RCU Forums
Page 51 of 85
« First
41
49
50
51
52
53
61
Last »
Show 40 post(s) from this thread on one page

RCU Forums (https://www.rcuniverse.com/forum/)
-   RC Jets (https://www.rcuniverse.com/forum/rc-jets-120/)
-   -   Jeti DS-24 (https://www.rcuniverse.com/forum/rc-jets-120/11624694-jeti-ds-24-a.html)

Viper1GJ 04-12-2019 06:07 PM
Originally Posted by ZB (Post 12517699)

We have decided to start production with two kinds of new Central Boxes CB220, Standard type with poly-fuses and SHD type that has no fuses.

Zb/Jeti USA
ZB, will the CB 220 have additional receiver and EXT ports?
Gary

ZB 04-13-2019 05:16 AM
Originally Posted by Viper1GJ (Post 12517806)
ZB, will the CB 220 have additional receiver and EXT ports?
Gary
Yes same as CB200 now, with latest update you have 3x EXT ports.
Also new CB220 will do Ditex servos with telemetry same as Jeti REX receivers.

Zb/Jeti USA

FlorianDo 04-13-2019 07:48 AM
ZB,

Great news. thanks, hope the cb220 comes available in Europe soon.

Two Q´s:

1) Servo voltage/amps available as telemetry for standard servos, so no Ditex needed for that ?

2) As I have one project coming up with Ditex servos in it, does Ditex telemetry work regardless of the CB220 version (fused / non-fused) ?

Florian

roydefiant 04-13-2019 12:33 PM
Is the assist stand alone basically a JETI gyro?

Dansy 04-13-2019 12:36 PM
Originally Posted by roydefiant (Post 12517954)
Is the assist stand alone basically a JETI gyro?
its a Receiver same all of them PLUS the gyro side....it can be used with out the gyro enable if desired....

Viper1GJ 04-13-2019 05:31 PM
Originally Posted by ZB (Post 12517881)
Yes same as CB200 now, with latest update you have 3x EXT ports.
Also new CB220 will do Ditex servos with telemetry same as Jeti REX receivers.

Zb/Jeti USA
ZB,

So if I understand what your are saying is the only difference between the current CB200 and the new CB220 with poly fuses is that it has a high speed ext port and there are no more additional slots to plug in to? I was hoping to see some additional slots not just the software configured EXT slots.

Gary

Viper1GJ 04-13-2019 05:31 PM
Originally Posted by ZB (Post 12517881)
Yes same as CB200 now, with latest update you have 3x EXT ports.
Also new CB220 will do Ditex servos with telemetry same as Jeti REX receivers.

Zb/Jeti USA
ZB,

So if I understand what your are saying is the only difference between the current CB200 and the new CB220 with poly fuses is that it has a high speed ext port and there are no more additional slots to plug in to? I was hoping to see some additional slots not just the software configured EXT slots.

Gary

ZB 04-14-2019 06:26 AM
Originally Posted by FlorianDo (Post 12517900)
ZB,

Great news. thanks, hope the cb220 comes available in Europe soon.

Two Q´s:

1) Servo voltage/amps available as telemetry for standard servos, so no Ditex needed for that ?

2) As I have one project coming up with Ditex servos in it, does Ditex telemetry work regardless of the CB220 version (fused / non-fused) ?

Florian
1) Yes any servo, it will be simply another sensor in Jeti line. Finally simple way of measuring current for single servo.
Telemetry alarms, data logging like all other data streams.

2) Yes, CB220 w/fuse & no fuses are identical except single component.

Zb/Jeti USA

ZB 04-14-2019 06:30 AM
Originally Posted by roydefiant (Post 12517954)
Is the assist stand alone basically a JETI gyro?
Technically yes, but standalone gyro has its own advantages. Gyro and receivers can be mounted in different places.
You can keep receiver where it has the best reception and gyro where is suppose to be. Also no problems with FCC :) and lower price.

Zb/Jeti USA

ZB 04-14-2019 06:32 AM
Originally Posted by Viper1GJ (Post 12518009)
ZB,

So if I understand what your are saying is the only difference between the current CB200 and the new CB220 with poly fuses is that it has a high speed ext port and there are no more additional slots to plug in to? I was hoping to see some additional slots not just the software configured EXT slots.

Gary
Do not forget Ditex, also more memory and much better processor. Current CB200 is maxed out, for more features we need better hardware.

More ports = Central Box 300, June/July 2019

Zb/Jeti USA

FlorianDo 04-14-2019 08:08 AM
Originally Posted by ZB (Post 12518111)
1) Yes any servo, it will be simply another sensor in Jeti line. Finally simple way of measuring current for single servo.
Telemetry alarms, data logging like all other data streams.

2) Yes, CB220 w/fuse & no fuses are identical except single component.

Zb/Jeti USA
Thanks ZB!

Viper1GJ 04-14-2019 02:18 PM
Originally Posted by ZB (Post 12518115)

More ports = Central Box 300, June/July 2019

Zb/Jeti USA
OK, that sounds great. Looking forward to seeing info on CB 300.
Thanks, Gary

Viper1GJ 04-14-2019 02:20 PM
Originally Posted by ZB (Post 12518115)
More ports = Central Box 300, June/July 2019
Zb/Jeti USA
OK, looking forward to seeing info on the CB300 with additional ports.
Thanks,
Gary

ZB 04-18-2019 06:52 AM
1 Attachment(s)
Happy Easter from us.

Attachment 2263985

kirkj 04-20-2019 04:05 PM
How does one set up a DS-24 haptic (stick shaker) so that it shakes the stick(s) at the end of a timer countdown?
I cant seem to find it??

Viper1GJ 04-20-2019 04:13 PM
Originally Posted by kirkj (Post 12519596)
How does one set up a DS-24 haptic (stick shaker) so that it shakes the stick(s) at the end of a timer countdown?
I cant seem to find it??
On the same topic, how does one get rid of the stick shaker at the end of the count down timer. I can't find that either.
Thanks,
Gary

flyloose 04-20-2019 05:16 PM
I don’t have my transmitter in front of me but isn’t the haptic feedback in the alarms section? I have it setup to vibrate in conjunction with my aural call at a specific mAh value on my electric setups.

kirkj 04-20-2019 05:38 PM
Originally Posted by flyloose (Post 12519620)
I don’t have my transmitter in front of me but isn’t the haptic feedback in the alarms section? I have it setup to vibrate in conjunction with my aural call at a specific mAh value on my electric setups.
That section does turn it on for sensor alarms, but no option for timer finish like i am looking for.

LA jetguy 04-20-2019 10:29 PM
Originally Posted by kirkj (Post 12519596)
How does one set up a DS-24 haptic (stick shaker) so that it shakes the stick(s) at the end of a timer countdown?
I cant seem to find it??
Currently there is NO adjustment of the hepatic (sticker shaker) alarm for when the timer runs out. Hopefully in the next firmware we will be able to make adjustments.

David

wfield0455 04-21-2019 05:24 AM
It does it automatically when the timer expires if you have voice output selected. Also, if you want voice but NOT the stick shake when timer expires, you can edit timer.jsn file and edit out the stick shake command. IT will need to be re-edited following transmitter upgrades thought. Would be nice if Jeti added a check box for haptic feedback to the timer options though.

flyloose 04-21-2019 05:52 AM
Originally Posted by wfield0455 (Post 12519729)
It does it automatically when the timer expires if you have voice output selected.
Good to know. Still don't have fuel quantity telemetry on my jets so perhaps I'll put the haptic along with my timer alarm (just for fun)

kirkj 04-21-2019 12:49 PM
Originally Posted by wfield0455 (Post 12519729)
It does it automatically when the timer expires if you have voice output selected. Also, if you want voice but NOT the stick shake when timer expires, you can edit timer.jsn file and edit out the stick shake command. IT will need to be re-edited following transmitter upgrades thought. Would be nice if Jeti added a check box for haptic feedback to the timer options though.
Wayne, great to know... PM sent!

Viper1GJ 04-21-2019 03:26 PM
Originally Posted by wfield0455 (Post 12519729)
It does it automatically when the timer expires if you have voice output selected. Also, if you want voice but NOT the stick shake when timer expires, you can edit timer.jsn file and edit out the stick shake command. IT will need to be re-edited following transmitter upgrades thought. Would be nice if Jeti added a check box for haptic feedback to the timer options though.
Wayne, thanks for the info. I'm gonna try to figure out how to remove the stick shaker from the timer.
Gary

OK found some timer jsn files. How do you edit them?

ZB 04-30-2019 07:58 AM
Something new is coming, the new Jeti MServo 30 current/voltage/amp sensor will be introduced at the Joe Nall 2019. From now on we will know Max, Average and Instant current load for individual servos.

Zb/Jeti USA

https://cimg3.ibsrv.net/gimg/www.rcu...db77c1ad8b.jpg
https://cimg4.ibsrv.net/gimg/www.rcu...3de66dd512.jpg
https://cimg6.ibsrv.net/gimg/www.rcu...bfa4363475.jpg

keweiliang 04-30-2019 11:49 PM
Originally Posted by ZB (Post 12522066)
Something new is coming, the new Jeti MServo 30 current/voltage/amp sensor will be introduced at the Joe Nall 2019. From now on we will know Max, Average and Instant current load for individual servos.

Zb/Jeti USA
Hi ZB，
I'm waiting for CB300. Is there anything new? Thank you
Best regards
William


All times are GMT -8. The time now is 03:00 PM.
Page 51 of 85
« First
41
49
50
51
52
53
61
Last »
Show 40 post(s) from this thread on one page


Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.