Yes, templates will be standard parts of the wooden kit.
Mirce |
Hi all
I have received this kit and I can tell you the quality is excellent, email communication is excellent, the time it took to deliver was 8 days and photos are exactly the same as what I have received! Now onto building it!! Do not hesitate if your thinking of building this superb model.. |
Before elevator & rudder I almost cover all fuselage with 3 mm balsa.
Front fuselage part I show before... https://cimg1.ibsrv.net/gimg/www.rcu...f72d7382ee.jpg Rear fuselage part upper side... https://cimg2.ibsrv.net/gimg/www.rcu...2d0b9c529c.jpg https://cimg1.ibsrv.net/gimg/www.rcu...b52f5f5132.jpg https://cimg7.ibsrv.net/gimg/www.rcu...cc78f21ef0.jpg https://cimg9.ibsrv.net/gimg/www.rcu...be4527258b.jpg https://cimg8.ibsrv.net/gimg/www.rcu...bc6da3f338.jpg https://cimg0.ibsrv.net/gimg/www.rcu...a1faa44c1e.jpg https://cimg6.ibsrv.net/gimg/www.rcu...12f90815d3.jpg https://cimg4.ibsrv.net/gimg/www.rcu...e06dc2afcf.jpg https://cimg5.ibsrv.net/gimg/www.rcu...55ba13fc53.jpg https://cimg7.ibsrv.net/gimg/www.rcu...1ae69ff12c.jpg https://cimg8.ibsrv.net/gimg/www.rcu...0b5b953610.jpg https://cimg9.ibsrv.net/gimg/www.rcu...5891726325.jpg https://cimg0.ibsrv.net/gimg/www.rcu...acc7edca05.jpg Now I turn fuselage and cut support "legs"... https://cimg2.ibsrv.net/gimg/www.rcu...d36143e4ed.jpg https://cimg1.ibsrv.net/gimg/www.rcu...df821e36e7.jpg Next was to check how "elevator box" fit in fuselage and are wing tube and elevators tube parallel. https://cimg9.ibsrv.net/gimg/www.rcu...875ff02b61.jpg https://cimg3.ibsrv.net/gimg/www.rcu...721a5e1483.jpg https://cimg2.ibsrv.net/gimg/www.rcu...8e0e132648.jpg https://cimg5.ibsrv.net/gimg/www.rcu...3891ea60d0.jpg https://cimg6.ibsrv.net/gimg/www.rcu...00de8826c8.jpg https://cimg8.ibsrv.net/gimg/www.rcu...aa8ccb6cc8.jpg https://cimg7.ibsrv.net/gimg/www.rcu...0dcecddb11.jpg https://cimg1.ibsrv.net/gimg/www.rcu...017436b2fb.jpg To be continued... |
Rear fuselage part bottom side...
https://cimg5.ibsrv.net/gimg/www.rcu...24943f8080.jpg https://cimg8.ibsrv.net/gimg/www.rcu...caa2752163.jpg https://cimg6.ibsrv.net/gimg/www.rcu...675ec5c491.jpg https://cimg9.ibsrv.net/gimg/www.rcu...49010d85e6.jpg https://cimg1.ibsrv.net/gimg/www.rcu...b3583a6d8d.jpg https://cimg0.ibsrv.net/gimg/www.rcu...b86f3f7608.jpg https://cimg2.ibsrv.net/gimg/www.rcu...c8c432207e.jpg https://cimg4.ibsrv.net/gimg/www.rcu...04d8f81eee.jpg https://cimg3.ibsrv.net/gimg/www.rcu...6d6e2e8228.jpg https://cimg5.ibsrv.net/gimg/www.rcu...ea080293d7.jpg https://cimg6.ibsrv.net/gimg/www.rcu...2c99d416ec.jpg https://cimg7.ibsrv.net/gimg/www.rcu...29571d0bc3.jpg https://cimg8.ibsrv.net/gimg/www.rcu...d41d2e70f6.jpg https://cimg9.ibsrv.net/gimg/www.rcu...548991d9e5.jpg https://cimg0.ibsrv.net/gimg/www.rcu...b5ece4b776.jpg https://cimg1.ibsrv.net/gimg/www.rcu...10d7d29f0f.jpg https://cimg2.ibsrv.net/gimg/www.rcu...7a9366b92a.jpg https://cimg3.ibsrv.net/gimg/www.rcu...39c932a01f.jpg https://cimg4.ibsrv.net/gimg/www.rcu...2497f753d2.jpg |
I merged the front and back part of the fuselage and sanded everything.
https://cimg9.ibsrv.net/gimg/www.rcu...2edc808bce.jpg https://cimg2.ibsrv.net/gimg/www.rcu...2c41fa9ee8.jpg https://cimg6.ibsrv.net/gimg/www.rcu...70c49683b1.jpg https://cimg7.ibsrv.net/gimg/www.rcu...c7570a0c5f.jpg https://cimg8.ibsrv.net/gimg/www.rcu...ff99125b6a.jpg https://cimg0.ibsrv.net/gimg/www.rcu...4d981d0555.jpg https://cimg3.ibsrv.net/gimg/www.rcu...23f0591d1d.jpg https://cimg4.ibsrv.net/gimg/www.rcu...9af6ce6737.jpg https://cimg5.ibsrv.net/gimg/www.rcu...1e247eda7a.jpg https://cimg6.ibsrv.net/gimg/www.rcu...2217e83a0d.jpg https://cimg7.ibsrv.net/gimg/www.rcu...8cb80616b6.jpg https://cimg1.ibsrv.net/gimg/www.rcu...07c8bfa2eb.jpg https://cimg3.ibsrv.net/gimg/www.rcu...74e7f2f772.jpg https://cimg4.ibsrv.net/gimg/www.rcu...6d982ba0d3.jpg https://cimg9.ibsrv.net/gimg/www.rcu...23f9dc8e0d.jpg https://cimg0.ibsrv.net/gimg/www.rcu...b9cfdc52c7.jpg https://cimg1.ibsrv.net/gimg/www.rcu...c25df18999.jpg |
I wish I had the time for a project like this it really looks like a lot of fun to build.
|
Dear Mirce,
i have a question. What is the diameter of the aluminium tubes for the elevator and for the wings. Thank you for information Peter |
Diameter of wing tube is 30 mm and for elevators 16 mm.
Mirce |
Hi Mirce, what manufacturer for the landing gear are you designing theses kits around? Thanks TB |
Landing gears use in drawings are Behotec - C 50.
Mirce |
Dear Mirce,
i would like to come back to post #8. The writer is right, the nose gear position is very far away from scale. I think the ground handling of the model will be better with the actual position. But a F-100 must look like a F-100, even on ground. Please don't misunderstand me, you are doing a very nice job and the construction looks very good. I analized the construction and i think it could be possible to move the nose gear box back up to the seperation line of the two fuselage parts. The position then would not be exactly scale, but very much better. I flew a F-100D scale 1/7.2 for several years and i love this model. I'm thinking over to buy one. Peter |
Hello Peter, yes you are right.
As I told earlier, I got drawings and use it. Don't take care are nose gear on scale position, but as you told, it can be more backward. Why nose gear are on position where it is now I really don't know, maybe because better ground handling. Also, there are space to move nose gear backwards, if modeler want to have more scale model. This is huge model and have enough space. In that case split position of intake channels can be more inside. For me this is first F 100 I build, maybe on second I'll made some changes around nose gear and intake channels. But it is good for other modelers to see all this and change some things during building. Mirce |
Few photos of F 100 tool for vacuum machine and clear canopy...
https://cimg2.ibsrv.net/gimg/www.rcu...140bb7aadf.jpg https://cimg5.ibsrv.net/gimg/www.rcu...4af3ef96fa.jpg https://cimg4.ibsrv.net/gimg/www.rcu...930bd4230e.jpg https://cimg9.ibsrv.net/gimg/www.rcu...3d64774940.jpg https://cimg4.ibsrv.net/gimg/www.rcu...471d94090e.jpg https://cimg2.ibsrv.net/gimg/www.rcu...cdc9721672.jpg https://cimg1.ibsrv.net/gimg/www.rcu...082ecd1248.jpg https://cimg0.ibsrv.net/gimg/www.rcu...ef70b62cbb.jpg https://cimg6.ibsrv.net/gimg/www.rcu...095548da0d.jpg https://cimg8.ibsrv.net/gimg/www.rcu...72c4fcd0d5.jpg https://cimg3.ibsrv.net/gimg/www.rcu...6efdea9852.jpg |
After vacation works on "Mirce models" F 100 continued.
For tightening the cover of the turbine and the cabin on the model I will use 4 mm screws. https://cimg0.ibsrv.net/gimg/www.rcu...9945a66d1f.jpg https://cimg3.ibsrv.net/gimg/www.rcu...a8f0c0790f.jpg https://cimg1.ibsrv.net/gimg/www.rcu...952d583ee7.jpg https://cimg2.ibsrv.net/gimg/www.rcu...cc9045cb01.jpg Cabin cover... https://cimg3.ibsrv.net/gimg/www.rcu...ad27538cd0.jpg https://cimg9.ibsrv.net/gimg/www.rcu...b18d16e709.jpg https://cimg1.ibsrv.net/gimg/www.rcu...6cbce4bf3a.jpg https://cimg0.ibsrv.net/gimg/www.rcu...6b1898ce53.jpg https://cimg2.ibsrv.net/gimg/www.rcu...e007c65fe2.jpg After this step I can work on cabin cover, balsa slate near another... https://cimg9.ibsrv.net/gimg/www.rcu...b593b4e5ec.jpg https://cimg3.ibsrv.net/gimg/www.rcu...b37ea3eca6.jpg https://cimg4.ibsrv.net/gimg/www.rcu...358975e11c.jpg https://cimg5.ibsrv.net/gimg/www.rcu...ad0a6ae053.jpg https://cimg5.ibsrv.net/gimg/www.rcu...f138315e05.jpg https://cimg8.ibsrv.net/gimg/www.rcu...89cf65a05e.jpg https://cimg4.ibsrv.net/gimg/www.rcu...7000889141.jpg https://cimg1.ibsrv.net/gimg/www.rcu...fa6931c141.jpg https://cimg4.ibsrv.net/gimg/www.rcu...284a6ebb6e.jpg https://cimg7.ibsrv.net/gimg/www.rcu...195edc9a30.jpg https://cimg8.ibsrv.net/gimg/www.rcu...da2e25aca3.jpg https://cimg9.ibsrv.net/gimg/www.rcu...c8ba6c2c6f.jpg In the meantime, clear cabins arrived ... https://cimg2.ibsrv.net/gimg/www.rcu...65564e812b.jpg https://cimg0.ibsrv.net/gimg/www.rcu...e2e5ba8dc0.jpg To be continued... |
I have to hurry, because the F 100 is far more complete than in these pictures.
Rudder... https://cimg6.ibsrv.net/gimg/www.rcu...fd37ea3563.jpg https://cimg0.ibsrv.net/gimg/www.rcu...9e2cadadb5.jpg https://cimg9.ibsrv.net/gimg/www.rcu...46e9ea2dcb.jpg https://cimg8.ibsrv.net/gimg/www.rcu...15f0ad5129.jpg https://cimg2.ibsrv.net/gimg/www.rcu...38da461d53.jpg https://cimg5.ibsrv.net/gimg/www.rcu...997c5202f3.jpg https://cimg1.ibsrv.net/gimg/www.rcu...c88add9daf.jpg https://cimg7.ibsrv.net/gimg/www.rcu...8cdf0ea8f4.jpg https://cimg3.ibsrv.net/gimg/www.rcu...1845975310.jpg https://cimg5.ibsrv.net/gimg/www.rcu...d5868d0d80.jpg https://cimg2.ibsrv.net/gimg/www.rcu...2eb4140e9d.jpg https://cimg8.ibsrv.net/gimg/www.rcu...fc5ec62d10.jpg https://cimg9.ibsrv.net/gimg/www.rcu...245aef3206.jpg https://cimg1.ibsrv.net/gimg/www.rcu...8f811ddeaa.jpg https://cimg4.ibsrv.net/gimg/www.rcu...ed0eb68a16.jpg https://cimg9.ibsrv.net/gimg/www.rcu...4534e41060.jpg https://cimg5.ibsrv.net/gimg/www.rcu...db2c8503d7.jpg https://cimg0.ibsrv.net/gimg/www.rcu...c1f18265c3.jpg https://cimg1.ibsrv.net/gimg/www.rcu...5245859d14.jpg https://cimg2.ibsrv.net/gimg/www.rcu...dd1e57fef4.jpg https://cimg7.ibsrv.net/gimg/www.rcu...c9b2f40f93.jpg https://cimg8.ibsrv.net/gimg/www.rcu...f353f99c1c.jpg https://cimg9.ibsrv.net/gimg/www.rcu...903abf5bec.jpg https://cimg1.ibsrv.net/gimg/www.rcu...207d447b62.jpg |
Rudder - part II...
https://cimg6.ibsrv.net/gimg/www.rcu...78996ef750.jpg https://cimg7.ibsrv.net/gimg/www.rcu...e039f75bad.jpg https://cimg8.ibsrv.net/gimg/www.rcu...82c98e9a06.jpg https://cimg1.ibsrv.net/gimg/www.rcu...3f5bcf36fd.jpg https://cimg3.ibsrv.net/gimg/www.rcu...832872ef8e.jpg https://cimg3.ibsrv.net/gimg/www.rcu...384aac1605.jpg https://cimg0.ibsrv.net/gimg/www.rcu...4b75e10cf2.jpg Unfortunately, during the work in the workshop, I broke the last fuselage rib. That's why I made a cone at the end of the fuselage separately and then glued it. https://cimg2.ibsrv.net/gimg/www.rcu...750a6e0684.jpg https://cimg8.ibsrv.net/gimg/www.rcu...4814c9b762.jpg https://cimg6.ibsrv.net/gimg/www.rcu...c4a37de837.jpg https://cimg4.ibsrv.net/gimg/www.rcu...5d1dfa207c.jpg https://cimg0.ibsrv.net/gimg/www.rcu...a3c7891afc.jpg https://cimg5.ibsrv.net/gimg/www.rcu...2d5d7bdb91.jpg https://cimg9.ibsrv.net/gimg/www.rcu...d5a3c0b386.jpg https://cimg0.ibsrv.net/gimg/www.rcu...79cde25b4f.jpg https://cimg3.ibsrv.net/gimg/www.rcu...fe4c9af383.jpg Elevators are also finished... https://cimg8.ibsrv.net/gimg/www.rcu...700756f226.jpg https://cimg1.ibsrv.net/gimg/www.rcu...092823b66b.jpg https://cimg9.ibsrv.net/gimg/www.rcu...0e1a2327d3.jpg https://cimg0.ibsrv.net/gimg/www.rcu...491251d964.jpg https://cimg7.ibsrv.net/gimg/www.rcu...552b832dc6.jpg https://cimg6.ibsrv.net/gimg/www.rcu...060ea2e57f.jpg https://cimg7.ibsrv.net/gimg/www.rcu...5b0ba5978d.jpg https://cimg6.ibsrv.net/gimg/www.rcu...f2591ca629.jpg https://cimg8.ibsrv.net/gimg/www.rcu...fb9014fbb2.jpg |
F 100 wings ( continuation )...
On bottom side first I add servo holders. Servo carrier & cover - NS Modelers https://cimg9.ibsrv.net/gimg/www.rcu...0cff91df5f.jpg https://cimg7.ibsrv.net/gimg/www.rcu...4550d9b034.jpg Before planking with 3 mm balsa on the bottom side, I must insert in the wing pylon holders. The previous step was to make the pylons. One of offer from F 100 Super Sabre wooden kit is wing tank & pylon kit: F 100 - wing tanks & pylons - NS Modelers https://cimg6.ibsrv.net/gimg/www.rcu...3f2d162088.jpg https://cimg7.ibsrv.net/gimg/www.rcu...c3672d316d.jpg https://cimg8.ibsrv.net/gimg/www.rcu...afbc35435b.jpg I made pylons first, take care you have left and right pylon!!! https://cimg2.ibsrv.net/gimg/www.rcu...a8b9f8adaa.jpg https://cimg3.ibsrv.net/gimg/www.rcu...7e04969c8f.jpg https://cimg4.ibsrv.net/gimg/www.rcu...f16dc98c3d.jpg Now parts which come into the wing... https://cimg2.ibsrv.net/gimg/www.rcu...2a62369b1f.jpg https://cimg7.ibsrv.net/gimg/www.rcu...e809dded3f.jpg https://cimg4.ibsrv.net/gimg/www.rcu...53b762934a.jpg https://cimg5.ibsrv.net/gimg/www.rcu...28b7fa3b7e.jpg https://cimg6.ibsrv.net/gimg/www.rcu...0ef72bff82.jpg After bottom side planking... https://cimg0.ibsrv.net/gimg/www.rcu...99adee4cf4.jpg https://cimg1.ibsrv.net/gimg/www.rcu...7c70b140fd.jpg https://cimg2.ibsrv.net/gimg/www.rcu...569b7419da.jpg https://cimg3.ibsrv.net/gimg/www.rcu...914eadda52.jpg https://cimg4.ibsrv.net/gimg/www.rcu...b57cf3fed8.jpg You can see on photos, front and rear pylon side are made from balsa. Ply plates give shape, so it is easy for sand. Three bolts are for wing - pylon connection and two other holes are for wing tank. |
Wow, amazing work!
|
Hey, very nice ! But what are those little colored pins ? Where did you bought them ?
|
So now that most of the sheeting is done what is the weight on the air frame at this point?
Thanks Joe |
Small pins are from "Mibo model" hobby shop - Modelarske bucike Ø 0,6 x 20 mm 50 kos
About weight, I don't measure, but will do that in next few days... Mirce |
Wing trailing edge, flaps, ailerons & wing tip...
https://cimg6.ibsrv.net/gimg/www.rcu...2c1c99c28f.jpg https://cimg9.ibsrv.net/gimg/www.rcu...e3c3001643.jpg https://cimg7.ibsrv.net/gimg/www.rcu...5c2560dc74.jpg https://cimg0.ibsrv.net/gimg/www.rcu...4342629710.jpg https://cimg3.ibsrv.net/gimg/www.rcu...d90e59f9a4.jpg https://cimg6.ibsrv.net/gimg/www.rcu...de6f78e5db.jpg https://cimg1.ibsrv.net/gimg/www.rcu...069a59408b.jpg https://cimg5.ibsrv.net/gimg/www.rcu...0248884a3c.jpg https://cimg2.ibsrv.net/gimg/www.rcu...62b6c684d3.jpg https://cimg4.ibsrv.net/gimg/www.rcu...bed261d14c.jpg https://cimg7.ibsrv.net/gimg/www.rcu...e8fe1de64a.jpg https://cimg8.ibsrv.net/gimg/www.rcu...633140fc71.jpg https://cimg9.ibsrv.net/gimg/www.rcu...a3d55d8606.jpg https://cimg1.ibsrv.net/gimg/www.rcu...40e634ca33.jpg https://cimg9.ibsrv.net/gimg/www.rcu...632392151c.jpg https://cimg7.ibsrv.net/gimg/www.rcu...076d41ca06.jpg https://cimg8.ibsrv.net/gimg/www.rcu...f80bff4de0.jpg https://cimg3.ibsrv.net/gimg/www.rcu...6034b75a04.jpg https://cimg2.ibsrv.net/gimg/www.rcu...1ff37dedcd.jpg https://cimg2.ibsrv.net/gimg/www.rcu...68826e29f1.jpg https://cimg9.ibsrv.net/gimg/www.rcu...b5afbaad5d.jpg https://cimg3.ibsrv.net/gimg/www.rcu...da9bef1fef.jpg https://cimg0.ibsrv.net/gimg/www.rcu...806040a03c.jpg https://cimg1.ibsrv.net/gimg/www.rcu...339a3de285.jpg https://cimg5.ibsrv.net/gimg/www.rcu...e386cfa487.jpg |
Sweet!
|
I feel like a kid waiting for christmas waiting for updates on this thread every day! I don't have time to build myself but I love watching this thread as it's a real build. I miss having time to build. Can't wait for more!
|
All times are GMT -8. The time now is 05:02 PM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.