|
T-one model Big 3m T-3 Fortune &AirBeast Landing gear test fly
50 Attachment(s)
Hello everyone~
Very happy to share a new one 3 meter long Big sport jet T-one model's T-3 Fortune Because I am the design of the landing gear, I'm lucky to get a new improved version early, to facilitate my landing gear and structural testing! The new version is different from the prototype of the Florida show! include , nose battery compartment, pipe length, fuel tank ....as shown in the photo~ T-one model Big T-3 Test: T-one model big fortune T-3(3m) & AirBeast landing gear This is design for T-one big fortune T-3 Features: 1. Pneumatic Retract!! 2.Can use air-pressure to set the shock absorber hard or soft without spring,superior damping design can fully absorb the impact of landing!! 3.Air disc brakes,very powerful! Test Fly Setting: 1.C.G. is 330mm 2.nose gear air-pressure: 15psi main gear air-pressure:60psi 3.KingTech K-210 4.Flap-70 deg(40-50%throttle,very slow ) Test Fly Video: Attachment 2218101 Attachment 2218103 Attachment 2218105 Attachment 2218107 Attachment 2218109 Attachment 2218110 Attachment 2218112 Attachment 2218113 Attachment 2218114 Attachment 2218115 Attachment 2218116 Attachment 2218117 Attachment 2218118 Attachment 2218119 Attachment 2218120 Attachment 2218121 Attachment 2218122 Attachment 2218123 Attachment 2218124 Attachment 2218125 Attachment 2218126 Attachment 2218127 Attachment 2218128 Attachment 2218129 Attachment 2218130 |
2 Attachment(s)
Looks like a nice jet. Here's a picture of my 4+ year old T-3......uh, I mean Futura. Seems like they could have a least come up with a different paint scheme for a "new" design.
|
Thanks for posting...mine should be next out of the molds so looking forward to receiving it soon!
How were the CG settings and throws? Did you make any changes after first flight? JS |
2 Attachment(s)
If you have the AirBeast gear... Reinforce the area around your pin. This is What happens if you don't. Thank goodness it was at an almost complete stop when it came apart. It looks like it is just pressed in and not welded or otherwise secured
|
Originally Posted by CraigG
(Post 12341033)
Looks like a nice jet. Here's a picture of my 4+ year old T-3......uh, I mean Futura. Seems like they could have a least come up with a different paint scheme for a "new" design.
|
That's off a T-3?? I don't think any customers have them yet, right?!?
JS
Originally Posted by Desertlakesflying
(Post 12341314)
If you have the AirBeast gear... Reinforce the area around your pin. This is What happens if you don't. Thank goodness it was at an almost complete stop when it came apart. It looks like it is just pressed in and not welded or otherwise secured
|
Is that a T-one mirage in the background?
|
4 Attachment(s)
Originally Posted by Desertlakesflying
(Post 12341317)
They actually look quite a bit different paint schemes aside...
|
Originally Posted by jsnipes
(Post 12341335)
That's off a T-3?? I don't think any customers have them yet, right?!?
JS Airbeast is sending me a new part that is supposed to be an upgrade. |
Originally Posted by CraigG
(Post 12341475)
Different scheme in this one. Still looks pretty similar to me.
The T-One/T-3/Mini T1 looks far better with much better lines. |
Okimo, do the gear have 3mm or 4mm airlines for up/down actuation? Starting to buy equipment for my T-3 and want to confirm. Thanks!
JS |
Sorry, but the T-1/T-3 looks nothing like the Futura canoe.
the T-1/T/3 is a beautyful plane! The nose is completely different, t-1 have no tailcone. The canopy on the Canoe is so long etc... |
Dear we don't change the CG
|
Originally Posted by jsnipes
(Post 12341534)
Okimo, do the gear have 3mm or 4mm airlines for up/down actuation? Starting to buy equipment for my T-3 and want to confirm. Thanks!
JS Can you speak more clearly? Thank you |
I was asking about the air line diameter used on the gear. My understanding now is that it is 3mm.
My airframe shipped this week so looking forward to receiving it! JS
Originally Posted by okimo
(Post 12345166)
I do not understand what you mean
Can you speak more clearly? Thank you |
Originally Posted by jsnipes
(Post 12345248)
I was asking about the air line diameter used on the gear. My understanding now is that it is 3mm.
My airframe shipped this week so looking forward to receiving it! JS The air-tube is I.D.:2mm O.D.:3mm on Gear The fixed seat is 3D -print seat It's great aircraft! Because T-3 gear is our designed the product(AirBeast ), If Installation or use of any problems Can ask us directly!Or you can get the latest news on our Facebook fans! |
Thanks, Okimo. Can't wait to get it!
JS |
| All times are GMT -8. The time now is 06:09 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.