RCU Forums

RCU Forums (http://www.rcuniverse.com/forum/)
-   RC Jets (http://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Wanted, nose pin (http://www.rcuniverse.com/forum/rc-jets-120/11186136-wanted-nose-pin.html)

rcpete347 08-08-2012 03:35 PM

Wanted, nose pin
 
1 Attachment(s)
HI all, looking for a supplier of, I think the nose strut is Skymaster, a 6mm pin as in my pic.
Thanks Rcpete

k_sonn 08-08-2012 03:38 PM

RE: Wanted, nose pin
 
Check with BVM. They have a pin upgrade for the nose gear of the Skymaster L-39. Not sure of the size though.

http://shopbvmjets.com/zencart/index...roducts_id=549

Kirk

ozief16 08-08-2012 03:47 PM

RE: Wanted, nose pin
 
Pete,

I had the same pin bend rather than break on mine. What I did was to buy some 6mm drill stock at a local supplier. I then cut it and milled a groove for the e-clip with a dremel and a cut-off wheel. Problem solved! That was a cheap and easy solution

Dave

Xairflyer 08-08-2012 04:18 PM

RE: Wanted, nose pin
 
There was a similar thread some time ago, there was a few good links to alternative suppliers

John Tancock 08-08-2012 04:36 PM

RE: Wanted, nose pin
 
Funny that,
I've just made some 7mm pins for someone who has gone through same thing!a:eek:

Since increasing the diameter, there has been no more problems.

Obviously you have to open up the bush hole or remake it.




JT

topgun24 08-08-2012 04:41 PM

RE: Wanted, nose pin
 
BVM has good ones. Every time i had them made the metal use was to soft and they bent even on good landings. The ones i got from BVM are perfect

rcpete347 08-08-2012 05:03 PM

RE: Wanted, nose pin
 
1 Attachment(s)
HI all, thanks for your replies, just bought some pins and mini gages from Mc Master Carr.
Rcpete
http://www.mcmaster.com/#atmospheric...gauges/=irlhsf
http://www.mcmaster.com/#headed-precision-pins/=irlilx


All times are GMT -8. The time now is 03:02 PM.