RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Jets (http://www.rcuniverse.com/forum/rc-jets-120/)
-   -   ballcock options?? (http://www.rcuniverse.com/forum/rc-jets-120/11173428-ballcock-options.html)

Quandry 07-29-2012 10:52 AM

ballcock options??
 
Hi All,

I have a Habu 32 with P20 conversion. The fuel system is running 3mm festo and I would like to install a ballcock valve in between the fuel pump and tank - to isolate the pump when fueling the tank. It seems though that the smallest Festo ball cock is 4mm.

Does anyone know if a 3mm ballcock is available? another option would be to install a 3 to 4mm step connector on either side of the valve, or maybe change the tank to pump line to 4mm?

Appreciate opinions on this.

cheers

siclick33 07-29-2012 11:05 AM

RE: ballcock options??
 
1 Attachment(s)
The easiest way is to use one of these in each end of the Festo valve.

TimWatson 07-29-2012 11:25 AM

RE: ballcock options??
 
1 Attachment(s)


That all creates quite a big installation in a small airframe. Why just not use a pipe clamping device on the tygon. Very cheap, light and works well. I use them in all my planes

</p>

indubitably 07-29-2012 07:26 PM

RE: ballcock options??
 
Where might they come from?

TimWatson 07-29-2012 10:14 PM

RE: ballcock options??
 

Quote:

ORIGINAL: indubitably

Where might they come from?

http://www.hobbyking.com/hobbyking/s...dProduct=12235

3d flip 07-30-2012 05:46 AM

RE: ballcock options??
 
1 Attachment(s)
Hi,

I used a 4mm pipe & 4mm festo valve from the UAT to the pump.


All times are GMT -8. The time now is 12:25 AM.