, so, there is any form to graduate the struts force?

FenderBean 12-18-2015 08:44 AM


Originally Posted by acabrera11 (Post 12144494)
Thanks Fender, have one more, I'm ready for maiden, but I notice that the main LG are too weak and too low, againts nose that is fully extended, so, there is any form to graduate the struts force?

I dont think I understand, are you asking if the strut can be made to hold more weight before it strokes? My gear needed some air added to the struts.

acabrera11 12-18-2015 09:29 PM

Yes, the Plane is too much nose high on ground, where you charge Air to struts?

FenderBean 12-19-2015 07:58 AM

My gear had a small fill port at the top of the strut, it has a check valve in that took about 120 psi to push air by to add some to the strut.

scaryxxl 08-09-2019 06:42 AM

Hi all!
I need the manual of the f16 1/6. where can I get it? ? Flyeagle jet never answer emails!

FenderBean 08-09-2019 10:16 AM

If you look back through the thread and videos you may find the cg I used and the throws. Cheers!


All times are GMT -8. The time now is 07:07 PM.


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.