RE: Nitro models pusher Bobcat?
 

Was your classic NP Bobcat bounce on landing.

I had gone to idle about 3 feet above ground and when the mains hit the plane jumped up at a very nose high attitude like almost pointed vertical.
I gunned the throttle and then the plane rolled inverted (maybe from the torque or wing stall) and when that happened I went back to idle and she came down nose first from about 8' up.

Sorry no video [:'(]

RE: Nitro models pusher Bobcat?
 

Sounds like a classic too fast landing. :D

Mike

RE: Nitro models pusher Bobcat?
 

:D

RE: Nitro models pusher Bobcat?
 

Oh it most defiantly was. Was trying to get it on the ground and stopped in a short distance.

RE: Nitro models pusher Bobcat?
 

  Does anyone know where their are some complete build threads on this airplane?  i currently ordered one and its the red white blue one , looke really nice but i am looking for build thread or two  before i start on this one. thanks for any info. good flying!!

RE: Nitro models pusher Bobcat?
 

Hi guys...,
this is my project...


Jetcat P20....eflite retracts.... wheight 3.194gr with no fuel fuel tank 500cc and flies great!!!http://www.rcuniverse.com/forum/js/f.../thumbs_up.gifhttp://www.rcuniverse.com/forum/js/f...wink_smile.gif

RE: Nitro models pusher Bobcat?
 

Post No 3942 and you are asking for a build thread. :eek:

Mike

RE: Nitro models pusher Bobcat?
 

You should be able to find anything you need here plus there is a similar thread on RCGroups, but yes at 3945 posts you dont get a much better build thread!

RE: Nitro models pusher Bobcat?
 

I haven't seen the RCG thread. Could you post a link?

RE: Nitro models pusher Bobcat?
 

Bobcat
http://www.rcgroups.com/forums/showt...ghlight=bobcat

falcon 120
http://www.rcgroups.com/forums/showthread.php?t=718236

RE: Nitro models pusher Bobcat?
 

I'm a bit late to the party, has everyone gone home already?

Anyway, thought I'd post my maiden of my Bobcat 50 EDF version.

Quick summary:
114mm Haoye Ducted Fan, Neu 1512/2.5Y motor (1100kv),
6S Turnigy 5000mAh, 1.35KW,
Hitec Aurora 9 radio system

[link=http://www.youtube.com/watch?v=mNInoz4DmUU]Bobcat 50 Maiden[/link]

RE: Nitro models pusher Bobcat?
 

Hi everyone. I am seeking some parts for my Bobcat

Does anyone have, in any condition
1. Canopy
2. Engine mounts
3. The manual

I would prefer the parts for the yellow version but really I don't care. I will of course pay the postage

RE: Nitro models pusher Bobcat?
 

Anyway still reading this tread?
I have located the manual on line, but are still after a canopy and engine mount in any condition...

Thanks

RE: Nitro models pusher Bobcat?
 

This thread is not about a BVM Bobcat, but the Nitro Models version which is a clone generally known as the Falcon 120.

Mike

RE: Nitro models pusher Bobcat?
 

Actually, THIS thread is about the smaller 50 powered version, not the 120. - John.

RE: Nitro models pusher Bobcat?
 

Has anyone attempted to tint the canopy on the Bobcat 50? I have the yellow/blue/red kit. The canopy is clear and I'd like to tint it yellow. Has anyone had any success tinting the Bobcat 50 canopy with Rit dye?

RE: Nitro models pusher Bobcat?
 

Just a reminder to everyone that I am seeking a canopy for a bobcat - I don't care about condition

RE: Nitro models pusher Bobcat?
 

Do you still have it & it's broken or have you lost it?

Mine was broken, I repaired it, fitted a balsa base for support & painted it. - John.

RE: Nitro models pusher Bobcat?
 

Not so I am afraid John, it may well have morphed into the 50 version, but when it was started it was about the 120, if not why is it in the Jet Forum.

Mike

RE: Nitro models pusher Bobcat?
 

Parkflyerplastics.com has Falcon / Bobcat canopies.

They are clear unpainted plasitc, though you can do what you want with them.

RE: Nitro models pusher Bobcat?
 

opjose,

I looked on this website and didn't see anything that would work.

The "Falcon 56" canopy is far too small to fit my Bobcat. Am I looking in the wrong place perhaps?

RE: Nitro models pusher Bobcat?
 

I have found one at BVM jets, but it's not cheap

http://shopbvmjets.com/zencart/index...roducts_id=442

RE: Nitro models pusher Bobcat?
 

Which plane do you have?

RE: Nitro models pusher Bobcat?
 

Be careful, have you got the chinese Bobcat 50?

If so the canopy you show is for a BVM Bobcat, much bigger than the model you have.
Canopies can be trimmed to fit, of course, but the Bobcat 50 has a moulded recess
in the fuselage where the canopy fits, don't know if you can achieve a proper fit with a larger,
trimmed canopy.

I suppose it's in the jet forum because from page one people were discussing turbine conversions
of the smaller Bobcat 50 using a Wren 44, which I have in mine. No big deal, both the Bobcat 50 and
the Falcon 120 are low cost IC airframes convertable to turbine power. - John.

RE: Nitro models pusher Bobcat?
 

Ok not sure if this will help the opening on mine is 13 in (333mm) long x 3  1/4 (80mm) in the centre wide and I do have an 8mm lip all the way round. So I will email BVM Jets to see if I can get the size from them

Else anyone else go any idea's as $30 + postage is going to hurt