RE: Bob Cat Copy Falcon 120 Jet
ORIGINAL: ticketec Berri brand fruit juice bottle, holds 2.2lts $3.47 comes with free juice!:D Thanks Dave |
RE: Bob Cat Copy Falcon 120 Jet
can you do this with nitro fuel?
|
RE: Bob Cat Copy Falcon 120 Jet
i am driving my falcon with a 160FX so I dont need fancy retracts. what are my options for retracts? part numbers would be nice....
|
RE: Bob Cat Copy Falcon 120 Jet
what epoxy did you use?
|
RE: Bob Cat Copy Falcon 120 Jet
what epoxy did you use
ORIGINAL: alasdair I moulded my own from fibreglass & epoxy over a blue foam plug. Hold 2.3 litres. |
RE: Bob Cat Copy Falcon 120 Jet
I bought a set of retracts from dreamworks. Don't even want to say how much. LOL!!!
|
RE: Bob Cat Copy Falcon 120 Jet
I know what you mean, I have the Digitech ones and they cost more than the airframe. LOL
Mike |
RE: Bob Cat Copy Falcon 120 Jet
ORIGINAL: 5skyhawk172 I bought a set of retracts from dreamworks. Don't even want to say how much. LOL!!! |
RE: Bob Cat Copy Falcon 120 Jet
1 Attachment(s)
Several months later...I had to leave on a business trip and also my friend which is working on the Falcon. But I think the result is good! We have started to replace all eletronics and etc inside. By the way, thanks for all of you that posted pictures of the setup. It will be very helpful since is the first Jet I put together!
Have spectacular flights! Klaus |
RE: Bob Cat Copy Falcon 120 Jet
I have 2 of these falcon 120 jets. One is built with a super tiger 2300 in it with springair retracts and is a VERY FAST plane! The other I am going to set up with electric power. They do have flaps and are retract ready but come with fixed gear. GREAT PLANES FOR THE MONEY!!!
|
RE: Bob Cat Copy Falcon 120 Jet
ORIGINAL: Kansog Several months later...I had to leave on a business trip and also my friend which is working on the Falcon. But I think the result is good! We have started to replace all eletronics and etc inside. By the way, thanks for all of you that posted pictures of the setup. It will be very helpful since is the first Jet I put together! Have spectacular flights! Klaus Very nice work. |
RE: Bob Cat Copy Falcon 120 Jet
ORIGINAL: Dc2LightTech can you do this with nitro fuel? Why??? Half a gallon of nitro fuel would fly you for an hour or more. I'm sure it will fly much better if you keep it light. But... to answer your question... yes... it should work. |
RE: Bob Cat Copy Falcon 120 Jet
1 Attachment(s)
After some long time I finished my Falcon.
I had 1 flight with it today and everything went well. I have the P120 on it and it like a rocket, I opend it only one time to see the unlimeted vertical, the rest of the flight was someting lower than half trotlle. Next sunday I will make a video an post it on here. |
RE: Bob Cat Copy Falcon 120 Jet
<span style="background-color: rgba(255, 255, 255, 0);">Hey guys we have gotten so many orders for King Tech because of this special that we are giving even bigger discounts and extending the sale until Tuesday. Anybody buying a K80 or K100 will get $200 off, anybody buying a K140 will get $250 off and If you buy a K170 or K180 you get $300 off. For all the people who bought K170 and K180 I have given you an additional $100 off to your credited card. Spread the word if you refer anybody to use we will cut you a $50 check when they give me your name and number.
We also have the New K140G in stock andshipping. I have taken the liberty to upgrade everybody who ordered K140F to the new K140G for FREE. Christmas is early this year lol. I feelin Genrous. I will also give you a free F86 if you rather pay full price and get a $500 jet for free And to stirr the pot a little I will give $200 off any Jet Cat and Jet Central as well.</span> |
RE: Bob Cat Copy Falcon 120 Jet
ORIGINAL: gio After some long time I finished my Falcon. I had 1 flight with it today and everything went well. I have the P120 on it and it like a rocket, I opend it only one time to see the unlimeted vertical, the rest of the flight was someting lower than half trotlle. Next sunday I will make a video an post it on here. Mike |
RE: Bob Cat Copy Falcon 120 Jet
Be interesting to see if it stays together with all that power!
|
RE: Bob Cat Copy Falcon 120 Jet
Yep... the 120 is nutz.
I have an AT-180... and I don't like to give it more than half throttle. |
RE: Bob Cat Copy Falcon 120 Jet
ORIGINAL: Xairflyer Be interesting to see if it stays together with all that power! |
RE: Bob Cat Copy Falcon 120 Jet
i am driving my falcon with a 160FX so I dont need fancy retracts. what are my options for retracts? part numbers would be nice....
|
RE: Bob Cat Copy Falcon 120 Jet
If you want to stay simple and reliable I would recommend Spring Air 101HD's. Easy to set up with only one air line (air up, spring down), retracts come down if you loose air for some reason, and the retract package comes with everything you need (valves, tank, tubing, gear wires) except wheels and axles.
http://www.retracts.com/ http://www.retracts.com/Retrax_100.htm<br type="_moz" /> |
RE: Bob Cat Copy Falcon 120 Jet
thanks for the retracts tip! Ill have to go over at lunch time with my plane Tuesday[8D] (if they are open to the public)
|
RE: Bob Cat Copy Falcon 120 Jet
Spring air have certainly changed since I last used them, they only had wire leg options last time I looked, but the 900F set look just the job for the Falcon/Tornado, well spotted that man.
Mike |
RE: Bob Cat Copy Falcon 120 Jet
It was laminating epoxy of some sort, mixed 5:1 by weight.
Sorry but I do not remember the brand, or even the supplier. |
RE: Bob Cat Copy Falcon 120 Jet
how do you install the control horn on the inside of the flaps? (the back-plate)
|
RE: Bob Cat Copy Falcon 120 Jet
Just make a indentation in the wood with a flat object to give it some clearance, or just press down on the flap at the horn position. If you hinge them properly i.e. close to the lower surface as possible then the clearance needed for the black plate and screw heads isnt much.
|
All times are GMT -8. The time now is 08:41 AM. |
Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.