Need help identifying
#1
Senior Member
Thread Starter
Join Date: May 2008
Location: Seattle,
WA
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
Need help identifying
My neighbor got this from a friend and gave it to us, thinking we could do something with it. There's no engine with it now, but the guy who owned it said he would look for it. I no nothing about nitro vehicles, so any help identifying what make/model the truck is and what we need to get it running would be great. There are no markings at all or any indication as to who made it. Hopefully someone will recognize it.
#4
My Feedback: (3)
RE: Need help identifying
This may be beneficial to you if you are able to gather the engine and any other parts it needs.
Manual: http://manuals.hobbico.com/dtx/dtxc0073-manual.pdf
Exploded diagram: http://downloads.hobbico.com/evpl/dt...3-exploded.pdf
Manual: http://manuals.hobbico.com/dtx/dtxc0073-manual.pdf
Exploded diagram: http://downloads.hobbico.com/evpl/dt...3-exploded.pdf
#5
Senior Member
Thread Starter
Join Date: May 2008
Location: Seattle,
WA
Posts: 1,324
Likes: 0
Received 0 Likes
on
0 Posts
RE: Need help identifying
Thanks BKoz, that second one should be really helpful.
As you can see in the pictures, the tires are pretty cracked/falling apart. The nitro quake has 19mm hexes, and pretty much everything else is 17mm. The ID of the current 19mm hubs is 6mm, is there anything I can get that would fit? The hubs use a setscrew, not a pin through the shaft.
I found these, but it says the ID is 8mm.
http://www3.towerhobbies.com/cgi-bin...2&I=LXCVT7&P=K
These are the wheels are tires I was looking at. I'm not sure if the tires are the right size for the wheels though.
http://www3.towerhobbies.com/cgi-bin...I=L5MRD202&P=7 - Wheels
http://www3.towerhobbies.com/cgi-bin...?&I=LXMCZ5&P=M - Tires
http://www3.towerhobbies.com/cgi-bin...&I=LXLZP9&P=SM - Tires
http://www3.towerhobbies.com/cgi-bin...&I=LXDLB2&P=SM - Tires
As you can see in the pictures, the tires are pretty cracked/falling apart. The nitro quake has 19mm hexes, and pretty much everything else is 17mm. The ID of the current 19mm hubs is 6mm, is there anything I can get that would fit? The hubs use a setscrew, not a pin through the shaft.
I found these, but it says the ID is 8mm.
http://www3.towerhobbies.com/cgi-bin...2&I=LXCVT7&P=K
These are the wheels are tires I was looking at. I'm not sure if the tires are the right size for the wheels though.
http://www3.towerhobbies.com/cgi-bin...I=L5MRD202&P=7 - Wheels
http://www3.towerhobbies.com/cgi-bin...?&I=LXMCZ5&P=M - Tires
http://www3.towerhobbies.com/cgi-bin...&I=LXLZP9&P=SM - Tires
http://www3.towerhobbies.com/cgi-bin...&I=LXDLB2&P=SM - Tires