Question about .15 Tmaxx engine
#1
Junior Member
Thread Starter
Join Date: Oct 2003
Location: olive branch, NE,
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Question about .15 Tmaxx engine
Can anyone tell me why an engine would spit fuel back up through the carb in little spurts as I try to start it. I ran it through 3 of the 4 break in tanks after installing a new piston and sleeve and now can't get it to start. Please give me your thoughts.
Ian
Ian
#2
Senior Member
My Feedback: (2)
Join Date: May 2003
Location: Pelham,
AL
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Question about .15 Tmaxx engine
You probably have the piston in backwards[X(]
If you need any help feel free to email me
[email protected]
If you need any help feel free to email me
[email protected]
#4
Senior Member
My Feedback: (2)
Join Date: May 2003
Location: Pelham,
AL
Posts: 223
Likes: 0
Received 0 Likes
on
0 Posts
RE: Question about .15 Tmaxx engine
I dont remember for sure but I dont think it will turn over if the plate is not right. I think the piston will hit the backplate and stop the piston. Not completely sure though. Sounds like the piston is backwards