Brushless mt pirate
#1
Thread Starter
Brushless mt pirate
Been out of rc for a little while,
but recently came across of these trucks cheap,
was surprised how little the truck was marked for a used truck, underside is almost like new,
striped the Diffs, cleaned the grease out and put 50k front and rear,
Jammin/ofna x2 crt centre diff and associated diff/motor mount,
only had to drill 1 hole in chassis to get the mount lined up,
the motor is a 4174 2150kv beeman motor, just waiting on my new v2 trackstar 150a esc to arrive,
Anyone run one of these trucks brushless?
but recently came across of these trucks cheap,
was surprised how little the truck was marked for a used truck, underside is almost like new,
striped the Diffs, cleaned the grease out and put 50k front and rear,
Jammin/ofna x2 crt centre diff and associated diff/motor mount,
only had to drill 1 hole in chassis to get the mount lined up,
the motor is a 4174 2150kv beeman motor, just waiting on my new v2 trackstar 150a esc to arrive,
Anyone run one of these trucks brushless?
#4
Thread Starter
Got the truck finished,
found the stock tires to be very heavy and I didn't like the look of them, so came across a brand new set of kyosho mega force tires on ebay got the 4 for £7,
had to cut the opening larger as they were too tight on the rim,
used the stock monster pirate receiver box to house the esc in,
relocated it on top of the steering plate,
cut the side out and removed the lid to help with cooling,
Got a New v2 trackstar 150a esc,
soldered the wires to it and bench ran the truck, the esc worked as it should, but when I touched the steering the esc kept turning off,
i made myself a glitch buster, installed it and all bench testing worked perfectly,
trucks going for its first burst out tomorrow, I think it's going to be an animal lol
found the stock tires to be very heavy and I didn't like the look of them, so came across a brand new set of kyosho mega force tires on ebay got the 4 for £7,
had to cut the opening larger as they were too tight on the rim,
used the stock monster pirate receiver box to house the esc in,
relocated it on top of the steering plate,
cut the side out and removed the lid to help with cooling,
Got a New v2 trackstar 150a esc,
soldered the wires to it and bench ran the truck, the esc worked as it should, but when I touched the steering the esc kept turning off,
i made myself a glitch buster, installed it and all bench testing worked perfectly,
trucks going for its first burst out tomorrow, I think it's going to be an animal lol
#6
Thread Starter
runs too damn fast really lol,
First time I tried the truck it sorta got out of control in the first minute after I squeezed the trigger a little too much,
and took an awkward tumble which broke a lower rear a arm,
upon looking at the break in the a arm there was an air pocket in the middle of the break in the arm,
so I suppose it was a factory flaw waiting to be discovered,
after replacing that I took it for a proper run out on a large Tarmac area,
the truck ran perfectly, but it's a lot over geared, I need to go way up in spurgear count,
I'm looking at going from a 46t spurgear to a 54t spur,
Im running a kyosho centre diff so any kyosho spur will fit giving me plenty of gearing options,
the way it runs now is the truck cogs very slightly on start off and then the top speed is insane,
with even the slightest blip of the throttle lifting the front wheels in the air at any speed,
all this on 4s lipo, il post a link to a video once I sort the gearing out some.
First time I tried the truck it sorta got out of control in the first minute after I squeezed the trigger a little too much,
and took an awkward tumble which broke a lower rear a arm,
upon looking at the break in the a arm there was an air pocket in the middle of the break in the arm,
so I suppose it was a factory flaw waiting to be discovered,
after replacing that I took it for a proper run out on a large Tarmac area,
the truck ran perfectly, but it's a lot over geared, I need to go way up in spurgear count,
I'm looking at going from a 46t spurgear to a 54t spur,
Im running a kyosho centre diff so any kyosho spur will fit giving me plenty of gearing options,
the way it runs now is the truck cogs very slightly on start off and then the top speed is insane,
with even the slightest blip of the throttle lifting the front wheels in the air at any speed,
all this on 4s lipo, il post a link to a video once I sort the gearing out some.